Rolling 20220118

FeatureRequest.md

@@ -11,6 +11,12 @@
 
 ____
 
+#### #19 Extended log informations
+
+* https://github.com/jomjol/AI-on-the-edge-device/issues/580
+
+  
+
 #### #18 Document WLAN-strength in web page
 
 * https://github.com/jomjol/AI-on-the-edge-device/issues/563

README.md

@@ -54,6 +54,11 @@ In other cases you can contact the developer via email: <img src="https://raw.gi
 
 
 
+##### Rolling (2022-01-18)
+
+- Reduces camera clock speed to 5 MHz (instead of 20 MHz - `xclk_freq_hz =   5000000`)
+  
+
 ##### 10.2.0 - Stability Increase (2022-01-14)
 
 - **ATTENTION:** Due to the update camera driver, the image looks different and a new setup might be needed

code/components/jomjol_controlcamera/ClassControllCamera.cpp

@@ -73,8 +73,8 @@ static camera_config_t camera_config = {
     .pin_pclk = CAM_PIN_PCLK,
 
     //XCLK 20MHz or 10MHz for OV2640 double FPS (Experimental)
-    .xclk_freq_hz = 20000000,             // Orginalwert
-//    .xclk_freq_hz =    5000000,               // Test, um die Bildfehler los zu werden !!!!
+//    .xclk_freq_hz = 20000000,             // Orginalwert
+    .xclk_freq_hz =    5000000,               // Test, um die Bildfehler los zu werden !!!!
     .ledc_timer = LEDC_TIMER_0,
     .ledc_channel = LEDC_CHANNEL_0,
 

code/main/version.cpp

@@ -1,4 +1,4 @@
-const char* GIT_REV="8972f17";
-const char* GIT_TAG="";
-const char* GIT_BRANCH="master";
-const char* BUILD_TIME="2022-01-14 20:29";
+const char* GIT_REV="3a4b11e";
+const char* GIT_TAG="v10.2.0";
+const char* GIT_BRANCH="rolling";
+const char* BUILD_TIME="2022-01-18 07:13";

code/version.cpp

@@ -1,4 +1,4 @@
-const char* GIT_REV="8972f17";
-const char* GIT_TAG="";
-const char* GIT_BRANCH="master";
-const char* BUILD_TIME="2022-01-14 20:29";
+const char* GIT_REV="3a4b11e";
+const char* GIT_TAG="v10.2.0";
+const char* GIT_BRANCH="rolling";
+const char* BUILD_TIME="2022-01-18 07:13";