Add files via upload (#3207)

param-docs/parameter-pages/TakeImage/CamAeLevel.md

@@ -1,17 +1,22 @@
 # Parameter `CamAeLevel`
+
+**Auto-Exposure-Level**
+
+range on OV2640 (`-2` .. `2`)<br>
+range on OV3660 and OV5640 (`-5` .. `5`)
+
 Default Value: `0`
 
+See [here](../datasheets/Camera.ov2640_ds_1.8_.pdf) for the ov2640 camera datasheet.<br>
+See [here](../datasheets/OV5640_datasheet.pdf) for the ov5640 camera datasheet.
+
 !!! Warning
     This is an **Expert Parameter**! Only change it if you understand what it does!
 
 	After changing this parameter you need to update your reference image and alignment markers!
 
 !!! Note
-    This parameter can also be set on the Reference Image configuration page!
+    The exposure offset for automatic exposure, lower values produce darker image.
 
-**Auto Exposure Level**
-
-The exposure offset for automatic exposure, lower values produce darker image.
-
-available range on OV2640 (`-2` .. `2`)
-available range on OV3660 and OV5640 (`-5` .. `5`)
+!!! Note
+    This parameter can also be set on the Reference Image configuration page!

param-docs/parameter-pages/TakeImage/CamAec.md

@@ -1,6 +1,15 @@
 # Parameter `CamAec`
+
+**Auto-Exposure-Control**
+
+- When **true**, the camera attempts to automatically control the exposure.
+- When **false**, the **CamAecValue** setting is used instead.
+
 Default Value: `true`
-    
+
+See [here](../datasheets/Camera.ov2640_ds_1.8_.pdf) for the ov2640 camera datasheet.<br>
+See [here](../datasheets/OV5640_datasheet.pdf) for the ov5640 camera datasheet.
+
 !!! Warning
     This is an **Expert Parameter**! Only change it if you understand what it does!
 
@@ -8,9 +17,3 @@ Default Value: `true`
       
 !!! Note
     This parameter can also be set on the Reference Image configuration page!
-
-**Auto-Exposure Control**
-
-When **true**, the camera attempts to automatically control the exposure.
- 
-When **false**, the **CamAecValue** setting is used instead.

param-docs/parameter-pages/TakeImage/CamAec2.md

@@ -1,16 +1,22 @@
 # Parameter `CamAec2`
+
+**Auto-Exposure-Control2**
+
+- When **true**, the sensor’s "night mode" is enabled, extending the range of automatic gain control.
+- When **false**, the sensor’s "night mode" is disabled.
+
 Default Value: `true`
 
+See [here](../datasheets/Camera.ov2640_ds_1.8_.pdf) for the ov2640 camera datasheet.<br>
+See [here](../datasheets/OV5640_datasheet.pdf) for the ov5640 camera datasheet.
+
 !!! Warning
     This is an **Expert Parameter**! Only change it if you understand what it does!
 
 	After changing this parameter you need to update your reference image and alignment markers!
-      
+
+!!! Note
+    This may resolve some over-exposure and under-exposure issues.
+	
 !!! Note
     This parameter can also be set on the Reference Image configuration page!
-
-**Auto-Exposure Control 2**
-
-When **true**, the sensor’s "night mode" is enabled, extending the range of automatic gain control.
-
-This may resolve some over-exposure and under-exposure issues.

param-docs/parameter-pages/TakeImage/CamAecValue.md

@@ -1,16 +1,21 @@
 # Parameter `CamAecValue`
+
+**Auto-Exposure-Value**
+
+Range (`0` .. `1200`)
+
 Default Value: `160`
-    
+
+See [here](../datasheets/Camera.ov2640_ds_1.8_.pdf) for the ov2640 camera datasheet.<br>
+See [here](../datasheets/OV5640_datasheet.pdf) for the ov5640 camera datasheet.
+
 !!! Warning
     This is an **Expert Parameter**! Only change it if you understand what it does!
 
 	After changing this parameter you need to update your reference image and alignment markers!
-      
-!!! Note
-    This parameter can also be set on the Reference Image configuration page!
-
-**Auto Exposure Value**
 
-Access the exposure value of the camera, higher values produce brighter images.
+!!! Note
+    Access the exposure value of the camera, higher values produce brighter images.
 
-Range (`0` .. `1200`)
+!!! Note
+    This parameter can also be set on the Reference Image configuration page!

param-docs/parameter-pages/TakeImage/CamAgc.md

@@ -1,13 +1,16 @@
 # Parameter `CamAgc`
+
+**Auto-Gain-Control**
+
+- When **true**, the camera attempts to automatically control the sensor gain, up to the value in the **CamGainceiling** property.
+- When **false**, the **CamAgcGain** setting is used instead.
+
 Default Value: `true`
 
+See [here](../datasheets/Camera.ov2640_ds_1.8_.pdf) for the ov2640 camera datasheet.<br>
+See [here](../datasheets/OV5640_datasheet.pdf) for the ov5640 camera datasheet.
+
 !!! Warning
     This is an **Expert Parameter**! Only change it if you understand what it does!
 
     After changing this parameter you need to update your reference image and alignment markers!
-
-**Auto Gain**
-
-When **true**, the camera attempts to automatically control the sensor gain, up to the value in the **CamGainceiling** property.
-
-When **false**, the **CamAgcGain** setting is used instead.

param-docs/parameter-pages/TakeImage/CamAgcGain.md

@@ -1,6 +1,14 @@
 # Parameter `CamAgcGain`
+
+**Auto-Gain-Control-Value**
+
+Range (`0` .. `30`)
+
 Default Value: `15`
 
+See [here](../datasheets/Camera.ov2640_ds_1.8_.pdf) for the ov2640 camera datasheet.<br>
+See [here](../datasheets/OV5640_datasheet.pdf) for the ov5640 camera datasheet.
+
 !!! Warning
     This is an **Expert Parameter**! Only change it if you understand what it does!
 
@@ -9,8 +17,5 @@ Default Value: `15`
 !!! Note
     This is used when **CamAgc** is off.
 
-**Gain Manual Value**
-
-Access the gain level of the sensor, higher values produce brighter images.
-
-Range (`0` .. `30`)
+!!! Note
+    Access the gain level of the sensor, higher values produce brighter images.

param-docs/parameter-pages/TakeImage/CamAutoSharpness.md

@@ -1,17 +1,22 @@
 # Parameter `CamAutoSharpness`
+
+**Auto-Sharpness**
+
+- When **true**, the camera attempts to automatically adjusts the sharpness.
+- When **false**, the **CamSharpness** setting is used instead.
+
 Default Value: `false`
 
+See [here](../datasheets/Camera.ov2640_ds_1.8_.pdf) for the ov2640 camera datasheet.<br>
+See [here](../datasheets/OV5640_datasheet.pdf) for the ov5640 camera datasheet.
+
 !!! Warning
     This is an **Expert Parameter**! Only change it if you understand what it does!
 
 	After changing this parameter you need to update your reference image and alignment markers!
 
-!!! Note
-    This parameter can also be set on the Reference Image configuration page!
-
 !!! Note
     The OV2640 does not officially support auto sharpness, this is an experimental parameter!
 
-**AutoSharpness**
-
-When **true**, the camera attempts to automatically adjusts the sharpness.
+!!! Note
+    This parameter can also be set on the Reference Image configuration page!

param-docs/parameter-pages/TakeImage/CamAwb.md

@@ -1,13 +1,16 @@
 # Parameter `CamAwb`
+
+**Auto-White-Balance**
+ 
+- When **true**, the camera attempts to automatically control white balance.
+- When **false**, the **CamWbMode** setting is used instead.
+
 Default Value: `true`
 
+See [here](../datasheets/Camera.ov2640_ds_1.8_.pdf) for the ov2640 camera datasheet.<br>
+See [here](../datasheets/OV5640_datasheet.pdf) for the ov5640 camera datasheet.
+
 !!! Warning
     This is an **Expert Parameter**! Only change it if you understand what it does!
 
 	After changing this parameter you need to update your reference image and alignment markers!
-
-**Auto White Balance**
-
-When **true**, the camera attempts to automatically control white balance.
-
-When **false**, the **CamWbMode** setting is used instead.

param-docs/parameter-pages/TakeImage/CamAwbGain.md

@@ -1,11 +1,15 @@
 # Parameter `CamAwbGain`
-Default Value: ` `
-    
+
+**Auto-White-Balance-Gain**
+ 
+- Enable/Disable **CamAwbGain** control.
+
+Default Value: `true`
+
+See [here](../datasheets/Camera.ov2640_ds_1.8_.pdf) for the ov2640 camera datasheet.<br>
+See [here](../datasheets/OV5640_datasheet.pdf) for the ov5640 camera datasheet.
+
 !!! Warning
     This is an **Expert Parameter**! Only change it if you understand what it does!
 
     After changing this parameter you need to update your reference image and alignment markers!
-	
-**Auto White Balance Gain**
-
-Access the **CamAwbGain** property of the camera sensor.

param-docs/parameter-pages/TakeImage/CamBpc.md

@@ -1,11 +1,15 @@
 # Parameter `CamBpc`
+
+**Black-Pixel-Correction**
+
+- Enable/Disable **black point compensation**, this can make black parts of the image darker.
+
 Default Value: `true`
-    
+
+See [here](../datasheets/Camera.ov2640_ds_1.8_.pdf) for the ov2640 camera datasheet.<br>
+See [here](../datasheets/OV5640_datasheet.pdf) for the ov5640 camera datasheet.
+
 !!! Warning
     This is an **Expert Parameter**! Only change it if you understand what it does!
 
     After changing this parameter you need to update your reference image and alignment markers!
-
-**Black Pixel Correction**
-
-Enable/Disable **black point compensation**, this can make black parts of the image darker.

param-docs/parameter-pages/TakeImage/CamBrightness.md

@@ -1,14 +1,16 @@
 # Parameter `CamBrightness`
+
+**Image-Brightness**
+
+Range (`-2` .. `2`)
+
 Default Value: `0`
 
+See [here](../datasheets/Camera.ov2640_ds_1.8_.pdf) for the ov2640 camera datasheet.<br>
+See [here](../datasheets/OV5640_datasheet.pdf) for the ov5640 camera datasheet.
+
 !!! Warning
     After changing this parameter you need to update your reference image and alignment markers!
 
 !!! Note
     This parameter can also be set on the Reference Image configuration page!
-
-**Brightness**
-
-Positive values increase brightness, negative values lower it.
-
-Range (`-2` .. `2`) 

param-docs/parameter-pages/TakeImage/CamColorbar.md

@@ -1,9 +1,13 @@
 # Parameter `CamColorbar`
-Default Value: `false`
-    
-!!! Warning
-    This is an **Expert Parameter**! Only change it if you understand what it does!
 
 **Colorbar**
 
 currently not implemented.
+
+Default Value: `false`
+
+See [here](../datasheets/Camera.ov2640_ds_1.8_.pdf) for the ov2640 camera datasheet.<br>
+See [here](../datasheets/OV5640_datasheet.pdf) for the ov5640 camera datasheet.
+
+!!! Warning
+    This is an **Expert Parameter**! Only change it if you understand what it does!

param-docs/parameter-pages/TakeImage/CamContrast.md

@@ -1,14 +1,16 @@
 # Parameter `CamContrast`
+
+**Image-Contrast**
+
+Range (`-2` .. `2`)
+
 Default Value: `0`
 
+See [here](../datasheets/Camera.ov2640_ds_1.8_.pdf) for the ov2640 camera datasheet.<br>
+See [here](../datasheets/OV5640_datasheet.pdf) for the ov5640 camera datasheet.
+
 !!! Warning
     After changing this parameter you need to update your reference image and alignment markers!
 
 !!! Note
     This parameter can also be set on the Reference Image configuration page!
-
-**Contrast**
-
-Positive values increase contrast, negative values lower it.
-
-Range (`-2` .. `2`)

param-docs/parameter-pages/TakeImage/CamDcw.md

@@ -1,6 +1,15 @@
 # Parameter `CamDcw`
+
+**Image-Downsize**
+
+- When **CamDcw** is on, the image that you receive will be the size that you requested (VGA, QQVGA, etc).
+- When **CamDcw** is off, the image that you receive will be one of UXGA, SVGA, or CIF.
+
 Default Value: `true`
-    
+
+See [here](../datasheets/Camera.ov2640_ds_1.8_.pdf) for the ov2640 camera datasheet.<br>
+See [here](../datasheets/OV5640_datasheet.pdf) for the ov5640 camera datasheet.
+
 !!! Warning
     This is an **Expert Parameter**! Only change it if you understand what it does!
 
@@ -9,10 +18,4 @@ Default Value: `true`
 	If **CamZoom** is used, this must be activated.
 
 !!! Note
-    When **CamDcw** is on, the image that you receive will be the size that you requested (VGA, QQVGA, etc).
-    When **CamDcw** is off, the image that you receive will be one of UXGA, SVGA, or CIF. In other words, literally the actual image size as read from the sensor without any scaling.
-    Note that if **CamDcw** is off, and you pick a different image size, this implicitly turns **CamDcw** back on again (although this isn't reflected in the options). 
-
-**Downsize**
-
-Enable/Disable camera image scaling.
+    If **CamDcw** is off, and you pick a different image size, this implicitly turns **CamDcw** back on again. 

param-docs/parameter-pages/TakeImage/CamDenoise.md

@@ -1,11 +1,15 @@
 # Parameter `CamDenoise`
-Default Value: `0`
     
-!!! Warning
-    This is an **Expert Parameter**! Only change it if you understand what it does!
+**Image-Denoise**
+
+- Denoise Image, is only supported by OV3660 and OV5640
 
-**Denoise**
+range on OV3660 and OV5640 (0 .. 8)
 
-Denoise Image, is only supported by OV3660 and OV5640
+Default Value: `true`
 
-Range (`0` .. `8`)
+See [here](../datasheets/Camera.ov2640_ds_1.8_.pdf) for the ov2640 camera datasheet.<br>
+See [here](../datasheets/OV5640_datasheet.pdf) for the ov5640 camera datasheet.
+
+!!! Warning
+    This is an **Expert Parameter**! Only change it if you understand what it does!

param-docs/parameter-pages/TakeImage/CamGainceiling.md

@@ -1,21 +1,6 @@
 # Parameter `CamGainceiling`
-Default Value: `x4`
 
-!!! Warning
-    This is an **Expert Parameter**! Only change it if you understand what it does!
-
-    After changing this parameter you need to update your reference image and alignment markers!
-
-!!! Note
-    This is used when **CamAgc** is on.
-
-**CamGainceiling**
-
-The **Gain** is an analog multiplier applied to the raw sensor data.
-
-The **Ceiling** is the maximum gain value that the sensor will use.
-
-A higher gain means that the sensor has a greater response to light, but also makes sensor noise more visible.
+**Gain-Ceiling**
 
 Available options:
 
@@ -26,3 +11,23 @@ Available options:
 - `x32`
 - `x64`
 - `x128`
+
+Default Value for ov2640: `x4`<br>
+Default Value for ov5640: `x8`
+
+See [here](../datasheets/Camera.ov2640_ds_1.8_.pdf) for the ov2640 camera datasheet.<br>
+See [here](../datasheets/OV5640_datasheet.pdf) for the ov5640 camera datasheet.
+
+!!! Warning
+    This is an **Expert Parameter**! Only change it if you understand what it does!
+
+    After changing this parameter you need to update your reference image and alignment markers!
+
+!!! Note
+    A higher gain means that the sensor has a greater response to light, but also makes sensor noise more visible.
+	
+    This is used when **CamAgc** is on.
+
+!!! Note
+    The **Gain** is an analog multiplier applied to the raw sensor data.<br>
+    The **Ceiling** is the maximum gain value that the sensor will use.

param-docs/parameter-pages/TakeImage/CamHmirror.md

@@ -1,12 +1,16 @@
 # Parameter `CamHmirror`
+
+**Mirror-Image**
+
+- When **true**, the camera image is mirrored left-to-right.
+
 Default Value: `false`
 
+See [here](../datasheets/Camera.ov2640_ds_1.8_.pdf) for the ov2640 camera datasheet.<br>
+See [here](../datasheets/OV5640_datasheet.pdf) for the ov5640 camera datasheet.
+
 !!! Warning
     After changing this parameter you need to update your reference image and alignment markers!
 
 !!! Note
     This parameter can also be set on the Reference Image configuration page!
-
-**Mirror Image**
-
-When **true**, the camera image is mirrored left-to-right.

param-docs/parameter-pages/TakeImage/CamLenc.md

@@ -1,13 +1,18 @@
 # Parameter `CamLenc`
+
+**Lens-Correction**
+
+- Enable/Disable lens correction.
+
 Default Value: `true`
 
+See [here](../datasheets/Camera.ov2640_ds_1.8_.pdf) for the ov2640 camera datasheet.<br>
+See [here](../datasheets/OV5640_datasheet.pdf) for the ov5640 camera datasheet.
+
 !!! Warning
     This is an **Expert Parameter**! Only change it if you understand what it does!
 
     After changing this parameter you need to update your reference image and alignment markers!
 
-**Lens Correction**
-
-Enable/Disable lens correction.
-
-This can help compensate for light fall-off at the edge of the sensor area.
+!!! Note
+    This can help compensate for light fall-off at the edge of the sensor area.

param-docs/parameter-pages/TakeImage/CamQuality.md

@@ -1,19 +1,22 @@
 # Parameter `CamQuality`
+
+**Image-Quality**
+
+Range (`8` .. `63`)
+
 Default Value: `10`
 
+See [here](../datasheets/Camera.ov2640_ds_1.8_.pdf) for the ov2640 camera datasheet.<br>
+See [here](../datasheets/OV5640_datasheet.pdf) for the ov5640 camera datasheet.
+
 !!! Warning
     This is an **Expert Parameter**! Only change it if you understand what it does!
 
     After changing this parameter you need to update your reference image and alignment markers!
 
-!!! Warning
     Value below 10 could result in system instabilities!
 
 !!! Note
     Quality index for pictures: `8` (highest quality) ... `63` (lowest quality)
 
-**Image Quality**
-
-The **CamQuality** setting when capturing JPEG images.
-
-This is similar to the quality setting when exporting a jpeg image from photo editing software.
+    This is similar to the quality setting when exporting a jpeg image from photo editing software.

param-docs/parameter-pages/TakeImage/CamRawGma.md

@@ -1,5 +1,13 @@
 # Parameter `CamRawGma`
-Default Value: ` `
+
+**Raw-Gamma**
+
+- Enable/Disable raw gamma mode.
+
+Default Value: `true`
+
+See [here](../datasheets/Camera.ov2640_ds_1.8_.pdf) for the ov2640 camera datasheet.<br>
+See [here](../datasheets/OV5640_datasheet.pdf) for the ov5640 camera datasheet.
 
 !!! Warning
     This is an **Expert Parameter**! Only change it if you understand what it does!
@@ -7,11 +15,7 @@ Default Value: ` `
     After changing this parameter you need to update your reference image and alignment markers!
 
 !!! Note
-    The main purpose of the Gamma (GMA) function is to compensate for the non-linear characteristics of the sensor. GMA
-    converts the pixel values according to the Gamma curve to compensate the sensor output under different light strengths.
+    The main purpose of the Gamma (GMA) function is to compensate for the non-linear characteristics of the sensor. 
+	GMA converts the pixel values according to the Gamma curve to compensate the sensor output under different light strengths.
     The non-linear gamma curve is approximately constructed with different linear functions. Raw gamma compensates the
     image in the RAW domain.
-
-**Raw Gamma**
-
-Enable/Disable raw gamma mode.

param-docs/parameter-pages/TakeImage/CamSaturation.md

@@ -1,14 +1,19 @@
 # Parameter `CamSaturation`
+
+**Image-Saturation**
+
+Range (`-2` .. `2`)
+
 Default Value: `0`
 
+See [here](../datasheets/Camera.ov2640_ds_1.8_.pdf) for the ov2640 camera datasheet.<br>
+See [here](../datasheets/OV5640_datasheet.pdf) for the ov5640 camera datasheet.
+
 !!! Warning
     After changing this parameter you need to update your reference image and alignment markers!
 
 !!! Note
-    This parameter can also be set on the Reference Image configuration page!
+    Positive values increase saturation (more vibrant colors), negative values lower it (more muted colors).
 
-**Saturation**
-
-Positive values increase saturation (more vibrant colors), negative values lower it (more muted colors). 
-
-Range (`-2` .. `2`)
+!!! Note
+    This parameter can also be set on the Reference Image configuration page!

param-docs/parameter-pages/TakeImage/CamSharpness.md

@@ -1,22 +1,26 @@
 # Parameter `CamSharpness`
+
+**Image-Sharpness**
+
+Range (`-2` .. `2`)
+
 Default Value: `0`
 
+See [here](../datasheets/Camera.ov2640_ds_1.8_.pdf) for the ov2640 camera datasheet.<br>
+See [here](../datasheets/OV5640_datasheet.pdf) for the ov5640 camera datasheet.
+
 !!! Warning
     This is an **Expert Parameter**! Only change it if you understand what it does!
 
 	After changing this parameter you need to update your reference image and alignment markers!
 
-!!! Note
-    This parameter can also be set on the Reference Image configuration page!
-
 !!! Note
     The OV2640 does not officially support sharpness, this is an experimental parameter!
 	
 !!! Note
-    This is used when **CamAutoSharpness** is off.
+    Positive values increase sharpness (more defined edges), negative values lower it (softer edges).
 
-**Sharpness**
-
-Positive values increase sharpness (more defined edges), negative values lower it (softer edges). 
+    This is used when **CamAutoSharpness** is off.
 
-Range (`-2` .. `2`)
+!!! Note
+    This parameter can also be set on the Reference Image configuration page!

param-docs/parameter-pages/TakeImage/CamSpecialEffect.md

@@ -1,15 +1,6 @@
 # Parameter `CamSpecialEffect`
-Default Value: `no_effect`
-
-!!! Warning
-    This is an **Expert Parameter**! Only change it if you understand what it does!
-
-	After changing this parameter you need to update your reference image and alignment markers!
-      
-!!! Note
-    This parameter can also be set on the Reference Image configuration page!
 
-**SpecialEffect**
+**Image-Special-Effect**
 
 Available options:
 
@@ -20,3 +11,16 @@ Available options:
 - `green`
 - `blue`
 - `retro`
+
+Default Value: `no_effect`
+
+See [here](../datasheets/Camera.ov2640_ds_1.8_.pdf) for the ov2640 camera datasheet.<br>
+See [here](../datasheets/OV5640_datasheet.pdf) for the ov5640 camera datasheet.
+
+!!! Warning
+    This is an **Expert Parameter**! Only change it if you understand what it does!
+
+	After changing this parameter you need to update your reference image and alignment markers!
+      
+!!! Note
+    This parameter can also be set on the Reference Image configuration page!

param-docs/parameter-pages/TakeImage/CamVflip.md

@@ -1,15 +1,19 @@
 # Parameter `CamVflip`
+
+**Flip-Image**
+
+- When **true**, the camera image is flipped top-to-bottom.
+
 Default Value: `false`
 
+See [here](../datasheets/Camera.ov2640_ds_1.8_.pdf) for the ov2640 camera datasheet.<br>
+See [here](../datasheets/OV5640_datasheet.pdf) for the ov5640 camera datasheet.
+
 !!! Warning
     After changing this parameter you need to update your reference image and alignment markers!
 
-!!! Note
-    This parameter can also be set on the Reference Image configuration page!
-
 !!! Note
     On some OV5640 Cameras, the image becomes reddish when Vflip is used in conjunction with the zoom function!
 
-**Flip Image**
-
-When **true**, the camera image is flipped top-to-bottom.
+!!! Note
+    This parameter can also be set on the Reference Image configuration page!

param-docs/parameter-pages/TakeImage/CamWbMode.md

@@ -1,16 +1,6 @@
 # Parameter `CamWbMode`
-Default Value: `auto`
-
-!!! Warning
-    After changing this parameter you need to update your reference image and alignment markers!
 
-!!! Note
-    This parameter can also be set on the Reference Image configuration page!
-
-!!! Note
-    This is used when **CamAwb** is off.
-
-**White Balance Mode**
+**White-Balance-Mode**
 
 Available options:
 
@@ -19,3 +9,17 @@ Available options:
 - `cloudy`
 - `office`
 - `home`
+
+Default Value: `auto`
+
+See [here](../datasheets/Camera.ov2640_ds_1.8_.pdf) for the ov2640 camera datasheet.<br>
+See [here](../datasheets/OV5640_datasheet.pdf) for the ov5640 camera datasheet.
+
+!!! Warning
+    After changing this parameter you need to update your reference image and alignment markers!
+
+!!! Note
+    This is used when **CamAwb** is off.
+	
+!!! Note
+    This parameter can also be set on the Reference Image configuration page!

param-docs/parameter-pages/TakeImage/CamWpc.md

@@ -1,12 +1,16 @@
 # Parameter `CamWpc`
+
+**White-Pixel-Correction**
+
+- Enable/Disable **white point compensation**, his can make white parts of the image whiter.
+
 Default Value: `true`
 
+See [here](../datasheets/Camera.ov2640_ds_1.8_.pdf) for the ov2640 camera datasheet.<br>
+See [here](../datasheets/OV5640_datasheet.pdf) for the ov5640 camera datasheet.
+
 !!! Warning
     After changing this parameter you need to update your reference image and alignment markers!
 
 !!! Note
     This parameter can also be set on the Reference Image configuration page!
-
-**White Pixel Correction**
-
-Enable/Disable **white point compensation**, his can make white parts of the image whiter.

param-docs/parameter-pages/TakeImage/CamZoom.md

@@ -1,16 +1,21 @@
 # Parameter `CamZoom`
+
+**Digital-Zoom**
+
+- Enable/Disable digital zoom.
+
 Default Value: `false`
 
+See [here](../datasheets/Camera.ov2640_ds_1.8_.pdf) for the ov2640 camera datasheet.<br>
+See [here](../datasheets/OV5640_datasheet.pdf) for the ov5640 camera datasheet.
+
 !!! Warning
     This is an **Expert Parameter**! Only change it if you understand what it does!
 
 	After changing this parameter you need to update your reference image and alignment markers!
 
+!!! Note
+    It is always zoomed into the center of the image, if **CamZoomOffsetX** and **CamZoomOffsetY** are zero.
+	
 !!! Note
     This parameter can also be set on the Reference Image configuration page!
-
-**Zoom**
-
-Enable/Disable digital zoom.
-
-It is always zoomed into the center of the image, if **CamZoomOffsetX** and **CamZoomOffsetY** are zero.

param-docs/parameter-pages/TakeImage/CamZoomOffsetX.md

@@ -1,18 +1,25 @@
 # Parameter `CamZoomOffsetX`
+
+**Digital-Zoom-OffsetX**
+
+range on OV2640 (`-480` .. `480`)<br>
+range on OV3660 (`-704` .. `704`)<br>
+range on OV5640 (`-960` .. `960`)
+
 Default Value: `0`
 
+See [here](../datasheets/Camera.ov2640_ds_1.8_.pdf) for the ov2640 camera datasheet.<br>
+See [here](../datasheets/OV5640_datasheet.pdf) for the ov5640 camera datasheet.
+
 !!! Warning
     This is an **Expert Parameter**! Only change it if you understand what it does!
 
 	After changing this parameter you need to update your reference image and alignment markers!
 
+!!! Note
+    X displacement of the image from the center.<br>
+    Positive values ​​shift the image to the right, negative values ​​to the left.<br>
+    The maximum possible offset depends on the value of the **CamZoomSize**.
+	
 !!! Note
     This parameter can also be set on the Reference Image configuration page!
-
-**Zoom Offset X**
-
-X displacement of the image from the center.
-
-Positive values ​​shift the image to the right, negative values ​​to the left.
-
-The maximum possible offset depends on the value of the **CamZoomSize**.

param-docs/parameter-pages/TakeImage/CamZoomOffsetY.md

@@ -1,18 +1,25 @@
 # Parameter `CamZoomOffsetY`
+
+**Digital-Zoom-OffsetY**
+
+range on OV2640 (`-360` .. `360`)<br>
+range on OV3660 (`-528` .. `528`)<br>
+range on OV5640 (`-720` .. `720`)
+
 Default Value: `0`
 
+See [here](../datasheets/Camera.ov2640_ds_1.8_.pdf) for the ov2640 camera datasheet.<br>
+See [here](../datasheets/OV5640_datasheet.pdf) for the ov5640 camera datasheet.
+
 !!! Warning
     This is an **Expert Parameter**! Only change it if you understand what it does!
 
 	After changing this parameter you need to update your reference image and alignment markers!
 
+!!! Note
+    Y displacement of the image from the center.<br>
+    Positive values ​​move the image up, negative values ​​move the image down.<br>
+    The maximum possible offset depends on the value of the **CamZoomSize**.
+	
 !!! Note
     This parameter can also be set on the Reference Image configuration page!
-
-**Zoom Offset Y**
-
-Y displacement of the image from the center.
-
-Positive values ​​move the image up, negative values ​​move the image down.
-
-The maximum possible offset depends on the value of the **CamZoomSize**.

param-docs/parameter-pages/TakeImage/CamZoomSize.md

@@ -1,14 +1,23 @@
 # Parameter `CamZoomSize`
+
+**Digital-Zoom-Size**
+
+range on OV2640 (`0` .. `29`)<br>
+range on OV3660 (`0` .. `43`)<br>
+range on OV5640 (`0` .. `59`)
+
 Default Value: `0`
 
+See [here](../datasheets/Camera.ov2640_ds_1.8_.pdf) for the ov2640 camera datasheet.<br>
+See [here](../datasheets/OV5640_datasheet.pdf) for the ov5640 camera datasheet.
+
 !!! Warning
     This is an **Expert Parameter**! Only change it if you understand what it does!
 
 	After changing this parameter you need to update your reference image and alignment markers!
 
+!!! Note
+    Zoom factor/level of the digital zoom, the larger the value, the more it zooms in.
+	
 !!! Note
     This parameter can also be set on the Reference Image configuration page!
-
-**Zoom Size**
-
-Zoom factor/level of the digital zoom, the larger the value, the more it zooms in.

param-docs/parameter-pages/TakeImage/Demo.md

@@ -1,9 +1,10 @@
 # Parameter `Demo`
-Default Value: `false`
-
-!!! Warning
-    This is an **Expert Parameter**! Only change it if you understand what it does!
 
 Enable to use demo images instead of the real camera images.
 Make sure to have a `/demo` folder on your SD-Card and make sure it contains the expected files!
-Check [here](../Demo-Mode) for details. 
+Check [here](../Demo-Mode) for details.
+
+Default Value: `false`
+
+!!! Warning
+    This is an **Expert Parameter**! Only change it if you understand what it does! 

param-docs/parameter-pages/TakeImage/LEDIntensity.md

@@ -1,10 +1,11 @@
 # Parameter `LEDIntensity`
-Default Value: `50`
 
-!!! Note
-    This parameter can also be set on the Reference Image configuration page!
+Set the Flash LED Intensity: (`0` .. `100`)
+
+Default Value: `50`
 
 !!! Note
     After changing this parameter you need to update your reference image and alignment markers!
 
-Set the Flash LED Intensity: (`0` .. `100`)
+!!! Note
+    This parameter can also be set on the Reference Image configuration page!

param-docs/parameter-pages/TakeImage/RawImagesLocation.md

@@ -1,7 +1,8 @@
 # Parameter `RawImagesLocation`
-Default Value: `/log/source`
 
 Location on the SD-Card to store the raw images.
 
+Default Value: `/log/source`
+
 !!! Warning
     A SD-Card has limited write cycles. Since the device does not do [Wear Leveling](https://en.wikipedia.org/wiki/Wear_leveling), this can wear out your SD-Card!

param-docs/parameter-pages/TakeImage/RawImagesRetention.md

@@ -1,6 +1,7 @@
 # Parameter `RawImagesRetention`
-Default Value: `15`
+
+Number of days to keep the raw images (`0` = forever)
 
 Unit: Days
 
-Number of days to keep the raw images (`0` = forever)
+Default Value: `15`

param-docs/parameter-pages/TakeImage/WaitBeforeTakingPicture.md

@@ -1,9 +1,10 @@
 # Parameter `WaitBeforeTakingPicture`
-Default Value: `5`
+
+Waiting time between switching the flash light (onboard LED) on and taking the picture.
 
 Unit: seconds
 
+Default Value: `5`
+
 !!! Warning
     This is an **Expert Parameter**! Only change it if you understand what it does!
-
-Waiting time between switching the flash light (onboard LED) on and taking the picture.