Revert "Revert "System instable""

This reverts commit 1d9ef7e6343524cb4839bc180dd937a442279577.

Changelog.md

@@ -29,7 +29,7 @@
 -   [#1143](https://github.com/jomjol/AI-on-the-edge-device/issues/1143) changed postprocess for analog->digit (lowest digit processing)
 ### Removed
 
--   [#1261](https://github.com/jomjol/AI-on-the-edge-device/issues/1261) removed unused parameter `ErrorMessage`
+-   n.a.
 
 
 

code/components/jomjol_controlGPIO/Color.cpp

@@ -89,6 +89,15 @@ Rgb& Rgb::blend( Rgb in ) {
     return *this;
 }
 
+uint8_t IRAM_ATTR Rgb::getGrb( int idx ) {
+    switch ( idx ) {
+        case 0: return g;
+        case 1: return r;
+        case 2: return b;
+    }
+    __builtin_unreachable();
+}
+
 Hsv::Hsv( Rgb r ) {
     int min = std::min( r.r, std::min( r.g, r.b ) );
     int max = std::max( r.r, std::max( r.g, r.b ) );

code/components/jomjol_controlGPIO/Color.h

@@ -19,21 +19,13 @@ union Rgb {
     bool operator==( Rgb in ) const { return in.value == value; }
     Rgb& blend( Rgb in );
     void swap( Rgb& o ) {  value = o.value; }
-    constexpr Rgb(const Rgb& other) : r(other.r), g(other.g), b(other.b), a(other.a) { }
     void linearize() {
         r = channelGamma(r);
         g = channelGamma(g);
         b = channelGamma(b);
     }
 
-    uint8_t IRAM_ATTR getGrb( int idx ) {
-	switch ( idx ) {
-	case 0: return g;
-	case 1: return r;
-	case 2: return b;
-	}
-	__builtin_unreachable();
-    }
+    uint8_t IRAM_ATTR getGrb( int idx );
 
     void stretchChannels( uint8_t maxR, uint8_t maxG, uint8_t maxB ) {
         r = stretch( r, maxR );
@@ -62,7 +54,6 @@ private:
     }
 };
 
-
 union Hsv {
     struct __attribute__ ((packed)) {
         uint8_t h, s, v, a;
@@ -75,5 +66,4 @@ union Hsv {
     Hsv& operator=( Rgb rgb );
     bool operator==( Hsv in ) const { return in.value == value; }
     void swap( Hsv& o ) { value = o.value; }
-    constexpr Hsv(const Hsv& other) : h(other.h), s(other.s), v(other.v), a(other.a) { }
 };

code/components/jomjol_controlGPIO/SmartLeds.cpp

@@ -16,16 +16,16 @@ void IRAM_ATTR SmartLed::interruptHandler(void*) {
         if ( RMT.int_st.val & (1 << (24 + channel ) ) ) { // tx_thr_event
             if ( self )
                 self->copyRmtHalfBlock();
-            RMT.int_clr.val = RMT.int_clr.val | 1 << ( 24 + channel );
+            RMT.int_clr.val |= 1 << ( 24 + channel );
         } else if ( RMT.int_st.val & ( 1 << (3 * channel ) ) ) { // tx_end
             if ( self )
                 xSemaphoreGiveFromISR( self->_finishedFlag, nullptr );
-            RMT.int_clr.val = RMT.int_clr.val | 1 << ( 3 * channel );
+            RMT.int_clr.val |= 1 << ( 3 * channel );
         }
     }
 }
 
-void SmartLed::copyRmtHalfBlock() {
+void IRAM_ATTR SmartLed::copyRmtHalfBlock() {
     int offset = detail::MAX_PULSES * _halfIdx;
     _halfIdx = !_halfIdx;
     int len = 3 - _componentPosition + 3 * ( _count - 1 );

code/components/jomjol_controlGPIO/SmartLeds.h

@@ -56,14 +56,10 @@
         #include <freertos/semphr.h>
         #include <soc/dport_reg.h>
         #include <soc/gpio_sig_map.h>
-	#include <soc/gpio_periph.h>
-	#include <esp32/rom/gpio.h>
         #include <soc/rmt_struct.h>
         #include <driver/spi_master.h>
-	#include <driver/rmt.h>
     }
     #include <stdio.h>
-    extern rmt_mem_t RMTMEM;
 #endif
 
 #include "Color.h"
@@ -135,7 +131,8 @@ public:
         initChannel( _channel );
 
         RMT.tx_lim_ch[ _channel ].limit = detail::MAX_PULSES;
-	RMT.int_ena.val = RMT.int_ena.val | (1 << ( 24 + _channel )) | (1 << ( 3 * _channel ));
+        RMT.int_ena.val |= 1 << ( 24 + _channel );
+        RMT.int_ena.val |= 1 << ( 3 * _channel );
 
         _bitToRmt[ 0 ].level0 = 1;
         _bitToRmt[ 0 ].level1 = 0;

code/components/jomjol_controlGPIO/server_GPIO.cpp

@@ -108,7 +108,7 @@ void GpioPin::init()
     gpio_config(&io_conf);
 
 //    if (_interruptType != GPIO_INTR_DISABLE) {                // ohne GPIO_PIN_MODE_EXTERNAL_FLASH_WS281X, wenn das genutzt wird, dann soll auch der Handler hier nicht initialisiert werden, da das dann über SmartLED erfolgt.
-    if ((_interruptType != GPIO_INTR_DISABLE) && (_mode != GPIO_PIN_MODE_EXTERNAL_FLASH_WS281X)) {
+    if ((_interruptType != GPIO_INTR_DISABLE) && (_interruptType != GPIO_PIN_MODE_EXTERNAL_FLASH_WS281X)) {
         //hook isr handler for specific gpio pin
         ESP_LOGD(TAG_SERVERGPIO, "GpioPin::init add isr handler for GPIO %d", _gpio);
         gpio_isr_handler_add(_gpio, gpio_isr_handler, (void*)&_gpio);

code/components/jomjol_controlGPIO/server_GPIO.h

@@ -5,8 +5,6 @@
 
 #include <esp_http_server.h>
 #include <map>
-#include "hal/gpio_ll.h"
-#include "rom/gpio.h"
 #include "driver/gpio.h"
 
 #include "SmartLeds.h"
@@ -111,4 +109,4 @@ GpioHandler* gpio_handler_get();
 
 
 
-#endif //SERVER_GPIO_H
+#endif //SERVER_GPIO_H

code/components/jomjol_controlcamera/CMakeLists.txt

@@ -4,6 +4,6 @@ list(APPEND EXTRA_COMPONENT_DIRS $ENV{IDF_PATH}/examples/common_components/proto
 
 idf_component_register(SRCS ${app_sources}
                     INCLUDE_DIRS "."
-                    REQUIRES esp32-camera esp_timer esp_http_server jomjol_logfile jomjol_image_proc nvs_flash jomjol_fileserver_ota jomjol_controlGPIO)
+                    REQUIRES esp32-camera esp_http_server jomjol_logfile jomjol_image_proc nvs_flash jomjol_fileserver_ota jomjol_controlGPIO)
 
 

code/components/jomjol_controlcamera/ClassControllCamera.cpp

@@ -70,7 +70,41 @@
 
 static const char *TAGCAMERACLASS = "server_part_camera"; 
 
-static camera_config_t camera_config;
+static camera_config_t camera_config = {
+    .pin_pwdn = CAM_PIN_PWDN,
+    .pin_reset = CAM_PIN_RESET,
+    .pin_xclk = CAM_PIN_XCLK,
+    .pin_sscb_sda = CAM_PIN_SIOD,
+    .pin_sscb_scl = CAM_PIN_SIOC,
+
+    .pin_d7 = CAM_PIN_D7,
+    .pin_d6 = CAM_PIN_D6,
+    .pin_d5 = CAM_PIN_D5,
+    .pin_d4 = CAM_PIN_D4,
+    .pin_d3 = CAM_PIN_D3,
+    .pin_d2 = CAM_PIN_D2,
+    .pin_d1 = CAM_PIN_D1,
+    .pin_d0 = CAM_PIN_D0,
+    .pin_vsync = CAM_PIN_VSYNC,
+    .pin_href = CAM_PIN_HREF,
+    .pin_pclk = CAM_PIN_PCLK,
+
+    //XCLK 20MHz or 10MHz for OV2640 double FPS (Experimental)
+    .xclk_freq_hz = 20000000,             // Orginalwert
+//    .xclk_freq_hz =    5000000,               // Test, um die Bildfehler los zu werden !!!! Hängt in Version 9.2 !!!!
+    .ledc_timer = LEDC_TIMER_0,
+    .ledc_channel = LEDC_CHANNEL_0,
+
+    .pixel_format = PIXFORMAT_JPEG, //YUV422,GRAYSCALE,RGB565,JPEG
+    .frame_size = FRAMESIZE_VGA,    //QQVGA-UXGA Do not use sizes above QVGA when not JPEG
+//    .frame_size = FRAMESIZE_UXGA,    //QQVGA-UXGA Do not use sizes above QVGA when not JPEG
+    .jpeg_quality = 12, //0-63 lower number means higher quality
+    .fb_count = 1,       //if more than one, i2s runs in continuous mode. Use only with JPEG
+    .fb_location = CAMERA_FB_IN_PSRAM, /*!< The location where the frame buffer will be allocated */
+//    .grab_mode = CAMERA_GRAB_WHEN_EMPTY,
+    .grab_mode = CAMERA_GRAB_LATEST,      // erst ab neuer esp32cam-version
+    
+};
 
 
 #include "driver/ledc.h"
@@ -78,9 +112,6 @@ static camera_config_t camera_config;
 CCamera Camera;
 
 #define FLASH_GPIO GPIO_NUM_4
-#ifdef BLINK_GPIO
-#undef BLINK_GPIO
-#endif
 #define BLINK_GPIO GPIO_NUM_33
 
 typedef struct {
@@ -502,11 +533,7 @@ esp_err_t CCamera::CaptureToHTTP(httpd_req_t *req, int delay)
     esp_camera_fb_return(fb);
     int64_t fr_end = esp_timer_get_time();
     
-#if (ESP_IDF_VERSION >= ESP_IDF_VERSION_VAL(5, 0, 0))
-    ESP_LOGI(TAGCAMERACLASS, "JPG: %luKB %lums", (uint32_t)(fb_len/1024), (uint32_t)((fr_end - fr_start)/1000));
-#else
     ESP_LOGI(TAGCAMERACLASS, "JPG: %uKB %ums", (uint32_t)(fb_len/1024), (uint32_t)((fr_end - fr_start)/1000));
-#endif
 
     if (delay > 0) 
     {
@@ -645,40 +672,6 @@ CCamera::CCamera()
 esp_err_t CCamera::InitCam()
 {
     ESP_LOGD(TAGCAMERACLASS, "Init Camera");
-
-    camera_config.pin_pwdn = CAM_PIN_PWDN;
-    camera_config.pin_reset = CAM_PIN_RESET;
-    camera_config.pin_xclk = CAM_PIN_XCLK;
-    camera_config.pin_sccb_sda = CAM_PIN_SIOD;
-    camera_config.pin_sccb_scl = CAM_PIN_SIOC;
-
-    camera_config.pin_d7 = CAM_PIN_D7;
-    camera_config.pin_d6 = CAM_PIN_D6;
-    camera_config.pin_d5 = CAM_PIN_D5;
-    camera_config.pin_d4 = CAM_PIN_D4;
-    camera_config.pin_d3 = CAM_PIN_D3;
-    camera_config.pin_d2 = CAM_PIN_D2;
-    camera_config.pin_d1 = CAM_PIN_D1;
-    camera_config.pin_d0 = CAM_PIN_D0;
-    camera_config.pin_vsync = CAM_PIN_VSYNC;
-    camera_config.pin_href = CAM_PIN_HREF;
-    camera_config.pin_pclk = CAM_PIN_PCLK;
-
-    //XCLK 20MHz or 10MHz for OV2640 double FPS (Experimental)
-    camera_config.xclk_freq_hz = 20000000;             // Orginalwert
-//    camera_config.xclk_freq_hz =    5000000;               // Test, um die Bildfehler los zu werden !!!! Hängt in Version 9.2 !!!!
-    camera_config.ledc_timer = LEDC_TIMER_0;
-    camera_config.ledc_channel = LEDC_CHANNEL_0;
-
-    camera_config.pixel_format = PIXFORMAT_JPEG; //YUV422,GRAYSCALE,RGB565,JPEG
-    camera_config.frame_size = FRAMESIZE_VGA;    //QQVGA-UXGA Do not use sizes above QVGA when not JPEG
-//    camera_config.frame_size = FRAMESIZE_UXGA;    //QQVGA-UXGA Do not use sizes above QVGA when not JPEG
-    camera_config.jpeg_quality = 12; //0-63 lower number means higher quality
-    camera_config.fb_count = 1;       //if more than one, i2s runs in continuous mode. Use only with JPEG
-    camera_config.fb_location = CAMERA_FB_IN_PSRAM; /*!< The location where the frame buffer will be allocated */
-//    camera_config.grab_mode = CAMERA_GRAB_WHEN_EMPTY;
-    camera_config.grab_mode = CAMERA_GRAB_LATEST;      // erst ab neuer esp32cam-version
-
     ActualQuality = camera_config.jpeg_quality;
     ActualResolution = camera_config.frame_size;
     //initialize the camera

code/components/jomjol_fileserver_ota/CMakeLists.txt

@@ -2,6 +2,6 @@ FILE(GLOB_RECURSE app_sources ${CMAKE_CURRENT_SOURCE_DIR}/*.*)
 
 idf_component_register(SRCS ${app_sources}
                     INCLUDE_DIRS "." "../../include"
-                    REQUIRES tflite-lib esp_http_server bootloader_support app_update esp_http_client vfs nvs_flash jomjol_tfliteclass jomjol_flowcontroll spiffs jomjol_helper jomjol_controlGPIO)
+                    REQUIRES tflite-lib esp_http_server app_update esp_http_client nvs_flash jomjol_tfliteclass jomjol_flowcontroll spiffs jomjol_helper jomjol_controlGPIO)
 
 

code/components/jomjol_fileserver_ota/miniz.c

@@ -3076,9 +3076,7 @@ static FILE *mz_freopen(const char *pPath, const char *pMode, FILE *pStream)
 #define MZ_DELETE_FILE remove
 
 #else
-#if 0
 #pragma message("Using fopen, ftello, fseeko, stat() etc. path for file I/O - this path may not support large files.")
-#endif
 #ifndef MINIZ_NO_TIME
 #include <utime.h>
 #endif

code/components/jomjol_fileserver_ota/server_ota.cpp

@@ -3,6 +3,7 @@
 #include <string>
 #include "string.h"
 
+#include <esp_int_wdt.h>
 #include <esp_task_wdt.h>
 
 
@@ -16,9 +17,7 @@
 #include <esp_ota_ops.h>
 #include "esp_http_client.h"
 #include "esp_flash_partitions.h"
-#include "esp_vfs.h"
 #include "esp_partition.h"
-#include "esp_app_format.h"
 #include <nvs.h>
 #include "nvs_flash.h"
 #include "driver/gpio.h"
@@ -79,28 +78,16 @@ static bool ota_update_task(std::string fn)
     const esp_partition_t *running = esp_ota_get_running_partition();
 
     if (configured != running) {
-#if (ESP_IDF_VERSION >= ESP_IDF_VERSION_VAL(5, 0, 0))
-        ESP_LOGW(TAGPARTOTA, "Configured OTA boot partition at offset 0x%08lx, but running from offset 0x%08lx",
-#else
         ESP_LOGW(TAGPARTOTA, "Configured OTA boot partition at offset 0x%08x, but running from offset 0x%08x",
-#endif
                  configured->address, running->address);
         ESP_LOGW(TAGPARTOTA, "(This can happen if either the OTA boot data or preferred boot image become somehow corrupted.)");
     }
-#if (ESP_IDF_VERSION >= ESP_IDF_VERSION_VAL(5, 0, 0))
-    ESP_LOGI(TAGPARTOTA, "Running partition type %d subtype %d (offset 0x%08lx)",
-#else
     ESP_LOGI(TAGPARTOTA, "Running partition type %d subtype %d (offset 0x%08x)",
-#endif
              running->type, running->subtype, running->address);
 
 
     update_partition = esp_ota_get_next_update_partition(NULL);
-#if (ESP_IDF_VERSION >= ESP_IDF_VERSION_VAL(5, 0, 0))
-    ESP_LOGI(TAGPARTOTA, "Writing to partition subtype %d at offset 0x%lx",
-#else
     ESP_LOGI(TAGPARTOTA, "Writing to partition subtype %d at offset 0x%x",
-#endif
              update_partition->subtype, update_partition->address);
 //    assert(update_partition != NULL);
 
@@ -487,17 +474,7 @@ esp_err_t handler_ota_update(httpd_req_t *req)
 };
 
 void hard_restart() {
-
-#if (ESP_IDF_VERSION >= ESP_IDF_VERSION_VAL(5, 0, 0))
-  esp_task_wdt_config_t wd_config;
-  wd_config.timeout_ms = 1000;
-  wd_config.idle_core_mask = (1 << portNUM_PROCESSORS) - 1;    // Bitmask of all cores
-  wd_config.trigger_panic = true;
-
-  esp_task_wdt_init(&wd_config);
-#else
   esp_task_wdt_init(1,true);
-#endif
   esp_task_wdt_add(NULL);
   while(true);
 }

code/components/jomjol_flowcontroll/ClassFlowMQTT.cpp

@@ -13,7 +13,7 @@
 
 #define __HIDE_PASSWORD
 
-//static const char *TAG = "class_flow_MQTT";
+static const char *TAG = "class_flow_MQTT";
 
 #define LWT_TOPIC        "connection"
 #define LWT_CONNECTED    "connected"
@@ -143,11 +143,7 @@ void publishRuntimeData(std::string maintopic, int SetRetainFlag) {
     sprintf(tmp_char, "%ld", (long)getUpTime());
     MQTTPublish(maintopic + "/" + "uptime", std::string(tmp_char), SetRetainFlag);
     
-#if (ESP_IDF_VERSION >= ESP_IDF_VERSION_VAL(5, 0, 0))
-    sprintf(tmp_char, "%lu", esp_get_free_heap_size());
-#else
     sprintf(tmp_char, "%zu", esp_get_free_heap_size());
-#endif
     MQTTPublish(maintopic + "/" + "freeMem", std::string(tmp_char), SetRetainFlag);
 
     sprintf(tmp_char, "%d", get_WIFI_RSSI());

code/components/jomjol_flowcontroll/ClassFlowMakeImage.h

@@ -4,9 +4,7 @@
 
 #include <string>
 
-#ifndef BLINK_GPIO
 #define BLINK_GPIO GPIO_NUM_4
-#endif
 
 #define CAMERA_MODEL_AI_THINKER
 

code/components/jomjol_helper/Helper.cpp

@@ -25,7 +25,6 @@ extern "C" {
 #include "ClassLogFile.h"
 
 #include "esp_vfs_fat.h"
-#include "esp_mac.h"
 
 static const char* TAG = "helper";
 
@@ -117,11 +116,7 @@ string getSDCardPartitionAllocationSize(){
     f_getfree("0:", (DWORD *)&fre_clust, &fs);
     allocation_size = fs->ssize;
 
-#if (ESP_IDF_VERSION >= ESP_IDF_VERSION_VAL(5, 0, 0))
-    printf("SD Card Partition Allocation Size (bytes): %lu)\n", allocation_size);
-#else
-    printf("SD Card Partition Allocation Size (bytes): %zu)\n", allocation_size);
-#endif
+    printf("SD Card Partition Allocation Size (bytes): %d)\n", allocation_size);
 
 	return std::to_string(allocation_size);
 }

code/components/jomjol_influxdb/interface_influxdb.cpp

@@ -41,24 +41,19 @@ static esp_err_t http_event_handler(esp_http_client_event_t *evt)
          case HTTP_EVENT_DISCONNECTED:
             ESP_LOGI(TAG_INTERFACEINFLUXDB, "HTTP Client Disconnected");
             break;
-#if (ESP_IDF_VERSION >= ESP_IDF_VERSION_VAL(5, 0, 0))
-	case HTTP_EVENT_REDIRECT:
-            ESP_LOGI(TAG_INTERFACEINFLUXDB, "HTTP Client Redirect");
-	    break;
-#endif
     }
     return ESP_OK;
 }
 
 void InfluxDBPublish(std::string _key, std::string _content, std::string _timestamp) {
     char response_buffer[MAX_HTTP_OUTPUT_BUFFER] = {0};
-    esp_http_client_config_t http_config;
-
-    http_config.user_agent = "ESP32 Meter reader";
-    http_config.method = HTTP_METHOD_POST;
-    http_config.event_handler = http_event_handler;
-    http_config.buffer_size = MAX_HTTP_OUTPUT_BUFFER;
-    http_config.user_data = response_buffer;
+    esp_http_client_config_t http_config = {
+       .user_agent = "ESP32 Meter reader",
+       .method = HTTP_METHOD_POST,
+       .event_handler = http_event_handler,
+       .buffer_size = MAX_HTTP_OUTPUT_BUFFER,
+       .user_data = response_buffer
+    };
 
     if (_influxDBUser.length() && _influxDBPassword.length()){
        http_config.username = _influxDBUser.c_str();

code/components/jomjol_mqtt/interface_mqtt.cpp

@@ -116,11 +116,7 @@ static esp_err_t mqtt_event_handler_cb(esp_mqtt_event_handle_t event)
 }
 
 static void mqtt_event_handler(void *handler_args, esp_event_base_t base, int32_t event_id, void *event_data) {
-#if (ESP_IDF_VERSION >= ESP_IDF_VERSION_VAL(5, 0, 0))
-    ESP_LOGD(TAG_INTERFACEMQTT, "Event dispatched from event loop base=%s, event_id=%ld", base, event_id);
-#else
     ESP_LOGD(TAG_INTERFACEMQTT, "Event dispatched from event loop base=%s, event_id=%d", base, event_id);
-#endif
     mqtt_event_handler_cb((esp_mqtt_event_handle_t) event_data);
 }
 
@@ -153,7 +149,6 @@ void MQTT_Configure(std::string _mqttURI, std::string _clientid, std::string _us
 }
 
 bool MQTT_Init() {
-    esp_mqtt_client_config_t mqtt_cfg;
     esp_err_t ret;
     LogFile.WriteToFile(ESP_LOG_INFO, "MQTT - Init");
 
@@ -161,33 +156,19 @@ bool MQTT_Init() {
 
     std::string lw = lwt_disconnected;
 
-#if (ESP_IDF_VERSION >= ESP_IDF_VERSION_VAL(5, 0, 0))
-    mqtt_cfg.broker.address.uri = uri.c_str();
-    mqtt_cfg.credentials.client_id = client_id.c_str();
-    mqtt_cfg.session.last_will.topic = lwt_topic.c_str();
-    mqtt_cfg.session.last_will.msg = lw.c_str();
-    mqtt_cfg.session.last_will.msg_len = (int)(lw.length());
-    mqtt_cfg.session.last_will.retain = 1;
-    mqtt_cfg.session.keepalive = keepalive;
-#else
-    mqtt_cfg.uri = uri.c_str();
-    mqtt_cfg.client_id = client_id.c_str();
-    mqtt_cfg.lwt_topic = lwt_topic.c_str();
-    mqtt_cfg.lwt_msg = lw.c_str();
-    mqtt_cfg.lwt_retain = 1;
-    mqtt_cfg.lwt_msg_len = (int)(lw.length());
-    mqtt_cfg.keepalive = keepalive;
-#endif
+    esp_mqtt_client_config_t mqtt_cfg = {
+        .uri = uri.c_str(),
+        .client_id = client_id.c_str(),
+        .lwt_topic = lwt_topic.c_str(),
+        .lwt_msg = lw.c_str(),
+        .lwt_retain = 1,
+        .lwt_msg_len = (int)(lw.length()),
+        .keepalive = keepalive
+    };
 
     if (user.length() && password.length()){
-#if (ESP_IDF_VERSION >= ESP_IDF_VERSION_VAL(5, 0, 0))
-        mqtt_cfg.credentials.username = user.c_str();
-        mqtt_cfg.credentials.authentication.password = password.c_str();
-	mqtt_cfg.credentials.authentication.key_password_len = password.length();
-#else
         mqtt_cfg.username = user.c_str();
         mqtt_cfg.password = password.c_str();
-#endif
     };
 
     client = esp_mqtt_client_init(&mqtt_cfg);

code/components/jomjol_tfliteclass/server_tflite.cpp

@@ -12,7 +12,6 @@
 #include "Helper.h"
 
 #include "esp_camera.h"
-#include "esp_timer.h"
 #include "time_sntp.h"
 #include "ClassControllCamera.h"
 
@@ -812,17 +811,11 @@ void register_server_tflite_uri(httpd_handle_t server)
     camuri.user_ctx  = (void*) "Light On";    
     httpd_register_uri_handler(server, &camuri);
 
-    // Legacy API => New: "/setPreValue"
     camuri.uri       = "/setPreValue.html";
     camuri.handler   = handler_prevalue;
     camuri.user_ctx  = (void*) "Prevalue";    
     httpd_register_uri_handler(server, &camuri);
 
-    camuri.uri       = "/setPreValue";
-    camuri.handler   = handler_prevalue;
-    camuri.user_ctx  = (void*) "Prevalue";    
-    httpd_register_uri_handler(server, &camuri);
-
     camuri.uri       = "/doflow";
     camuri.handler   = handler_doflow;
     camuri.user_ctx  = (void*) "Light Off"; 
@@ -832,51 +825,27 @@ void register_server_tflite_uri(httpd_handle_t server)
     camuri.handler   = handler_statusflow;
     camuri.user_ctx  = (void*) "Light Off"; 
     httpd_register_uri_handler(server, &camuri);  
-
-    camuri.uri       = "/statusflow";
-    camuri.handler   = handler_statusflow;
-    camuri.user_ctx  = (void*) "Light Off";
-    httpd_register_uri_handler(server, &camuri);
-
-    // Legacy API => New: "/cpu_temperature"
+    
     camuri.uri       = "/cputemp.html";
     camuri.handler   = handler_cputemp;
-    camuri.user_ctx  = (void*) "Light Off";
-    httpd_register_uri_handler(server, &camuri);
-
-    camuri.uri       = "/cpu_temperature";
-    camuri.handler   = handler_cputemp;
     camuri.user_ctx  = (void*) "Light Off"; 
     httpd_register_uri_handler(server, &camuri);  
 
-    // Legacy API => New: "/rssi"
     camuri.uri       = "/rssi.html";
     camuri.handler   = handler_rssi;
     camuri.user_ctx  = (void*) "Light Off"; 
     httpd_register_uri_handler(server, &camuri);  
 
-    camuri.uri       = "/rssi";
-    camuri.handler   = handler_rssi;
-    camuri.user_ctx  = (void*) "Light Off";
-    httpd_register_uri_handler(server, &camuri);
-
     camuri.uri       = "/editflow.html";
     camuri.handler   = handler_editflow;
     camuri.user_ctx  = (void*) "EditFlow"; 
     httpd_register_uri_handler(server, &camuri);     
 
-    // Legacy API => New: "/value"
     camuri.uri       = "/value.html";
     camuri.handler   = handler_wasserzaehler;
-    camuri.user_ctx  = (void*) "Value";
-    httpd_register_uri_handler(server, &camuri);
-
-    camuri.uri       = "/value";
-    camuri.handler   = handler_wasserzaehler;
     camuri.user_ctx  = (void*) "Value"; 
     httpd_register_uri_handler(server, &camuri);  
 
-    // Legacy API => New: "/value"
     camuri.uri       = "/wasserzaehler.html";
     camuri.handler   = handler_wasserzaehler;
     camuri.user_ctx  = (void*) "Wasserzaehler"; 

code/components/jomjol_time_sntp/time_sntp.cpp

@@ -7,6 +7,7 @@
 #include "freertos/task.h"
 #include "freertos/event_groups.h"
 #include "esp_system.h"
+#include "esp_event.h"
 #include "esp_log.h"
 #include "esp_attr.h"
 #include "esp_sleep.h"
@@ -137,4 +138,4 @@ time_t getUpTime()
     time(&now);
 
     return now - bootTime;
-}
+}

code/components/jomjol_time_sntp/time_sntp.h

@@ -5,6 +5,7 @@
 #include "freertos/task.h"
 #include "freertos/event_groups.h"
 #include "esp_system.h"
+#include "esp_event.h"
 #include "esp_log.h"
 #include "esp_attr.h"
 #include "esp_sleep.h"

code/components/jomjol_wlan/CMakeLists.txt

@@ -2,6 +2,6 @@ FILE(GLOB_RECURSE app_sources ${CMAKE_CURRENT_SOURCE_DIR}/*.*)
 
 idf_component_register(SRCS ${app_sources}
                     INCLUDE_DIRS "."
-                    REQUIRES esp_wifi nvs_flash jomjol_helper)
+                    REQUIRES nvs_flash jomjol_helper)
 
 

code/components/jomjol_wlan/connect_wlan.cpp

@@ -13,8 +13,6 @@
 
 #include "lwip/err.h"
 #include "lwip/sys.h"
-#include "lwip/ip_addr.h"
-#include "lwip/inet.h"
 
 #include <fstream>
 #include <string>
@@ -38,14 +36,10 @@ static EventGroupHandle_t s_wifi_event_group;
 #define WIFI_FAIL_BIT      BIT1
 
 static const char *TAG = "wifi station";
-static esp_netif_t *my_sta;
 
 static int s_retry_num = 0;
 
 ///////////////////////////////////////////////////////////
-#ifdef BLINK_GPIO
-#undef BLINK_GPIO
-#endif
 #define BLINK_GPIO GPIO_NUM_33
 
 int BlinkDauer;
@@ -81,11 +75,7 @@ void task_doBlink(void *pvParameter)
     BlinkIsRunning = true;
 
 	// Init the GPIO
-#if (ESP_IDF_VERSION >= ESP_IDF_VERSION_VAL(5, 0, 0))
-    esp_rom_gpio_pad_select_gpio(BLINK_GPIO);
-#else
     gpio_pad_select_gpio(BLINK_GPIO);
-#endif
     /* Set the GPIO as a push/pull output */
     gpio_set_direction(BLINK_GPIO, GPIO_MODE_OUTPUT);  
 
@@ -137,9 +127,7 @@ static void event_handler(void* arg, esp_event_base_t event_base,
     } else if (event_base == IP_EVENT && event_id == IP_EVENT_STA_GOT_IP) {
         ip_event_got_ip_t* event = (ip_event_got_ip_t*) event_data;
         ESP_LOGI(TAG, "got ip:" IPSTR, IP2STR(&event->ip_info.ip));
-	char ip_addr[16];
-	inet_ntoa_r(event->ip_info.ip.addr, ip_addr, 16);
-        ipadress = std::string(ip_addr);
+        ipadress = std::string(ip4addr_ntoa((const ip4_addr*) &event->ip_info.ip));
         s_retry_num = 0;
         xEventGroupSetBits(s_wifi_event_group, WIFI_CONNECTED_BIT);
         LEDBlinkTask(1000, 5, true);
@@ -161,7 +149,7 @@ void wifi_init_sta(const char *_ssid, const char *_password, const char *_hostna
     ESP_ERROR_CHECK(esp_netif_init());
 
     ESP_ERROR_CHECK(esp_event_loop_create_default());
-    my_sta = esp_netif_create_default_wifi_sta();
+    esp_netif_t *my_sta = esp_netif_create_default_wifi_sta();
 
     if ((_ipadr != NULL) && (_gw != NULL) && (_netmask != NULL))
     {
@@ -237,7 +225,7 @@ void wifi_init_sta(const char *_ssid, const char *_password, const char *_hostna
 
     if (_hostname != NULL)
     {
-	esp_err_t ret = esp_netif_set_hostname(my_sta, _hostname);
+        esp_err_t ret = tcpip_adapter_set_hostname(TCPIP_ADAPTER_IF_STA , _hostname);
         hostname = std::string(_hostname);
         if(ret != ESP_OK ){
             ESP_LOGE(TAG,"failed to set hostname:%d",ret);  

code/main/main.cpp

@@ -46,9 +46,6 @@ extern const char* BUILD_TIME;
 #include "server_GPIO.h"
 
 
-#ifdef BLINK_GPIO
-#undef BLINK_GPIO
-#endif
 #define BLINK_GPIO GPIO_NUM_33
 
 static const char *TAGMAIN = "main";
@@ -91,10 +88,11 @@ bool Init_NVS_SDCard()
     // Options for mounting the filesystem.
     // If format_if_mount_failed is set to true, SD card will be partitioned and
     // formatted in case when mounting fails.
-    esp_vfs_fat_sdmmc_mount_config_t mount_config;
-    mount_config.format_if_mount_failed = false;
-    mount_config.max_files = 7;                         // anstatt 5 (2022-09-21)
-    mount_config.allocation_unit_size = 16 * 1024;
+    esp_vfs_fat_sdmmc_mount_config_t mount_config = {
+        .format_if_mount_failed = false,
+        .max_files = 7,                         // anstatt 5 (2022-09-21)
+        .allocation_unit_size = 16 * 1024
+    };
 
     // Use settings defined above to initialize SD card and mount FAT filesystem.
     // Note: esp_vfs_fat_sdmmc_mount is an all-in-one convenience function.
@@ -197,7 +195,7 @@ extern "C" void app_main(void)
         ESP_LOGD(TAGMAIN, "No SSID and PASSWORD set!!!");
 
     if (hostname != NULL)
-        ESP_LOGD(TAGMAIN, "Hostname: %s", hostname);
+        ESP_LOGD(TAGMAIN, "Hostename: %s", hostname);
     else
         ESP_LOGD(TAGMAIN, "Hostname not set");
 

code/main/server_main.cpp

@@ -12,7 +12,6 @@
 #include "version.h"
 
 #include "esp_wifi.h"
-#include "lwip/inet.h"
 
 #include "server_tflite.h"
 #include "esp_log.h"
@@ -360,25 +359,12 @@ esp_err_t sysinfo_handler(httpd_req_t *req)
     std::string gitrevision = libfive_git_revision();
     std::string htmlversion = getHTMLversion();
     char freeheapmem[11];
-#if (ESP_IDF_VERSION >= ESP_IDF_VERSION_VAL(5, 0, 0))
-    sprintf(freeheapmem, "%lu", esp_get_free_heap_size());
-#else
     sprintf(freeheapmem, "%zu", esp_get_free_heap_size());
-#endif
     
-    char ipstr[INET_ADDRSTRLEN];
+    tcpip_adapter_ip_info_t ip_info;
+    ESP_ERROR_CHECK(tcpip_adapter_get_ip_info(TCPIP_ADAPTER_IF_STA, &ip_info));
     const char *hostname;
-    esp_netif_t *esp_netif = esp_netif_get_handle_from_ifkey("WIFI_STA_DEF");
-    if (esp_netif != NULL) {
-	esp_netif_ip_info_t ip_info;
-	ESP_ERROR_CHECK(esp_netif_get_ip_info(esp_netif, &ip_info));
-	esp_ip4addr_ntoa(&ip_info.ip, ipstr, INET_ADDRSTRLEN);
-
-	ESP_ERROR_CHECK(esp_netif_get_hostname(esp_netif, &hostname));
-    } else {
-	ipstr[0] = '\0';
-	hostname = "n/a";
-    }
+    ESP_ERROR_CHECK(tcpip_adapter_get_hostname(TCPIP_ADAPTER_IF_STA, &hostname));
     
     zw = "[\
             {\
@@ -390,7 +376,7 @@ esp_err_t sysinfo_handler(httpd_req_t *req)
                 \"html\" : \"" + htmlversion + "\",\
                 \"cputemp\" : \"" + cputemp + "\",\
                 \"hostname\" : \"" + hostname + "\",\
-                \"IPv4\" : \"" + ipstr + "\",\
+                \"IPv4\" : \"" + ip4addr_ntoa(&ip_info.ip) + "\",\
                 \"freeHeapMem\" : \"" + freeheapmem + "\"\
             }\
         ]";

code/main/server_main.h

@@ -9,6 +9,7 @@
 #include <sys/param.h>
 #include "nvs_flash.h"
 #include "esp_netif.h"
+#include "esp_eth.h"
 #include "server_GPIO.h"
 
 #include <esp_http_server.h>

code/sdkconfig.defaults

@@ -1,1548 +1,66 @@
-#
-# Automatically generated file. DO NOT EDIT.
-# Espressif IoT Development Framework (ESP-IDF) Project Configuration
-#
-CONFIG_IDF_CMAKE=y
-CONFIG_IDF_TARGET_ARCH_XTENSA=y
-CONFIG_IDF_TARGET="esp32"
-CONFIG_IDF_TARGET_ESP32=y
-CONFIG_IDF_FIRMWARE_CHIP_ID=0x0000
-
-#
-# SDK tool configuration
-#
-CONFIG_SDK_TOOLPREFIX="xtensa-esp32-elf-"
-# CONFIG_SDK_TOOLCHAIN_SUPPORTS_TIME_WIDE_64_BITS is not set
-# end of SDK tool configuration
-
-#
-# Build type
-#
-CONFIG_APP_BUILD_TYPE_APP_2NDBOOT=y
-# CONFIG_APP_BUILD_TYPE_ELF_RAM is not set
-CONFIG_APP_BUILD_GENERATE_BINARIES=y
-CONFIG_APP_BUILD_BOOTLOADER=y
-CONFIG_APP_BUILD_USE_FLASH_SECTIONS=y
-# end of Build type
-
-#
-# Application manager
-#
-CONFIG_APP_COMPILE_TIME_DATE=y
-# CONFIG_APP_EXCLUDE_PROJECT_VER_VAR is not set
-# CONFIG_APP_EXCLUDE_PROJECT_NAME_VAR is not set
-# CONFIG_APP_PROJECT_VER_FROM_CONFIG is not set
-CONFIG_APP_RETRIEVE_LEN_ELF_SHA=16
-# end of Application manager
+##################################################
+# Application specific configuration
+# Edit this file instead of sdkconfig.esp32cam!
+# After editting, make sure to explicitly delete 
+# sdkconfig.esp32cam to apply your changes!
+##################################################
+
+CONFIG_COMPILER_OPTIMIZATION_DEFAULT=n
+CONFIG_COMPILER_OPTIMIZATION_SIZE=y
 
-#
-# Bootloader config
-#
-CONFIG_BOOTLOADER_OFFSET_IN_FLASH=0x1000
-CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_SIZE=y
-# CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_DEBUG is not set
-# CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_PERF is not set
-# CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_NONE is not set
-# CONFIG_BOOTLOADER_LOG_LEVEL_NONE is not set
-# CONFIG_BOOTLOADER_LOG_LEVEL_ERROR is not set
-# CONFIG_BOOTLOADER_LOG_LEVEL_WARN is not set
-CONFIG_BOOTLOADER_LOG_LEVEL_INFO=y
-# CONFIG_BOOTLOADER_LOG_LEVEL_DEBUG is not set
-# CONFIG_BOOTLOADER_LOG_LEVEL_VERBOSE is not set
-CONFIG_BOOTLOADER_LOG_LEVEL=3
-# CONFIG_BOOTLOADER_VDDSDIO_BOOST_1_8V is not set
-CONFIG_BOOTLOADER_VDDSDIO_BOOST_1_9V=y
-# CONFIG_BOOTLOADER_FACTORY_RESET is not set
-# CONFIG_BOOTLOADER_APP_TEST is not set
-CONFIG_BOOTLOADER_REGION_PROTECTION_ENABLE=y
-CONFIG_BOOTLOADER_WDT_ENABLE=y
-# CONFIG_BOOTLOADER_WDT_DISABLE_IN_USER_CODE is not set
-CONFIG_BOOTLOADER_WDT_TIME_MS=9000
-# CONFIG_BOOTLOADER_APP_ROLLBACK_ENABLE is not set
-# CONFIG_BOOTLOADER_SKIP_VALIDATE_IN_DEEP_SLEEP is not set
-# CONFIG_BOOTLOADER_SKIP_VALIDATE_ON_POWER_ON is not set
-# CONFIG_BOOTLOADER_SKIP_VALIDATE_ALWAYS is not set
-CONFIG_BOOTLOADER_RESERVE_RTC_SIZE=0
-# CONFIG_BOOTLOADER_CUSTOM_RESERVE_RTC is not set
-CONFIG_BOOTLOADER_FLASH_XMC_SUPPORT=y
-# end of Bootloader config
+CONFIG_ESP32_REV_MIN_0=y
 
-#
-# Security features
-#
-# CONFIG_SECURE_SIGNED_APPS_NO_SECURE_BOOT is not set
-# CONFIG_SECURE_BOOT is not set
-# CONFIG_SECURE_FLASH_ENC_ENABLED is not set
-# end of Security features
+CONFIG_ESP32_DPORT_WORKAROUND=y
 
-#
-# Serial flasher config
-#
-CONFIG_ESPTOOLPY_BAUD_OTHER_VAL=115200
-# CONFIG_ESPTOOLPY_NO_STUB is not set
-# CONFIG_ESPTOOLPY_FLASHMODE_QIO is not set
-# CONFIG_ESPTOOLPY_FLASHMODE_QOUT is not set
-CONFIG_ESPTOOLPY_FLASHMODE_DIO=y
-# CONFIG_ESPTOOLPY_FLASHMODE_DOUT is not set
-CONFIG_ESPTOOLPY_FLASH_SAMPLE_MODE_STR=y
-CONFIG_ESPTOOLPY_FLASHMODE="dio"
-# CONFIG_ESPTOOLPY_FLASHFREQ_80M is not set
-CONFIG_ESPTOOLPY_FLASHFREQ_40M=y
-# CONFIG_ESPTOOLPY_FLASHFREQ_26M is not set
-# CONFIG_ESPTOOLPY_FLASHFREQ_20M is not set
-CONFIG_ESPTOOLPY_FLASHFREQ="40m"
-# CONFIG_ESPTOOLPY_FLASHSIZE_1MB is not set
-# CONFIG_ESPTOOLPY_FLASHSIZE_2MB is not set
 CONFIG_ESPTOOLPY_FLASHSIZE_4MB=y
-# CONFIG_ESPTOOLPY_FLASHSIZE_8MB is not set
-# CONFIG_ESPTOOLPY_FLASHSIZE_16MB is not set
-# CONFIG_ESPTOOLPY_FLASHSIZE_32MB is not set
-# CONFIG_ESPTOOLPY_FLASHSIZE_64MB is not set
-# CONFIG_ESPTOOLPY_FLASHSIZE_128MB is not set
 CONFIG_ESPTOOLPY_FLASHSIZE="4MB"
 CONFIG_ESPTOOLPY_FLASHSIZE_DETECT=y
-CONFIG_ESPTOOLPY_BEFORE_RESET=y
-# CONFIG_ESPTOOLPY_BEFORE_NORESET is not set
-CONFIG_ESPTOOLPY_BEFORE="default_reset"
-CONFIG_ESPTOOLPY_AFTER_RESET=y
-# CONFIG_ESPTOOLPY_AFTER_NORESET is not set
-CONFIG_ESPTOOLPY_AFTER="hard_reset"
-# CONFIG_ESPTOOLPY_MONITOR_BAUD_CONSOLE is not set
-# CONFIG_ESPTOOLPY_MONITOR_BAUD_9600B is not set
-# CONFIG_ESPTOOLPY_MONITOR_BAUD_57600B is not set
-CONFIG_ESPTOOLPY_MONITOR_BAUD_115200B=y
-# CONFIG_ESPTOOLPY_MONITOR_BAUD_230400B is not set
-# CONFIG_ESPTOOLPY_MONITOR_BAUD_921600B is not set
-# CONFIG_ESPTOOLPY_MONITOR_BAUD_2MB is not set
-# CONFIG_ESPTOOLPY_MONITOR_BAUD_OTHER is not set
-CONFIG_ESPTOOLPY_MONITOR_BAUD_OTHER_VAL=115200
-CONFIG_ESPTOOLPY_MONITOR_BAUD=115200
-# end of Serial flasher config
 
-#
-# Partition Table
-#
-# CONFIG_PARTITION_TABLE_SINGLE_APP is not set
-# CONFIG_PARTITION_TABLE_SINGLE_APP_LARGE is not set
-# CONFIG_PARTITION_TABLE_TWO_OTA is not set
 CONFIG_PARTITION_TABLE_CUSTOM=y
 CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions.csv"
 CONFIG_PARTITION_TABLE_FILENAME="partitions.csv"
 CONFIG_PARTITION_TABLE_OFFSET=0x8000
 CONFIG_PARTITION_TABLE_MD5=y
-# end of Partition Table
-
-#
-# Example Connection Configuration
-#
-CONFIG_EXAMPLE_GPIO_RANGE_MIN=0
-CONFIG_EXAMPLE_GPIO_RANGE_MAX=33
-CONFIG_EXAMPLE_CONNECT_WIFI=y
-CONFIG_EXAMPLE_WIFI_SSID="myssid"
-CONFIG_EXAMPLE_WIFI_PASSWORD="mypassword"
-# CONFIG_EXAMPLE_WIFI_SCAN_METHOD_FAST is not set
-CONFIG_EXAMPLE_WIFI_SCAN_METHOD_ALL_CHANNEL=y
-
-#
-# WiFi Scan threshold
-#
-CONFIG_EXAMPLE_WIFI_SCAN_RSSI_THRESHOLD=-127
-CONFIG_EXAMPLE_WIFI_AUTH_OPEN=y
-# CONFIG_EXAMPLE_WIFI_AUTH_WEP is not set
-# CONFIG_EXAMPLE_WIFI_AUTH_WPA_PSK is not set
-# CONFIG_EXAMPLE_WIFI_AUTH_WPA2_PSK is not set
-# CONFIG_EXAMPLE_WIFI_AUTH_WPA_WPA2_PSK is not set
-# CONFIG_EXAMPLE_WIFI_AUTH_WPA2_ENTERPRISE is not set
-# CONFIG_EXAMPLE_WIFI_AUTH_WPA3_PSK is not set
-# CONFIG_EXAMPLE_WIFI_AUTH_WPA2_WPA3_PSK is not set
-# CONFIG_EXAMPLE_WIFI_AUTH_WAPI_PSK is not set
-# end of WiFi Scan threshold
-
-CONFIG_EXAMPLE_WIFI_CONNECT_AP_BY_SIGNAL=y
-# CONFIG_EXAMPLE_WIFI_CONNECT_AP_BY_SECURITY is not set
-# CONFIG_EXAMPLE_CONNECT_ETHERNET is not set
-CONFIG_EXAMPLE_CONNECT_IPV6=y
-CONFIG_EXAMPLE_CONNECT_IPV6_PREF_LOCAL_LINK=y
-# CONFIG_EXAMPLE_CONNECT_IPV6_PREF_GLOBAL is not set
-# CONFIG_EXAMPLE_CONNECT_IPV6_PREF_SITE_LOCAL is not set
-# CONFIG_EXAMPLE_CONNECT_IPV6_PREF_UNIQUE_LOCAL is not set
-# end of Example Connection Configuration
-
-#
-# ESP-NN
-#
-# CONFIG_NN_ANSI_C is not set
-CONFIG_NN_OPTIMIZED=y
-CONFIG_NN_OPTIMIZATIONS=1
-# end of ESP-NN
-
-#
-# Compiler options
-#
-# CONFIG_COMPILER_OPTIMIZATION_DEFAULT is not set
-CONFIG_COMPILER_OPTIMIZATION_SIZE=y
-# CONFIG_COMPILER_OPTIMIZATION_PERF is not set
-# CONFIG_COMPILER_OPTIMIZATION_NONE is not set
-CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_ENABLE=y
-# CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_SILENT is not set
-# CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_DISABLE is not set
-CONFIG_COMPILER_OPTIMIZATION_ASSERTION_LEVEL=2
-# CONFIG_COMPILER_OPTIMIZATION_CHECKS_SILENT is not set
-CONFIG_COMPILER_HIDE_PATHS_MACROS=y
-# CONFIG_COMPILER_CXX_EXCEPTIONS is not set
-# CONFIG_COMPILER_CXX_RTTI is not set
-CONFIG_COMPILER_STACK_CHECK_MODE_NONE=y
-# CONFIG_COMPILER_STACK_CHECK_MODE_NORM is not set
-# CONFIG_COMPILER_STACK_CHECK_MODE_STRONG is not set
-# CONFIG_COMPILER_STACK_CHECK_MODE_ALL is not set
-# CONFIG_COMPILER_WARN_WRITE_STRINGS is not set
-# CONFIG_COMPILER_DISABLE_GCC8_WARNINGS is not set
-# CONFIG_COMPILER_DUMP_RTL_FILES is not set
-# end of Compiler options
-
-#
-# Component config
-#
-
-#
-# Application Level Tracing
-#
-# CONFIG_APPTRACE_DEST_JTAG is not set
-CONFIG_APPTRACE_DEST_NONE=y
-CONFIG_APPTRACE_LOCK_ENABLE=y
-# end of Application Level Tracing
-
-#
-# ESP-ASIO
-#
-# CONFIG_ASIO_SSL_SUPPORT is not set
-# end of ESP-ASIO
 
-#
-# Bluetooth
-#
-# CONFIG_BT_ENABLED is not set
-# end of Bluetooth
-
-#
-# CoAP Configuration
-#
-CONFIG_COAP_MBEDTLS_PSK=y
-# CONFIG_COAP_MBEDTLS_PKI is not set
-# CONFIG_COAP_MBEDTLS_DEBUG is not set
-CONFIG_COAP_LOG_DEFAULT_LEVEL=0
-# end of CoAP Configuration
-
-#
-# Driver configurations
-#
-
-#
-# ADC configuration
-#
-# CONFIG_ADC_FORCE_XPD_FSM is not set
-CONFIG_ADC_DISABLE_DAC=y
-# end of ADC configuration
-
-#
-# MCPWM configuration
-#
-# CONFIG_MCPWM_ISR_IN_IRAM is not set
-# end of MCPWM configuration
-
-#
-# SPI configuration
-#
-# CONFIG_SPI_MASTER_IN_IRAM is not set
-CONFIG_SPI_MASTER_ISR_IN_IRAM=y
-# CONFIG_SPI_SLAVE_IN_IRAM is not set
-CONFIG_SPI_SLAVE_ISR_IN_IRAM=y
-# end of SPI configuration
-
-#
-# TWAI configuration
-#
-# CONFIG_TWAI_ISR_IN_IRAM is not set
-# CONFIG_TWAI_ERRATA_FIX_BUS_OFF_REC is not set
-# CONFIG_TWAI_ERRATA_FIX_TX_INTR_LOST is not set
-# CONFIG_TWAI_ERRATA_FIX_RX_FRAME_INVALID is not set
-# CONFIG_TWAI_ERRATA_FIX_RX_FIFO_CORRUPT is not set
-# end of TWAI configuration
-
-#
-# UART configuration
-#
-# CONFIG_UART_ISR_IN_IRAM is not set
-# end of UART configuration
-
-#
-# RTCIO configuration
-#
-# CONFIG_RTCIO_SUPPORT_RTC_GPIO_DESC is not set
-# end of RTCIO configuration
-
-#
-# GPIO Configuration
-#
-# CONFIG_GPIO_ESP32_SUPPORT_SWITCH_SLP_PULL is not set
-# end of GPIO Configuration
-
-#
-# GDMA Configuration
-#
-# CONFIG_GDMA_CTRL_FUNC_IN_IRAM is not set
-# CONFIG_GDMA_ISR_IRAM_SAFE is not set
-# end of GDMA Configuration
-# end of Driver configurations
-
-#
-# eFuse Bit Manager
-#
-# CONFIG_EFUSE_CUSTOM_TABLE is not set
-# CONFIG_EFUSE_VIRTUAL is not set
-# CONFIG_EFUSE_CODE_SCHEME_COMPAT_NONE is not set
-CONFIG_EFUSE_CODE_SCHEME_COMPAT_3_4=y
-# CONFIG_EFUSE_CODE_SCHEME_COMPAT_REPEAT is not set
-CONFIG_EFUSE_MAX_BLK_LEN=192
-# end of eFuse Bit Manager
-
-#
-# ESP-TLS
-#
-CONFIG_ESP_TLS_USING_MBEDTLS=y
-# CONFIG_ESP_TLS_USE_SECURE_ELEMENT is not set
-# CONFIG_ESP_TLS_CLIENT_SESSION_TICKETS is not set
-# CONFIG_ESP_TLS_SERVER is not set
-# CONFIG_ESP_TLS_PSK_VERIFICATION is not set
-# CONFIG_ESP_TLS_INSECURE is not set
-# end of ESP-TLS
-
-#
-# ESP32-specific
-#
-CONFIG_ESP32_ECO3_CACHE_LOCK_FIX=y
-CONFIG_ESP32_REV_MIN_0=y
-# CONFIG_ESP32_REV_MIN_1 is not set
-# CONFIG_ESP32_REV_MIN_2 is not set
-# CONFIG_ESP32_REV_MIN_3 is not set
-CONFIG_ESP32_REV_MIN=0
-CONFIG_ESP32_DPORT_WORKAROUND=y
-# CONFIG_ESP32_DEFAULT_CPU_FREQ_80 is not set
-CONFIG_ESP32_DEFAULT_CPU_FREQ_160=y
-# CONFIG_ESP32_DEFAULT_CPU_FREQ_240 is not set
-CONFIG_ESP32_DEFAULT_CPU_FREQ_MHZ=160
 CONFIG_ESP32_SPIRAM_SUPPORT=y
 
-#
-# SPI RAM config
-#
-CONFIG_SPIRAM_TYPE_AUTO=y
-# CONFIG_SPIRAM_TYPE_ESPPSRAM16 is not set
-# CONFIG_SPIRAM_TYPE_ESPPSRAM32 is not set
-# CONFIG_SPIRAM_TYPE_ESPPSRAM64 is not set
 CONFIG_SPIRAM_SIZE=-1
 CONFIG_SPIRAM_SPEED_40M=y
 CONFIG_SPIRAM=y
 CONFIG_SPIRAM_BOOT_INIT=y
-# CONFIG_SPIRAM_IGNORE_NOTFOUND is not set
-# CONFIG_SPIRAM_USE_MEMMAP is not set
-# CONFIG_SPIRAM_USE_CAPS_ALLOC is not set
 CONFIG_SPIRAM_USE_MALLOC=y
 CONFIG_SPIRAM_MEMTEST=y
 CONFIG_SPIRAM_MALLOC_ALWAYSINTERNAL=16384
-# CONFIG_SPIRAM_TRY_ALLOCATE_WIFI_LWIP is not set
 CONFIG_SPIRAM_MALLOC_RESERVE_INTERNAL=32768
-# CONFIG_SPIRAM_ALLOW_BSS_SEG_EXTERNAL_MEMORY is not set
-# CONFIG_SPIRAM_ALLOW_NOINIT_SEG_EXTERNAL_MEMORY is not set
 CONFIG_SPIRAM_CACHE_WORKAROUND=y
 
-#
-# SPIRAM cache workaround debugging
-#
-CONFIG_SPIRAM_CACHE_WORKAROUND_STRATEGY_MEMW=y
-# CONFIG_SPIRAM_CACHE_WORKAROUND_STRATEGY_DUPLDST is not set
-# CONFIG_SPIRAM_CACHE_WORKAROUND_STRATEGY_NOPS is not set
-# end of SPIRAM cache workaround debugging
-
-#
-# SPIRAM workaround libraries placement
-#
-CONFIG_SPIRAM_CACHE_LIBJMP_IN_IRAM=y
-CONFIG_SPIRAM_CACHE_LIBMATH_IN_IRAM=y
-CONFIG_SPIRAM_CACHE_LIBNUMPARSER_IN_IRAM=y
-CONFIG_SPIRAM_CACHE_LIBIO_IN_IRAM=y
-CONFIG_SPIRAM_CACHE_LIBTIME_IN_IRAM=y
-CONFIG_SPIRAM_CACHE_LIBCHAR_IN_IRAM=y
-CONFIG_SPIRAM_CACHE_LIBMEM_IN_IRAM=y
-CONFIG_SPIRAM_CACHE_LIBSTR_IN_IRAM=y
-CONFIG_SPIRAM_CACHE_LIBRAND_IN_IRAM=y
-CONFIG_SPIRAM_CACHE_LIBENV_IN_IRAM=y
-CONFIG_SPIRAM_CACHE_LIBFILE_IN_IRAM=y
-CONFIG_SPIRAM_CACHE_LIBMISC_IN_IRAM=y
-# end of SPIRAM workaround libraries placement
-
-CONFIG_SPIRAM_BANKSWITCH_ENABLE=y
-CONFIG_SPIRAM_BANKSWITCH_RESERVE=8
-# CONFIG_SPIRAM_ALLOW_STACK_EXTERNAL_MEMORY is not set
-
-#
-# PSRAM clock and cs IO for ESP32-DOWD
-#
-CONFIG_D0WD_PSRAM_CLK_IO=17
-CONFIG_D0WD_PSRAM_CS_IO=16
-# end of PSRAM clock and cs IO for ESP32-DOWD
-
-#
-# PSRAM clock and cs IO for ESP32-D2WD
-#
-CONFIG_D2WD_PSRAM_CLK_IO=9
-CONFIG_D2WD_PSRAM_CS_IO=10
-# end of PSRAM clock and cs IO for ESP32-D2WD
-
-#
-# PSRAM clock and cs IO for ESP32-PICO
-#
-CONFIG_PICO_PSRAM_CS_IO=10
-# end of PSRAM clock and cs IO for ESP32-PICO
-
-# CONFIG_SPIRAM_CUSTOM_SPIWP_SD3_PIN is not set
-CONFIG_SPIRAM_SPIWP_SD3_PIN=7
-# CONFIG_SPIRAM_2T_MODE is not set
-# end of SPI RAM config
-
-# CONFIG_ESP32_TRAX is not set
-CONFIG_ESP32_TRACEMEM_RESERVE_DRAM=0x0
-# CONFIG_ESP32_ULP_COPROC_ENABLED is not set
-CONFIG_ESP32_ULP_COPROC_RESERVE_MEM=0
-CONFIG_ESP32_DEBUG_OCDAWARE=y
-CONFIG_ESP32_BROWNOUT_DET=y
-CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_0=y
-# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_1 is not set
-# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_2 is not set
-# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_3 is not set
-# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_4 is not set
-# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_5 is not set
-# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_6 is not set
-# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_7 is not set
-CONFIG_ESP32_BROWNOUT_DET_LVL=0
-CONFIG_ESP32_TIME_SYSCALL_USE_RTC_FRC1=y
-# CONFIG_ESP32_TIME_SYSCALL_USE_RTC is not set
-# CONFIG_ESP32_TIME_SYSCALL_USE_FRC1 is not set
-# CONFIG_ESP32_TIME_SYSCALL_USE_NONE is not set
-CONFIG_ESP32_RTC_CLK_SRC_INT_RC=y
-# CONFIG_ESP32_RTC_CLK_SRC_EXT_CRYS is not set
-# CONFIG_ESP32_RTC_CLK_SRC_EXT_OSC is not set
-# CONFIG_ESP32_RTC_CLK_SRC_INT_8MD256 is not set
-CONFIG_ESP32_RTC_CLK_CAL_CYCLES=1024
-CONFIG_ESP32_DEEP_SLEEP_WAKEUP_DELAY=2000
-CONFIG_ESP32_XTAL_FREQ_40=y
-# CONFIG_ESP32_XTAL_FREQ_26 is not set
-# CONFIG_ESP32_XTAL_FREQ_AUTO is not set
-CONFIG_ESP32_XTAL_FREQ=40
-# CONFIG_ESP32_DISABLE_BASIC_ROM_CONSOLE is not set
-# CONFIG_ESP32_NO_BLOBS is not set
-# CONFIG_ESP32_COMPATIBLE_PRE_V2_1_BOOTLOADERS is not set
-# CONFIG_ESP32_COMPATIBLE_PRE_V3_1_BOOTLOADERS is not set
-# CONFIG_ESP32_USE_FIXED_STATIC_RAM_SIZE is not set
-CONFIG_ESP32_DPORT_DIS_INTERRUPT_LVL=5
-# end of ESP32-specific
-
-#
-# ADC-Calibration
-#
-CONFIG_ADC_CAL_EFUSE_TP_ENABLE=y
-CONFIG_ADC_CAL_EFUSE_VREF_ENABLE=y
-CONFIG_ADC_CAL_LUT_ENABLE=y
-# end of ADC-Calibration
-
-#
-# Common ESP-related
-#
-CONFIG_ESP_ERR_TO_NAME_LOOKUP=y
-# end of Common ESP-related
-
-#
-# Ethernet
-#
-CONFIG_ETH_ENABLED=y
-CONFIG_ETH_USE_ESP32_EMAC=y
-CONFIG_ETH_PHY_INTERFACE_RMII=y
-CONFIG_ETH_RMII_CLK_INPUT=y
-# CONFIG_ETH_RMII_CLK_OUTPUT is not set
-CONFIG_ETH_RMII_CLK_IN_GPIO=0
-CONFIG_ETH_DMA_BUFFER_SIZE=512
-CONFIG_ETH_DMA_RX_BUFFER_NUM=10
-CONFIG_ETH_DMA_TX_BUFFER_NUM=10
-CONFIG_ETH_USE_SPI_ETHERNET=y
-# CONFIG_ETH_SPI_ETHERNET_DM9051 is not set
-# CONFIG_ETH_SPI_ETHERNET_W5500 is not set
-# CONFIG_ETH_SPI_ETHERNET_KSZ8851SNL is not set
-# CONFIG_ETH_USE_OPENETH is not set
-# end of Ethernet
-
-#
-# Event Loop Library
-#
-# CONFIG_ESP_EVENT_LOOP_PROFILING is not set
-CONFIG_ESP_EVENT_POST_FROM_ISR=y
-CONFIG_ESP_EVENT_POST_FROM_IRAM_ISR=y
-# end of Event Loop Library
-
-#
-# GDB Stub
-#
-# end of GDB Stub
-
-#
-# ESP HTTP client
-#
-CONFIG_ESP_HTTP_CLIENT_ENABLE_HTTPS=y
-# CONFIG_ESP_HTTP_CLIENT_ENABLE_BASIC_AUTH is not set
-CONFIG_ESP_HTTP_CLIENT_ENABLE_DIGEST_AUTH=y
-# end of ESP HTTP client
+CONFIG_ESP_INT_WDT_TIMEOUT_MS=300
 
-#
-# HTTP Server
-#
 CONFIG_HTTPD_MAX_REQ_HDR_LEN=1024
-CONFIG_HTTPD_MAX_URI_LEN=512
-CONFIG_HTTPD_ERR_RESP_NO_DELAY=y
-CONFIG_HTTPD_PURGE_BUF_LEN=16
-# CONFIG_HTTPD_LOG_PURGE_DATA is not set
-# CONFIG_HTTPD_WS_SUPPORT is not set
-# end of HTTP Server
-
-#
-# ESP HTTPS OTA
-#
-# CONFIG_OTA_ALLOW_HTTP is not set
-# end of ESP HTTPS OTA
-
-#
-# ESP HTTPS server
-#
-# CONFIG_ESP_HTTPS_SERVER_ENABLE is not set
-# end of ESP HTTPS server
-
-#
-# Hardware Settings
-#
-
-#
-# MAC Config
-#
-CONFIG_ESP_MAC_ADDR_UNIVERSE_WIFI_STA=y
-CONFIG_ESP_MAC_ADDR_UNIVERSE_WIFI_AP=y
-CONFIG_ESP_MAC_ADDR_UNIVERSE_BT=y
-CONFIG_ESP_MAC_ADDR_UNIVERSE_ETH=y
-# CONFIG_ESP32_UNIVERSAL_MAC_ADDRESSES_TWO is not set
-CONFIG_ESP32_UNIVERSAL_MAC_ADDRESSES_FOUR=y
-CONFIG_ESP32_UNIVERSAL_MAC_ADDRESSES=4
-# end of MAC Config
-
-#
-# Sleep Config
-#
-CONFIG_ESP_SLEEP_RTC_BUS_ISO_WORKAROUND=y
-# CONFIG_ESP_SLEEP_GPIO_RESET_WORKAROUND is not set
-# CONFIG_ESP_SLEEP_PSRAM_LEAKAGE_WORKAROUND is not set
-# CONFIG_ESP_SLEEP_FLASH_LEAKAGE_WORKAROUND is not set
-# end of Sleep Config
-
-#
-# RTC Clock Config
-#
-# end of RTC Clock Config
-# end of Hardware Settings
-
-#
-# IPC (Inter-Processor Call)
-#
-CONFIG_ESP_IPC_TASK_STACK_SIZE=1536
-CONFIG_ESP_IPC_USES_CALLERS_PRIORITY=y
-CONFIG_ESP_IPC_ISR_ENABLE=y
-# end of IPC (Inter-Processor Call)
-
-#
-# LCD and Touch Panel
-#
-
-#
-# LCD Peripheral Configuration
-#
-CONFIG_LCD_PANEL_IO_FORMAT_BUF_SIZE=32
-# end of LCD Peripheral Configuration
-# end of LCD and Touch Panel
-
-#
-# ESP NETIF Adapter
-#
-CONFIG_ESP_NETIF_IP_LOST_TIMER_INTERVAL=120
-CONFIG_ESP_NETIF_TCPIP_LWIP=y
-# CONFIG_ESP_NETIF_LOOPBACK is not set
-CONFIG_ESP_NETIF_TCPIP_ADAPTER_COMPATIBLE_LAYER=y
-# end of ESP NETIF Adapter
-
-#
-# PHY
-#
-CONFIG_ESP_PHY_CALIBRATION_AND_DATA_STORAGE=y
-# CONFIG_ESP_PHY_INIT_DATA_IN_PARTITION is not set
-CONFIG_ESP_PHY_MAX_WIFI_TX_POWER=20
-CONFIG_ESP_PHY_MAX_TX_POWER=20
-CONFIG_ESP_PHY_REDUCE_TX_POWER=y
-# end of PHY
-
-#
-# Power Management
-#
-# CONFIG_PM_ENABLE is not set
-# end of Power Management
-
-#
-# ESP System Settings
-#
-# CONFIG_ESP_SYSTEM_PANIC_PRINT_HALT is not set
-CONFIG_ESP_SYSTEM_PANIC_PRINT_REBOOT=y
-# CONFIG_ESP_SYSTEM_PANIC_SILENT_REBOOT is not set
-# CONFIG_ESP_SYSTEM_PANIC_GDBSTUB is not set
-# CONFIG_ESP_SYSTEM_GDBSTUB_RUNTIME is not set
-
-#
-# Memory protection
-#
-# end of Memory protection
 
-CONFIG_ESP_SYSTEM_EVENT_QUEUE_SIZE=32
-CONFIG_ESP_SYSTEM_EVENT_TASK_STACK_SIZE=2304
-CONFIG_ESP_MAIN_TASK_STACK_SIZE=3584
-CONFIG_ESP_MAIN_TASK_AFFINITY_CPU0=y
-# CONFIG_ESP_MAIN_TASK_AFFINITY_CPU1 is not set
-# CONFIG_ESP_MAIN_TASK_AFFINITY_NO_AFFINITY is not set
-CONFIG_ESP_MAIN_TASK_AFFINITY=0x0
-CONFIG_ESP_MINIMAL_SHARED_STACK_SIZE=2048
-CONFIG_ESP_CONSOLE_UART_DEFAULT=y
-# CONFIG_ESP_CONSOLE_UART_CUSTOM is not set
-# CONFIG_ESP_CONSOLE_NONE is not set
-CONFIG_ESP_CONSOLE_UART=y
-CONFIG_ESP_CONSOLE_MULTIPLE_UART=y
-CONFIG_ESP_CONSOLE_UART_NUM=0
-CONFIG_ESP_CONSOLE_UART_BAUDRATE=115200
-CONFIG_ESP_INT_WDT=y
-CONFIG_ESP_INT_WDT_TIMEOUT_MS=300
-CONFIG_ESP_INT_WDT_CHECK_CPU1=y
-CONFIG_ESP_TASK_WDT=y
-# CONFIG_ESP_TASK_WDT_PANIC is not set
-CONFIG_ESP_TASK_WDT_TIMEOUT_S=5
-CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU0=y
-CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU1=y
-# CONFIG_ESP_PANIC_HANDLER_IRAM is not set
-# CONFIG_ESP_DEBUG_STUBS_ENABLE is not set
-# CONFIG_ESP_SYSTEM_CHECK_INT_LEVEL_5 is not set
-CONFIG_ESP_SYSTEM_CHECK_INT_LEVEL_4=y
-# end of ESP System Settings
-
-#
-# High resolution timer (esp_timer)
-#
-# CONFIG_ESP_TIMER_PROFILING is not set
-CONFIG_ESP_TIME_FUNCS_USE_RTC_TIMER=y
-CONFIG_ESP_TIME_FUNCS_USE_ESP_TIMER=y
-CONFIG_ESP_TIMER_TASK_STACK_SIZE=3584
-CONFIG_ESP_TIMER_INTERRUPT_LEVEL=1
-# CONFIG_ESP_TIMER_SUPPORTS_ISR_DISPATCH_METHOD is not set
-# CONFIG_ESP_TIMER_IMPL_FRC2 is not set
-CONFIG_ESP_TIMER_IMPL_TG0_LAC=y
-# end of High resolution timer (esp_timer)
+CONFIG_HTTPD_PURGE_BUF_LEN=16
 
-#
-# Wi-Fi
-#
-CONFIG_ESP32_WIFI_ENABLED=y
-CONFIG_ESP32_WIFI_STATIC_RX_BUFFER_NUM=10
 CONFIG_ESP32_WIFI_DYNAMIC_RX_BUFFER_NUM=16
-CONFIG_ESP32_WIFI_STATIC_TX_BUFFER=y
-CONFIG_ESP32_WIFI_TX_BUFFER_TYPE=0
-CONFIG_ESP32_WIFI_STATIC_TX_BUFFER_NUM=16
-CONFIG_ESP32_WIFI_CACHE_TX_BUFFER_NUM=16
-# CONFIG_ESP32_WIFI_CSI_ENABLED is not set
-CONFIG_ESP32_WIFI_AMPDU_TX_ENABLED=y
-CONFIG_ESP32_WIFI_TX_BA_WIN=6
-CONFIG_ESP32_WIFI_AMPDU_RX_ENABLED=y
-CONFIG_ESP32_WIFI_RX_BA_WIN=6
-# CONFIG_ESP32_WIFI_AMSDU_TX_ENABLED is not set
-CONFIG_ESP32_WIFI_NVS_ENABLED=y
-CONFIG_ESP32_WIFI_TASK_PINNED_TO_CORE_0=y
-# CONFIG_ESP32_WIFI_TASK_PINNED_TO_CORE_1 is not set
-CONFIG_ESP32_WIFI_SOFTAP_BEACON_MAX_LEN=752
-CONFIG_ESP32_WIFI_MGMT_SBUF_NUM=32
-CONFIG_ESP32_WIFI_IRAM_OPT=y
-CONFIG_ESP32_WIFI_RX_IRAM_OPT=y
-CONFIG_ESP32_WIFI_ENABLE_WPA3_SAE=y
-# CONFIG_ESP_WIFI_SLP_IRAM_OPT is not set
-# CONFIG_ESP_WIFI_STA_DISCONNECTED_PM_ENABLE is not set
-# CONFIG_ESP_WIFI_GMAC_SUPPORT is not set
-CONFIG_ESP_WIFI_SOFTAP_SUPPORT=y
-# end of Wi-Fi
 
-#
-# Core dump
-#
-# CONFIG_ESP_COREDUMP_ENABLE_TO_FLASH is not set
-# CONFIG_ESP_COREDUMP_ENABLE_TO_UART is not set
-CONFIG_ESP_COREDUMP_ENABLE_TO_NONE=y
-# end of Core dump
+CONFIG_ESP32_WIFI_CACHE_TX_BUFFER_NUM=16
 
-#
-# FAT Filesystem support
-#
-# CONFIG_FATFS_CODEPAGE_DYNAMIC is not set
-CONFIG_FATFS_CODEPAGE_437=y
-# CONFIG_FATFS_CODEPAGE_720 is not set
-# CONFIG_FATFS_CODEPAGE_737 is not set
-# CONFIG_FATFS_CODEPAGE_771 is not set
-# CONFIG_FATFS_CODEPAGE_775 is not set
-# CONFIG_FATFS_CODEPAGE_850 is not set
-# CONFIG_FATFS_CODEPAGE_852 is not set
-# CONFIG_FATFS_CODEPAGE_855 is not set
-# CONFIG_FATFS_CODEPAGE_857 is not set
-# CONFIG_FATFS_CODEPAGE_860 is not set
-# CONFIG_FATFS_CODEPAGE_861 is not set
-# CONFIG_FATFS_CODEPAGE_862 is not set
-# CONFIG_FATFS_CODEPAGE_863 is not set
-# CONFIG_FATFS_CODEPAGE_864 is not set
-# CONFIG_FATFS_CODEPAGE_865 is not set
-# CONFIG_FATFS_CODEPAGE_866 is not set
-# CONFIG_FATFS_CODEPAGE_869 is not set
-# CONFIG_FATFS_CODEPAGE_932 is not set
-# CONFIG_FATFS_CODEPAGE_936 is not set
-# CONFIG_FATFS_CODEPAGE_949 is not set
-# CONFIG_FATFS_CODEPAGE_950 is not set
-CONFIG_FATFS_CODEPAGE=437
-# CONFIG_FATFS_LFN_NONE is not set
 CONFIG_FATFS_LFN_HEAP=y
-# CONFIG_FATFS_LFN_STACK is not set
+
 CONFIG_FATFS_MAX_LFN=255
 CONFIG_FATFS_API_ENCODING_ANSI_OEM=y
-# CONFIG_FATFS_API_ENCODING_UTF_16 is not set
-# CONFIG_FATFS_API_ENCODING_UTF_8 is not set
-CONFIG_FATFS_FS_LOCK=0
-CONFIG_FATFS_TIMEOUT_MS=10000
-CONFIG_FATFS_PER_FILE_CACHE=y
-CONFIG_FATFS_ALLOC_PREFER_EXTRAM=y
-# CONFIG_FATFS_USE_FASTSEEK is not set
-# end of FAT Filesystem support
 
-#
-# Modbus configuration
-#
-CONFIG_FMB_COMM_MODE_TCP_EN=y
-CONFIG_FMB_TCP_PORT_DEFAULT=502
-CONFIG_FMB_TCP_PORT_MAX_CONN=5
-CONFIG_FMB_TCP_CONNECTION_TOUT_SEC=20
-CONFIG_FMB_COMM_MODE_RTU_EN=y
-CONFIG_FMB_COMM_MODE_ASCII_EN=y
-CONFIG_FMB_MASTER_TIMEOUT_MS_RESPOND=150
-CONFIG_FMB_MASTER_DELAY_MS_CONVERT=200
-CONFIG_FMB_QUEUE_LENGTH=20
-CONFIG_FMB_PORT_TASK_STACK_SIZE=4096
-CONFIG_FMB_SERIAL_BUF_SIZE=256
-CONFIG_FMB_SERIAL_ASCII_BITS_PER_SYMB=8
-CONFIG_FMB_SERIAL_ASCII_TIMEOUT_RESPOND_MS=1000
-CONFIG_FMB_PORT_TASK_PRIO=10
-# CONFIG_FMB_PORT_TASK_AFFINITY_NO_AFFINITY is not set
-CONFIG_FMB_PORT_TASK_AFFINITY_CPU0=y
-# CONFIG_FMB_PORT_TASK_AFFINITY_CPU1 is not set
-CONFIG_FMB_PORT_TASK_AFFINITY=0x0
-CONFIG_FMB_CONTROLLER_SLAVE_ID_SUPPORT=y
-CONFIG_FMB_CONTROLLER_SLAVE_ID=0x00112233
-CONFIG_FMB_CONTROLLER_NOTIFY_TIMEOUT=20
-CONFIG_FMB_CONTROLLER_NOTIFY_QUEUE_SIZE=20
-CONFIG_FMB_CONTROLLER_STACK_SIZE=4096
-CONFIG_FMB_EVENT_QUEUE_TIMEOUT=20
 CONFIG_FMB_TIMER_PORT_ENABLED=y
-CONFIG_FMB_TIMER_GROUP=0
-CONFIG_FMB_TIMER_INDEX=0
-CONFIG_FMB_MASTER_TIMER_GROUP=0
-CONFIG_FMB_MASTER_TIMER_INDEX=0
-# CONFIG_FMB_TIMER_ISR_IN_IRAM is not set
-# end of Modbus configuration
-
-#
-# FreeRTOS
-#
-# CONFIG_FREERTOS_UNICORE is not set
-CONFIG_FREERTOS_NO_AFFINITY=0x7FFFFFFF
-CONFIG_FREERTOS_TICK_SUPPORT_CORETIMER=y
-CONFIG_FREERTOS_CORETIMER_0=y
-# CONFIG_FREERTOS_CORETIMER_1 is not set
-CONFIG_FREERTOS_SYSTICK_USES_CCOUNT=y
-CONFIG_FREERTOS_HZ=100
-CONFIG_FREERTOS_ASSERT_ON_UNTESTED_FUNCTION=y
-# CONFIG_FREERTOS_CHECK_STACKOVERFLOW_NONE is not set
-# CONFIG_FREERTOS_CHECK_STACKOVERFLOW_PTRVAL is not set
-CONFIG_FREERTOS_CHECK_STACKOVERFLOW_CANARY=y
-# CONFIG_FREERTOS_WATCHPOINT_END_OF_STACK is not set
-CONFIG_FREERTOS_INTERRUPT_BACKTRACE=y
-CONFIG_FREERTOS_THREAD_LOCAL_STORAGE_POINTERS=1
-CONFIG_FREERTOS_ASSERT_FAIL_ABORT=y
-# CONFIG_FREERTOS_ASSERT_FAIL_PRINT_CONTINUE is not set
-# CONFIG_FREERTOS_ASSERT_DISABLE is not set
-CONFIG_FREERTOS_IDLE_TASK_STACKSIZE=1536
-CONFIG_FREERTOS_ISR_STACKSIZE=1536
-# CONFIG_FREERTOS_LEGACY_HOOKS is not set
-CONFIG_FREERTOS_MAX_TASK_NAME_LEN=16
-CONFIG_FREERTOS_SUPPORT_STATIC_ALLOCATION=y
-# CONFIG_FREERTOS_ENABLE_STATIC_TASK_CLEAN_UP is not set
-CONFIG_FREERTOS_TIMER_TASK_PRIORITY=1
-CONFIG_FREERTOS_TIMER_TASK_STACK_DEPTH=2048
-CONFIG_FREERTOS_TIMER_QUEUE_LENGTH=10
-CONFIG_FREERTOS_QUEUE_REGISTRY_SIZE=0
-# CONFIG_FREERTOS_USE_TRACE_FACILITY is not set
-# CONFIG_FREERTOS_GENERATE_RUN_TIME_STATS is not set
-CONFIG_FREERTOS_CHECK_MUTEX_GIVEN_BY_OWNER=y
-# CONFIG_FREERTOS_CHECK_PORT_CRITICAL_COMPLIANCE is not set
-# CONFIG_FREERTOS_PLACE_FUNCTIONS_INTO_FLASH is not set
-CONFIG_FREERTOS_DEBUG_OCDAWARE=y
-# CONFIG_FREERTOS_FPU_IN_ISR is not set
-CONFIG_FREERTOS_ENABLE_TASK_SNAPSHOT=y
-# CONFIG_FREERTOS_PLACE_SNAPSHOT_FUNS_INTO_FLASH is not set
-# end of FreeRTOS
-
-#
-# Hardware Abstraction Layer (HAL) and Low Level (LL)
-#
-CONFIG_HAL_ASSERTION_EQUALS_SYSTEM=y
-# CONFIG_HAL_ASSERTION_DISABLE is not set
-# CONFIG_HAL_ASSERTION_SILIENT is not set
-# CONFIG_HAL_ASSERTION_ENABLE is not set
-CONFIG_HAL_DEFAULT_ASSERTION_LEVEL=2
-# end of Hardware Abstraction Layer (HAL) and Low Level (LL)
-
-#
-# Heap memory debugging
-#
-CONFIG_HEAP_POISONING_DISABLED=y
-# CONFIG_HEAP_POISONING_LIGHT is not set
-# CONFIG_HEAP_POISONING_COMPREHENSIVE is not set
-CONFIG_HEAP_TRACING_OFF=y
-# CONFIG_HEAP_TRACING_STANDALONE is not set
-# CONFIG_HEAP_TRACING_TOHOST is not set
-# CONFIG_HEAP_ABORT_WHEN_ALLOCATION_FAILS is not set
-# end of Heap memory debugging
-
-#
-# jsmn
-#
-# CONFIG_JSMN_PARENT_LINKS is not set
-# CONFIG_JSMN_STRICT is not set
-# end of jsmn
-
-#
-# libsodium
-#
-# end of libsodium
-
-#
-# Log output
-#
-# CONFIG_LOG_DEFAULT_LEVEL_NONE is not set
-# CONFIG_LOG_DEFAULT_LEVEL_ERROR is not set
-# CONFIG_LOG_DEFAULT_LEVEL_WARN is not set
-CONFIG_LOG_DEFAULT_LEVEL_INFO=y
-# CONFIG_LOG_DEFAULT_LEVEL_DEBUG is not set
-# CONFIG_LOG_DEFAULT_LEVEL_VERBOSE is not set
-CONFIG_LOG_DEFAULT_LEVEL=3
-CONFIG_LOG_MAXIMUM_EQUALS_DEFAULT=y
-# CONFIG_LOG_MAXIMUM_LEVEL_DEBUG is not set
-# CONFIG_LOG_MAXIMUM_LEVEL_VERBOSE is not set
-CONFIG_LOG_MAXIMUM_LEVEL=3
-CONFIG_LOG_COLORS=y
-CONFIG_LOG_TIMESTAMP_SOURCE_RTOS=y
-# CONFIG_LOG_TIMESTAMP_SOURCE_SYSTEM is not set
-# end of Log output
-
-#
-# LWIP
-#
-CONFIG_LWIP_LOCAL_HOSTNAME="espressif"
-# CONFIG_LWIP_NETIF_API is not set
-# CONFIG_LWIP_TCPIP_CORE_LOCKING is not set
-CONFIG_LWIP_DNS_SUPPORT_MDNS_QUERIES=y
-# CONFIG_LWIP_L2_TO_L3_COPY is not set
-# CONFIG_LWIP_IRAM_OPTIMIZATION is not set
-CONFIG_LWIP_TIMERS_ONDEMAND=y
-CONFIG_LWIP_MAX_SOCKETS=10
-# CONFIG_LWIP_USE_ONLY_LWIP_SELECT is not set
-# CONFIG_LWIP_SO_LINGER is not set
-CONFIG_LWIP_SO_REUSE=y
-CONFIG_LWIP_SO_REUSE_RXTOALL=y
-# CONFIG_LWIP_SO_RCVBUF is not set
-# CONFIG_LWIP_NETBUF_RECVINFO is not set
-CONFIG_LWIP_IP4_FRAG=y
-CONFIG_LWIP_IP6_FRAG=y
-# CONFIG_LWIP_IP4_REASSEMBLY is not set
-# CONFIG_LWIP_IP6_REASSEMBLY is not set
-# CONFIG_LWIP_IP_FORWARD is not set
-# CONFIG_LWIP_STATS is not set
-# CONFIG_LWIP_ETHARP_TRUST_IP_MAC is not set
-CONFIG_LWIP_ESP_GRATUITOUS_ARP=y
-CONFIG_LWIP_GARP_TMR_INTERVAL=60
-CONFIG_LWIP_TCPIP_RECVMBOX_SIZE=32
-CONFIG_LWIP_DHCP_DOES_ARP_CHECK=y
-# CONFIG_LWIP_DHCP_DISABLE_CLIENT_ID is not set
-CONFIG_LWIP_DHCP_DISABLE_VENDOR_CLASS_ID=y
-# CONFIG_LWIP_DHCP_RESTORE_LAST_IP is not set
-CONFIG_LWIP_DHCP_OPTIONS_LEN=68
-
-#
-# DHCP server
-#
-CONFIG_LWIP_DHCPS=y
-CONFIG_LWIP_DHCPS_LEASE_UNIT=60
-CONFIG_LWIP_DHCPS_MAX_STATION_NUM=8
-# end of DHCP server
-
-# CONFIG_LWIP_AUTOIP is not set
-CONFIG_LWIP_IPV6=y
-# CONFIG_LWIP_IPV6_AUTOCONFIG is not set
-CONFIG_LWIP_IPV6_NUM_ADDRESSES=3
-# CONFIG_LWIP_IPV6_FORWARD is not set
-# CONFIG_LWIP_NETIF_STATUS_CALLBACK is not set
-CONFIG_LWIP_NETIF_LOOPBACK=y
-CONFIG_LWIP_LOOPBACK_MAX_PBUFS=8
-
-#
-# TCP
-#
-CONFIG_LWIP_MAX_ACTIVE_TCP=16
-CONFIG_LWIP_MAX_LISTENING_TCP=16
-CONFIG_LWIP_TCP_HIGH_SPEED_RETRANSMISSION=y
-CONFIG_LWIP_TCP_MAXRTX=12
-CONFIG_LWIP_TCP_SYNMAXRTX=12
-CONFIG_LWIP_TCP_MSS=1440
-CONFIG_LWIP_TCP_TMR_INTERVAL=250
-CONFIG_LWIP_TCP_MSL=60000
-CONFIG_LWIP_TCP_SND_BUF_DEFAULT=5744
-CONFIG_LWIP_TCP_WND_DEFAULT=5744
-CONFIG_LWIP_TCP_RECVMBOX_SIZE=6
-CONFIG_LWIP_TCP_QUEUE_OOSEQ=y
-# CONFIG_LWIP_TCP_SACK_OUT is not set
-# CONFIG_LWIP_TCP_KEEP_CONNECTION_WHEN_IP_CHANGES is not set
-CONFIG_LWIP_TCP_OVERSIZE_MSS=y
-# CONFIG_LWIP_TCP_OVERSIZE_QUARTER_MSS is not set
-# CONFIG_LWIP_TCP_OVERSIZE_DISABLE is not set
-CONFIG_LWIP_TCP_RTO_TIME=1500
-# end of TCP
-
-#
-# UDP
-#
-CONFIG_LWIP_MAX_UDP_PCBS=16
-CONFIG_LWIP_UDP_RECVMBOX_SIZE=6
-# end of UDP
-
-#
-# Checksums
-#
-# CONFIG_LWIP_CHECKSUM_CHECK_IP is not set
-# CONFIG_LWIP_CHECKSUM_CHECK_UDP is not set
-CONFIG_LWIP_CHECKSUM_CHECK_ICMP=y
-# end of Checksums
-
-CONFIG_LWIP_TCPIP_TASK_STACK_SIZE=3072
-CONFIG_LWIP_TCPIP_TASK_AFFINITY_NO_AFFINITY=y
-# CONFIG_LWIP_TCPIP_TASK_AFFINITY_CPU0 is not set
-# CONFIG_LWIP_TCPIP_TASK_AFFINITY_CPU1 is not set
-CONFIG_LWIP_TCPIP_TASK_AFFINITY=0x7FFFFFFF
-# CONFIG_LWIP_PPP_SUPPORT is not set
-CONFIG_LWIP_IPV6_MEMP_NUM_ND6_QUEUE=3
-CONFIG_LWIP_IPV6_ND6_NUM_NEIGHBORS=5
-# CONFIG_LWIP_SLIP_SUPPORT is not set
-
-#
-# ICMP
-#
-CONFIG_LWIP_ICMP=y
-# CONFIG_LWIP_MULTICAST_PING is not set
-# CONFIG_LWIP_BROADCAST_PING is not set
-# end of ICMP
-
-#
-# LWIP RAW API
-#
-CONFIG_LWIP_MAX_RAW_PCBS=16
-# end of LWIP RAW API
-
-#
-# SNTP
-#
-CONFIG_LWIP_SNTP_MAX_SERVERS=1
-# CONFIG_LWIP_DHCP_GET_NTP_SRV is not set
-CONFIG_LWIP_SNTP_UPDATE_DELAY=3600000
-# end of SNTP
-
-CONFIG_LWIP_ESP_LWIP_ASSERT=y
-
-#
-# Hooks
-#
-# CONFIG_LWIP_HOOK_TCP_ISN_NONE is not set
-CONFIG_LWIP_HOOK_TCP_ISN_DEFAULT=y
-# CONFIG_LWIP_HOOK_TCP_ISN_CUSTOM is not set
-CONFIG_LWIP_HOOK_IP6_ROUTE_NONE=y
-# CONFIG_LWIP_HOOK_IP6_ROUTE_DEFAULT is not set
-# CONFIG_LWIP_HOOK_IP6_ROUTE_CUSTOM is not set
-CONFIG_LWIP_HOOK_ND6_GET_GW_NONE=y
-# CONFIG_LWIP_HOOK_ND6_GET_GW_DEFAULT is not set
-# CONFIG_LWIP_HOOK_ND6_GET_GW_CUSTOM is not set
-CONFIG_LWIP_HOOK_NETCONN_EXT_RESOLVE_NONE=y
-# CONFIG_LWIP_HOOK_NETCONN_EXT_RESOLVE_DEFAULT is not set
-# CONFIG_LWIP_HOOK_NETCONN_EXT_RESOLVE_CUSTOM is not set
-# end of Hooks
-
-# CONFIG_LWIP_DEBUG is not set
-# end of LWIP
-
-#
-# mbedTLS
-#
-CONFIG_MBEDTLS_INTERNAL_MEM_ALLOC=y
-# CONFIG_MBEDTLS_EXTERNAL_MEM_ALLOC is not set
-# CONFIG_MBEDTLS_DEFAULT_MEM_ALLOC is not set
-# CONFIG_MBEDTLS_CUSTOM_MEM_ALLOC is not set
-CONFIG_MBEDTLS_ASYMMETRIC_CONTENT_LEN=y
-CONFIG_MBEDTLS_SSL_IN_CONTENT_LEN=16384
-CONFIG_MBEDTLS_SSL_OUT_CONTENT_LEN=4096
-# CONFIG_MBEDTLS_DYNAMIC_BUFFER is not set
-# CONFIG_MBEDTLS_DEBUG is not set
-
-#
-# mbedTLS v2.28.x related
-#
-# CONFIG_MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH is not set
-# CONFIG_MBEDTLS_X509_TRUSTED_CERT_CALLBACK is not set
-# CONFIG_MBEDTLS_SSL_CONTEXT_SERIALIZATION is not set
-CONFIG_MBEDTLS_SSL_KEEP_PEER_CERTIFICATE=y
-# end of mbedTLS v2.28.x related
-
-#
-# Certificate Bundle
-#
-CONFIG_MBEDTLS_CERTIFICATE_BUNDLE=y
-CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_DEFAULT_FULL=y
-# CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_DEFAULT_CMN is not set
-# CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_DEFAULT_NONE is not set
-# CONFIG_MBEDTLS_CUSTOM_CERTIFICATE_BUNDLE is not set
-CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_MAX_CERTS=200
-# end of Certificate Bundle
-
-# CONFIG_MBEDTLS_ECP_RESTARTABLE is not set
-# CONFIG_MBEDTLS_CMAC_C is not set
-CONFIG_MBEDTLS_HARDWARE_AES=y
-CONFIG_MBEDTLS_HARDWARE_MPI=y
-CONFIG_MBEDTLS_HARDWARE_SHA=y
-CONFIG_MBEDTLS_ROM_MD5=y
-# CONFIG_MBEDTLS_ATCA_HW_ECDSA_SIGN is not set
-# CONFIG_MBEDTLS_ATCA_HW_ECDSA_VERIFY is not set
-CONFIG_MBEDTLS_HAVE_TIME=y
-# CONFIG_MBEDTLS_HAVE_TIME_DATE is not set
-CONFIG_MBEDTLS_ECDSA_DETERMINISTIC=y
-CONFIG_MBEDTLS_SHA512_C=y
-CONFIG_MBEDTLS_TLS_SERVER_AND_CLIENT=y
-# CONFIG_MBEDTLS_TLS_SERVER_ONLY is not set
-# CONFIG_MBEDTLS_TLS_CLIENT_ONLY is not set
-# CONFIG_MBEDTLS_TLS_DISABLED is not set
-CONFIG_MBEDTLS_TLS_SERVER=y
-CONFIG_MBEDTLS_TLS_CLIENT=y
-CONFIG_MBEDTLS_TLS_ENABLED=y
 
-#
-# TLS Key Exchange Methods
-#
-# CONFIG_MBEDTLS_PSK_MODES is not set
-CONFIG_MBEDTLS_KEY_EXCHANGE_RSA=y
-CONFIG_MBEDTLS_KEY_EXCHANGE_DHE_RSA=y
-CONFIG_MBEDTLS_KEY_EXCHANGE_ELLIPTIC_CURVE=y
-CONFIG_MBEDTLS_KEY_EXCHANGE_ECDHE_RSA=y
-CONFIG_MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA=y
-CONFIG_MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA=y
-CONFIG_MBEDTLS_KEY_EXCHANGE_ECDH_RSA=y
-# end of TLS Key Exchange Methods
-
-CONFIG_MBEDTLS_SSL_RENEGOTIATION=y
-# CONFIG_MBEDTLS_SSL_PROTO_SSL3 is not set
-CONFIG_MBEDTLS_SSL_PROTO_TLS1=y
-CONFIG_MBEDTLS_SSL_PROTO_TLS1_1=y
-CONFIG_MBEDTLS_SSL_PROTO_TLS1_2=y
-# CONFIG_MBEDTLS_SSL_PROTO_GMTSSL1_1 is not set
-# CONFIG_MBEDTLS_SSL_PROTO_DTLS is not set
-CONFIG_MBEDTLS_SSL_ALPN=y
-CONFIG_MBEDTLS_CLIENT_SSL_SESSION_TICKETS=y
-CONFIG_MBEDTLS_X509_CHECK_KEY_USAGE=y
-CONFIG_MBEDTLS_X509_CHECK_EXTENDED_KEY_USAGE=y
-CONFIG_MBEDTLS_SERVER_SSL_SESSION_TICKETS=y
-
-#
-# Symmetric Ciphers
-#
-CONFIG_MBEDTLS_AES_C=y
-# CONFIG_MBEDTLS_CAMELLIA_C is not set
-# CONFIG_MBEDTLS_DES_C is not set
-CONFIG_MBEDTLS_RC4_DISABLED=y
-# CONFIG_MBEDTLS_RC4_ENABLED_NO_DEFAULT is not set
-# CONFIG_MBEDTLS_RC4_ENABLED is not set
-# CONFIG_MBEDTLS_BLOWFISH_C is not set
-# CONFIG_MBEDTLS_XTEA_C is not set
-CONFIG_MBEDTLS_CCM_C=y
-CONFIG_MBEDTLS_GCM_C=y
-# CONFIG_MBEDTLS_NIST_KW_C is not set
-# end of Symmetric Ciphers
-
-# CONFIG_MBEDTLS_RIPEMD160_C is not set
-
-#
-# Certificates
-#
-CONFIG_MBEDTLS_PEM_PARSE_C=y
-CONFIG_MBEDTLS_PEM_WRITE_C=y
-CONFIG_MBEDTLS_X509_CRL_PARSE_C=y
-CONFIG_MBEDTLS_X509_CSR_PARSE_C=y
-# end of Certificates
-
-CONFIG_MBEDTLS_ECP_C=y
-CONFIG_MBEDTLS_ECDH_C=y
-CONFIG_MBEDTLS_ECDSA_C=y
-# CONFIG_MBEDTLS_ECJPAKE_C is not set
-CONFIG_MBEDTLS_ECP_DP_SECP192R1_ENABLED=y
-CONFIG_MBEDTLS_ECP_DP_SECP224R1_ENABLED=y
-CONFIG_MBEDTLS_ECP_DP_SECP256R1_ENABLED=y
-CONFIG_MBEDTLS_ECP_DP_SECP384R1_ENABLED=y
-CONFIG_MBEDTLS_ECP_DP_SECP521R1_ENABLED=y
-CONFIG_MBEDTLS_ECP_DP_SECP192K1_ENABLED=y
-CONFIG_MBEDTLS_ECP_DP_SECP224K1_ENABLED=y
-CONFIG_MBEDTLS_ECP_DP_SECP256K1_ENABLED=y
-CONFIG_MBEDTLS_ECP_DP_BP256R1_ENABLED=y
-CONFIG_MBEDTLS_ECP_DP_BP384R1_ENABLED=y
-CONFIG_MBEDTLS_ECP_DP_BP512R1_ENABLED=y
-CONFIG_MBEDTLS_ECP_DP_CURVE25519_ENABLED=y
-CONFIG_MBEDTLS_ECP_NIST_OPTIM=y
-# CONFIG_MBEDTLS_POLY1305_C is not set
-# CONFIG_MBEDTLS_CHACHA20_C is not set
-# CONFIG_MBEDTLS_HKDF_C is not set
-# CONFIG_MBEDTLS_THREADING_C is not set
-# CONFIG_MBEDTLS_LARGE_KEY_SOFTWARE_MPI is not set
-# CONFIG_MBEDTLS_SECURITY_RISKS is not set
-# end of mbedTLS
-
-#
-# mDNS
-#
-CONFIG_MDNS_MAX_SERVICES=10
-CONFIG_MDNS_TASK_PRIORITY=1
-CONFIG_MDNS_TASK_STACK_SIZE=4096
-# CONFIG_MDNS_TASK_AFFINITY_NO_AFFINITY is not set
-CONFIG_MDNS_TASK_AFFINITY_CPU0=y
-# CONFIG_MDNS_TASK_AFFINITY_CPU1 is not set
-CONFIG_MDNS_TASK_AFFINITY=0x0
-CONFIG_MDNS_SERVICE_ADD_TIMEOUT_MS=2000
-# CONFIG_MDNS_STRICT_MODE is not set
-CONFIG_MDNS_TIMER_PERIOD_MS=100
-# CONFIG_MDNS_NETWORKING_SOCKET is not set
-CONFIG_MDNS_MULTIPLE_INSTANCE=y
-# end of mDNS
-
-#
-# ESP-MQTT Configurations
-#
-CONFIG_MQTT_PROTOCOL_311=y
-CONFIG_MQTT_TRANSPORT_SSL=y
-CONFIG_MQTT_TRANSPORT_WEBSOCKET=y
-CONFIG_MQTT_TRANSPORT_WEBSOCKET_SECURE=y
-# CONFIG_MQTT_MSG_ID_INCREMENTAL is not set
 CONFIG_MQTT_SKIP_PUBLISH_IF_DISCONNECTED=y
-# CONFIG_MQTT_REPORT_DELETED_MESSAGES is not set
-# CONFIG_MQTT_USE_CUSTOM_CONFIG is not set
-# CONFIG_MQTT_TASK_CORE_SELECTION_ENABLED is not set
-# CONFIG_MQTT_CUSTOM_OUTBOX is not set
-# end of ESP-MQTT Configurations
-
-#
-# Newlib
-#
-CONFIG_NEWLIB_STDOUT_LINE_ENDING_CRLF=y
-# CONFIG_NEWLIB_STDOUT_LINE_ENDING_LF is not set
-# CONFIG_NEWLIB_STDOUT_LINE_ENDING_CR is not set
-# CONFIG_NEWLIB_STDIN_LINE_ENDING_CRLF is not set
-# CONFIG_NEWLIB_STDIN_LINE_ENDING_LF is not set
-CONFIG_NEWLIB_STDIN_LINE_ENDING_CR=y
-# CONFIG_NEWLIB_NANO_FORMAT is not set
-# end of Newlib
-
-#
-# NVS
-#
-# CONFIG_NVS_ASSERT_ERROR_CHECK is not set
-# end of NVS
-
-#
-# OpenSSL
-#
-# CONFIG_OPENSSL_DEBUG is not set
-CONFIG_OPENSSL_ERROR_STACK=y
-# CONFIG_OPENSSL_ASSERT_DO_NOTHING is not set
-CONFIG_OPENSSL_ASSERT_EXIT=y
-# end of OpenSSL
-
-#
-# OpenThread
-#
-# CONFIG_OPENTHREAD_ENABLED is not set
-# end of OpenThread
-
-#
-# PThreads
-#
-CONFIG_PTHREAD_TASK_PRIO_DEFAULT=5
-CONFIG_PTHREAD_TASK_STACK_SIZE_DEFAULT=3072
-CONFIG_PTHREAD_STACK_MIN=768
-CONFIG_PTHREAD_DEFAULT_CORE_NO_AFFINITY=y
-# CONFIG_PTHREAD_DEFAULT_CORE_0 is not set
-# CONFIG_PTHREAD_DEFAULT_CORE_1 is not set
-CONFIG_PTHREAD_TASK_CORE_DEFAULT=-1
-CONFIG_PTHREAD_TASK_NAME_DEFAULT="pthread"
-# end of PThreads
-
-#
-# SPI Flash driver
-#
-# CONFIG_SPI_FLASH_VERIFY_WRITE is not set
-# CONFIG_SPI_FLASH_ENABLE_COUNTERS is not set
-CONFIG_SPI_FLASH_ROM_DRIVER_PATCH=y
-CONFIG_SPI_FLASH_DANGEROUS_WRITE_ABORTS=y
-# CONFIG_SPI_FLASH_DANGEROUS_WRITE_FAILS is not set
-# CONFIG_SPI_FLASH_DANGEROUS_WRITE_ALLOWED is not set
-# CONFIG_SPI_FLASH_USE_LEGACY_IMPL is not set
-# CONFIG_SPI_FLASH_SHARE_SPI1_BUS is not set
-# CONFIG_SPI_FLASH_BYPASS_BLOCK_ERASE is not set
-CONFIG_SPI_FLASH_YIELD_DURING_ERASE=y
-CONFIG_SPI_FLASH_ERASE_YIELD_DURATION_MS=20
-CONFIG_SPI_FLASH_ERASE_YIELD_TICKS=1
-CONFIG_SPI_FLASH_WRITE_CHUNK_SIZE=8192
-# CONFIG_SPI_FLASH_SIZE_OVERRIDE is not set
-# CONFIG_SPI_FLASH_CHECK_ERASE_TIMEOUT_DISABLED is not set
-# CONFIG_SPI_FLASH_OVERRIDE_CHIP_DRIVER_LIST is not set
-
-#
-# Auto-detect flash chips
-#
-CONFIG_SPI_FLASH_SUPPORT_ISSI_CHIP=y
-CONFIG_SPI_FLASH_SUPPORT_MXIC_CHIP=y
-CONFIG_SPI_FLASH_SUPPORT_GD_CHIP=y
-CONFIG_SPI_FLASH_SUPPORT_WINBOND_CHIP=y
-# CONFIG_SPI_FLASH_SUPPORT_BOYA_CHIP is not set
-# CONFIG_SPI_FLASH_SUPPORT_TH_CHIP is not set
-# end of Auto-detect flash chips
-
-CONFIG_SPI_FLASH_ENABLE_ENCRYPTED_READ_WRITE=y
-# end of SPI Flash driver
-
-#
-# SPIFFS Configuration
-#
-CONFIG_SPIFFS_MAX_PARTITIONS=3
-
-#
-# SPIFFS Cache Configuration
-#
-CONFIG_SPIFFS_CACHE=y
-CONFIG_SPIFFS_CACHE_WR=y
-# CONFIG_SPIFFS_CACHE_STATS is not set
-# end of SPIFFS Cache Configuration
-
-CONFIG_SPIFFS_PAGE_CHECK=y
-CONFIG_SPIFFS_GC_MAX_RUNS=10
-# CONFIG_SPIFFS_GC_STATS is not set
-CONFIG_SPIFFS_PAGE_SIZE=256
-CONFIG_SPIFFS_OBJ_NAME_LEN=32
-# CONFIG_SPIFFS_FOLLOW_SYMLINKS is not set
-CONFIG_SPIFFS_USE_MAGIC=y
-CONFIG_SPIFFS_USE_MAGIC_LENGTH=y
-CONFIG_SPIFFS_META_LENGTH=4
-CONFIG_SPIFFS_USE_MTIME=y
-
-#
-# Debug Configuration
-#
-# CONFIG_SPIFFS_DBG is not set
-# CONFIG_SPIFFS_API_DBG is not set
-# CONFIG_SPIFFS_GC_DBG is not set
-# CONFIG_SPIFFS_CACHE_DBG is not set
-# CONFIG_SPIFFS_CHECK_DBG is not set
-# CONFIG_SPIFFS_TEST_VISUALISATION is not set
-# end of Debug Configuration
-# end of SPIFFS Configuration
-
-#
-# TCP Transport
-#
-
-#
-# Websocket
-#
-CONFIG_WS_TRANSPORT=y
-CONFIG_WS_BUFFER_SIZE=1024
-# end of Websocket
-# end of TCP Transport
-
-#
-# Unity unit testing library
-#
-CONFIG_UNITY_ENABLE_FLOAT=y
-CONFIG_UNITY_ENABLE_DOUBLE=y
-# CONFIG_UNITY_ENABLE_64BIT is not set
-# CONFIG_UNITY_ENABLE_COLOR is not set
-CONFIG_UNITY_ENABLE_IDF_TEST_RUNNER=y
-# CONFIG_UNITY_ENABLE_FIXTURE is not set
-# CONFIG_UNITY_ENABLE_BACKTRACE_ON_FAIL is not set
-# end of Unity unit testing library
-
-#
-# Virtual file system
-#
-CONFIG_VFS_SUPPORT_IO=y
-CONFIG_VFS_SUPPORT_DIR=y
-CONFIG_VFS_SUPPORT_SELECT=y
-CONFIG_VFS_SUPPRESS_SELECT_DEBUG_OUTPUT=y
-CONFIG_VFS_SUPPORT_TERMIOS=y
-
-#
-# Host File System I/O (Semihosting)
-#
-CONFIG_VFS_SEMIHOSTFS_MAX_MOUNT_POINTS=1
-# end of Host File System I/O (Semihosting)
-# end of Virtual file system
-
-#
-# Wear Levelling
-#
-# CONFIG_WL_SECTOR_SIZE_512 is not set
-CONFIG_WL_SECTOR_SIZE_4096=y
-CONFIG_WL_SECTOR_SIZE=4096
-# end of Wear Levelling
-
-#
-# Wi-Fi Provisioning Manager
-#
-CONFIG_WIFI_PROV_SCAN_MAX_ENTRIES=16
-CONFIG_WIFI_PROV_AUTOSTOP_TIMEOUT=30
-CONFIG_WIFI_PROV_BLE_FORCE_ENCRYPTION=y
-# end of Wi-Fi Provisioning Manager
-
-#
-# Supplicant
-#
-CONFIG_WPA_MBEDTLS_CRYPTO=y
-# CONFIG_WPA_WAPI_PSK is not set
-# CONFIG_WPA_SUITE_B_192 is not set
-# CONFIG_WPA_DEBUG_PRINT is not set
-# CONFIG_WPA_TESTING_OPTIONS is not set
-# CONFIG_WPA_WPS_STRICT is not set
-# CONFIG_WPA_11KV_SUPPORT is not set
-# CONFIG_WPA_MBO_SUPPORT is not set
-# CONFIG_WPA_DPP_SUPPORT is not set
-# end of Supplicant
-
-#
-# Camera configuration
-#
-# CONFIG_OV7670_SUPPORT is not set
-# CONFIG_OV7725_SUPPORT is not set
-# CONFIG_NT99141_SUPPORT is not set
-CONFIG_OV2640_SUPPORT=y
-# CONFIG_OV3660_SUPPORT is not set
-# CONFIG_OV5640_SUPPORT is not set
-# CONFIG_GC2145_SUPPORT is not set
-# CONFIG_GC032A_SUPPORT is not set
-# CONFIG_GC0308_SUPPORT is not set
-# CONFIG_BF3005_SUPPORT is not set
-CONFIG_BF20A6_SUPPORT=y
-# CONFIG_SC101IOT_SUPPORT is not set
-CONFIG_SC030IOT_SUPPORT=y
-# CONFIG_SCCB_HARDWARE_I2C_PORT0 is not set
-CONFIG_SCCB_HARDWARE_I2C_PORT1=y
-CONFIG_SCCB_CLK_FREQ=100000
-CONFIG_CAMERA_TASK_STACK_SIZE=2048
-CONFIG_CAMERA_CORE0=y
-# CONFIG_CAMERA_CORE1 is not set
-# CONFIG_CAMERA_NO_AFFINITY is not set
-CONFIG_CAMERA_DMA_BUFFER_SIZE_MAX=32768
-# end of Camera configuration
-# end of Component config
-
-#
-# Compatibility options
-#
-# CONFIG_LEGACY_INCLUDE_COMMON_HEADERS is not set
-# end of Compatibility options
 
-# Deprecated options for backward compatibility
-CONFIG_TOOLPREFIX="xtensa-esp32-elf-"
-# CONFIG_LOG_BOOTLOADER_LEVEL_NONE is not set
-# CONFIG_LOG_BOOTLOADER_LEVEL_ERROR is not set
-# CONFIG_LOG_BOOTLOADER_LEVEL_WARN is not set
-CONFIG_LOG_BOOTLOADER_LEVEL_INFO=y
-# CONFIG_LOG_BOOTLOADER_LEVEL_DEBUG is not set
-# CONFIG_LOG_BOOTLOADER_LEVEL_VERBOSE is not set
-CONFIG_LOG_BOOTLOADER_LEVEL=3
-# CONFIG_APP_ROLLBACK_ENABLE is not set
-# CONFIG_FLASH_ENCRYPTION_ENABLED is not set
-# CONFIG_FLASHMODE_QIO is not set
-# CONFIG_FLASHMODE_QOUT is not set
-CONFIG_FLASHMODE_DIO=y
-# CONFIG_FLASHMODE_DOUT is not set
-# CONFIG_MONITOR_BAUD_9600B is not set
-# CONFIG_MONITOR_BAUD_57600B is not set
-CONFIG_MONITOR_BAUD_115200B=y
-# CONFIG_MONITOR_BAUD_230400B is not set
-# CONFIG_MONITOR_BAUD_921600B is not set
-# CONFIG_MONITOR_BAUD_2MB is not set
-# CONFIG_MONITOR_BAUD_OTHER is not set
-CONFIG_MONITOR_BAUD_OTHER_VAL=115200
-CONFIG_MONITOR_BAUD=115200
-# CONFIG_COMPILER_OPTIMIZATION_LEVEL_DEBUG is not set
-CONFIG_COMPILER_OPTIMIZATION_LEVEL_RELEASE=y
-CONFIG_OPTIMIZATION_ASSERTIONS_ENABLED=y
-# CONFIG_OPTIMIZATION_ASSERTIONS_SILENT is not set
-# CONFIG_OPTIMIZATION_ASSERTIONS_DISABLED is not set
-CONFIG_OPTIMIZATION_ASSERTION_LEVEL=2
-# CONFIG_CXX_EXCEPTIONS is not set
-CONFIG_STACK_CHECK_NONE=y
-# CONFIG_STACK_CHECK_NORM is not set
-# CONFIG_STACK_CHECK_STRONG is not set
-# CONFIG_STACK_CHECK_ALL is not set
-# CONFIG_WARN_WRITE_STRINGS is not set
-# CONFIG_DISABLE_GCC8_WARNINGS is not set
-# CONFIG_ESP32_APPTRACE_DEST_TRAX is not set
-CONFIG_ESP32_APPTRACE_DEST_NONE=y
-CONFIG_ESP32_APPTRACE_LOCK_ENABLE=y
-CONFIG_ADC2_DISABLE_DAC=y
-CONFIG_SPIRAM_SUPPORT=y
-# CONFIG_WIFI_LWIP_ALLOCATION_FROM_SPIRAM_FIRST is not set
-CONFIG_TRACEMEM_RESERVE_DRAM=0x0
-# CONFIG_ULP_COPROC_ENABLED is not set
-CONFIG_ULP_COPROC_RESERVE_MEM=0
-CONFIG_BROWNOUT_DET=y
-CONFIG_BROWNOUT_DET_LVL_SEL_0=y
-# CONFIG_BROWNOUT_DET_LVL_SEL_1 is not set
-# CONFIG_BROWNOUT_DET_LVL_SEL_2 is not set
-# CONFIG_BROWNOUT_DET_LVL_SEL_3 is not set
-# CONFIG_BROWNOUT_DET_LVL_SEL_4 is not set
-# CONFIG_BROWNOUT_DET_LVL_SEL_5 is not set
-# CONFIG_BROWNOUT_DET_LVL_SEL_6 is not set
-# CONFIG_BROWNOUT_DET_LVL_SEL_7 is not set
-CONFIG_BROWNOUT_DET_LVL=0
-CONFIG_ESP32_RTC_CLOCK_SOURCE_INTERNAL_RC=y
-# CONFIG_ESP32_RTC_CLOCK_SOURCE_EXTERNAL_CRYSTAL is not set
-# CONFIG_ESP32_RTC_CLOCK_SOURCE_EXTERNAL_OSC is not set
-# CONFIG_ESP32_RTC_CLOCK_SOURCE_INTERNAL_8MD256 is not set
-# CONFIG_DISABLE_BASIC_ROM_CONSOLE is not set
-# CONFIG_NO_BLOBS is not set
-# CONFIG_COMPATIBLE_PRE_V2_1_BOOTLOADERS is not set
-# CONFIG_EVENT_LOOP_PROFILING is not set
-CONFIG_POST_EVENTS_FROM_ISR=y
-CONFIG_POST_EVENTS_FROM_IRAM_ISR=y
-# CONFIG_TWO_UNIVERSAL_MAC_ADDRESS is not set
-CONFIG_FOUR_UNIVERSAL_MAC_ADDRESS=y
-CONFIG_NUMBER_OF_UNIVERSAL_MAC_ADDRESS=4
-# CONFIG_ESP32C3_LIGHTSLEEP_GPIO_RESET_WORKAROUND is not set
-CONFIG_IPC_TASK_STACK_SIZE=1536
-CONFIG_ESP32_PHY_CALIBRATION_AND_DATA_STORAGE=y
-# CONFIG_ESP32_PHY_INIT_DATA_IN_PARTITION is not set
-CONFIG_ESP32_PHY_MAX_WIFI_TX_POWER=20
-CONFIG_ESP32_PHY_MAX_TX_POWER=20
-CONFIG_ESP32_REDUCE_PHY_TX_POWER=y
-# CONFIG_ESP32S2_PANIC_PRINT_HALT is not set
-CONFIG_ESP32S2_PANIC_PRINT_REBOOT=y
-# CONFIG_ESP32S2_PANIC_SILENT_REBOOT is not set
-# CONFIG_ESP32S2_PANIC_GDBSTUB is not set
-CONFIG_SYSTEM_EVENT_QUEUE_SIZE=32
-CONFIG_SYSTEM_EVENT_TASK_STACK_SIZE=2304
-CONFIG_MAIN_TASK_STACK_SIZE=3584
-CONFIG_CONSOLE_UART_DEFAULT=y
-# CONFIG_CONSOLE_UART_CUSTOM is not set
-# CONFIG_ESP_CONSOLE_UART_NONE is not set
-CONFIG_CONSOLE_UART=y
-CONFIG_CONSOLE_UART_NUM=0
-CONFIG_CONSOLE_UART_BAUDRATE=115200
-CONFIG_INT_WDT=y
-CONFIG_INT_WDT_TIMEOUT_MS=300
-CONFIG_INT_WDT_CHECK_CPU1=y
-CONFIG_TASK_WDT=y
-# CONFIG_TASK_WDT_PANIC is not set
-CONFIG_TASK_WDT_TIMEOUT_S=5
-CONFIG_TASK_WDT_CHECK_IDLE_TASK_CPU0=y
-CONFIG_TASK_WDT_CHECK_IDLE_TASK_CPU1=y
-# CONFIG_ESP32_DEBUG_STUBS_ENABLE is not set
-CONFIG_TIMER_TASK_STACK_SIZE=3584
-# CONFIG_ESP32_ENABLE_COREDUMP_TO_FLASH is not set
-# CONFIG_ESP32_ENABLE_COREDUMP_TO_UART is not set
-CONFIG_ESP32_ENABLE_COREDUMP_TO_NONE=y
-CONFIG_MB_MASTER_TIMEOUT_MS_RESPOND=150
-CONFIG_MB_MASTER_DELAY_MS_CONVERT=200
-CONFIG_MB_QUEUE_LENGTH=20
-CONFIG_MB_SERIAL_TASK_STACK_SIZE=4096
-CONFIG_MB_SERIAL_BUF_SIZE=256
-CONFIG_MB_SERIAL_TASK_PRIO=10
-CONFIG_MB_CONTROLLER_SLAVE_ID_SUPPORT=y
-CONFIG_MB_CONTROLLER_SLAVE_ID=0x00112233
-CONFIG_MB_CONTROLLER_NOTIFY_TIMEOUT=20
-CONFIG_MB_CONTROLLER_NOTIFY_QUEUE_SIZE=20
-CONFIG_MB_CONTROLLER_STACK_SIZE=4096
-CONFIG_MB_EVENT_QUEUE_TIMEOUT=20
-CONFIG_MB_TIMER_PORT_ENABLED=y
-CONFIG_MB_TIMER_GROUP=0
-CONFIG_MB_TIMER_INDEX=0
-# CONFIG_ENABLE_STATIC_TASK_CLEAN_UP_HOOK is not set
-CONFIG_TIMER_TASK_PRIORITY=1
-CONFIG_TIMER_TASK_STACK_DEPTH=2048
-CONFIG_TIMER_QUEUE_LENGTH=10
-# CONFIG_L2_TO_L3_COPY is not set
-# CONFIG_USE_ONLY_LWIP_SELECT is not set
-CONFIG_ESP_GRATUITOUS_ARP=y
-CONFIG_GARP_TMR_INTERVAL=60
-CONFIG_TCPIP_RECVMBOX_SIZE=32
-CONFIG_TCP_MAXRTX=12
-CONFIG_TCP_SYNMAXRTX=12
-CONFIG_TCP_MSS=1440
-CONFIG_TCP_MSL=60000
-CONFIG_TCP_SND_BUF_DEFAULT=5744
-CONFIG_TCP_WND_DEFAULT=5744
-CONFIG_TCP_RECVMBOX_SIZE=6
-CONFIG_TCP_QUEUE_OOSEQ=y
-# CONFIG_ESP_TCP_KEEP_CONNECTION_WHEN_IP_CHANGES is not set
-CONFIG_TCP_OVERSIZE_MSS=y
-# CONFIG_TCP_OVERSIZE_QUARTER_MSS is not set
-# CONFIG_TCP_OVERSIZE_DISABLE is not set
-CONFIG_UDP_RECVMBOX_SIZE=6
-CONFIG_TCPIP_TASK_STACK_SIZE=3072
-CONFIG_TCPIP_TASK_AFFINITY_NO_AFFINITY=y
-# CONFIG_TCPIP_TASK_AFFINITY_CPU0 is not set
-# CONFIG_TCPIP_TASK_AFFINITY_CPU1 is not set
-CONFIG_TCPIP_TASK_AFFINITY=0x7FFFFFFF
-# CONFIG_PPP_SUPPORT is not set
-CONFIG_ESP32_PTHREAD_TASK_PRIO_DEFAULT=5
-CONFIG_ESP32_PTHREAD_TASK_STACK_SIZE_DEFAULT=3072
-CONFIG_ESP32_PTHREAD_STACK_MIN=768
-CONFIG_ESP32_DEFAULT_PTHREAD_CORE_NO_AFFINITY=y
-# CONFIG_ESP32_DEFAULT_PTHREAD_CORE_0 is not set
-# CONFIG_ESP32_DEFAULT_PTHREAD_CORE_1 is not set
-CONFIG_ESP32_PTHREAD_TASK_CORE_DEFAULT=-1
-CONFIG_ESP32_PTHREAD_TASK_NAME_DEFAULT="pthread"
-CONFIG_SPI_FLASH_WRITING_DANGEROUS_REGIONS_ABORTS=y
-# CONFIG_SPI_FLASH_WRITING_DANGEROUS_REGIONS_FAILS is not set
-# CONFIG_SPI_FLASH_WRITING_DANGEROUS_REGIONS_ALLOWED is not set
-CONFIG_SUPPRESS_SELECT_DEBUG_OUTPUT=y
-CONFIG_SUPPORT_TERMIOS=y
-CONFIG_SEMIHOSTFS_MAX_MOUNT_POINTS=1
-# End of deprecated options
+CONFIG_FREERTOS_TASK_FUNCTION_WRAPPER=n
+
+CONFIG_OV7670_SUPPORT=n
+CONFIG_OV7725_SUPPORT=n
+CONFIG_NT99141_SUPPORT=n
+CONFIG_OV3660_SUPPORT=n
+CONFIG_OV5640_SUPPORT=n
+CONFIG_GC2145_SUPPORT=n
+CONFIG_GC032A_SUPPORT=n
+CONFIG_GC0308_SUPPORT=n
+CONFIG_BF3005_SUPPORT=n

code/sdkconfig.defaults___away

@@ -1,69 +0,0 @@
-##################################################
-# Application specific configuration
-# Edit this file instead of sdkconfig.esp32cam!
-# After editting, make sure to explicitly delete 
-# sdkconfig.esp32cam to apply your changes!
-##################################################
-
-CONFIG_COMPILER_OPTIMIZATION_DEFAULT=n
-CONFIG_COMPILER_OPTIMIZATION_SIZE=y
-
-CONFIG_ESP32_REV_MIN_0=y
-
-CONFIG_ESP32_DPORT_WORKAROUND=y
-
-CONFIG_ESPTOOLPY_FLASHSIZE_4MB=y
-CONFIG_ESPTOOLPY_FLASHSIZE="4MB"
-CONFIG_ESPTOOLPY_FLASHSIZE_DETECT=y
-
-CONFIG_PARTITION_TABLE_CUSTOM=y
-CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions.csv"
-CONFIG_PARTITION_TABLE_FILENAME="partitions.csv"
-CONFIG_PARTITION_TABLE_OFFSET=0x8000
-CONFIG_PARTITION_TABLE_MD5=y
-
-CONFIG_VFS_SUPPORT_IO=y
-
-CONFIG_SPIRAM=y
-CONFIG_SPIRAM_SIZE=-1
-CONFIG_SPIRAM_SPEED_40M=y
-CONFIG_SPIRAM=y
-CONFIG_SPIRAM_BOOT_INIT=y
-CONFIG_SPIRAM_USE_MALLOC=y
-CONFIG_SPIRAM_MEMTEST=y
-CONFIG_SPIRAM_MALLOC_ALWAYSINTERNAL=16384
-CONFIG_SPIRAM_MALLOC_RESERVE_INTERNAL=32768
-CONFIG_SPIRAM_CACHE_WORKAROUND=y
-
-CONFIG_ESP_INT_WDT_TIMEOUT_MS=300
-
-CONFIG_HTTPD_MAX_REQ_HDR_LEN=1024
-
-CONFIG_HTTPD_PURGE_BUF_LEN=16
-
-CONFIG_ESP32_WIFI_DYNAMIC_RX_BUFFER_NUM=16
-
-CONFIG_ESP32_WIFI_CACHE_TX_BUFFER_NUM=16
-
-CONFIG_FATFS_LFN_HEAP=y
-
-CONFIG_FATFS_MAX_LFN=255
-CONFIG_FATFS_API_ENCODING_ANSI_OEM=y
-
-CONFIG_FMB_TIMER_PORT_ENABLED=y
-
-CONFIG_MQTT_SKIP_PUBLISH_IF_DISCONNECTED=y
-
-CONFIG_FREERTOS_TASK_FUNCTION_WRAPPER=n
-
-CONFIG_OV7670_SUPPORT=n
-CONFIG_OV7725_SUPPORT=n
-CONFIG_NT99141_SUPPORT=n
-CONFIG_OV3660_SUPPORT=n
-CONFIG_OV5640_SUPPORT=n
-CONFIG_GC2145_SUPPORT=n
-CONFIG_GC032A_SUPPORT=n
-CONFIG_GC0308_SUPPORT=n
-CONFIG_BF3005_SUPPORT=n
-
-CONFIG_RMT_SUPPRESS_DEPRECATE_WARN=y

sd-card/html/edit_config_param.html

@@ -407,7 +407,6 @@ textarea {
 				Set on "false" to ensure, that only positive changes are accepted (typically for counter)
 			</td>
 		</tr>
-<!--
 		<tr class="expert"  id="ex12">
 			<td class="indent1">
 				<input type="checkbox" id="PostProcessing_ErrorMessage_enabled" value="1"  onclick = 'InvertEnableItem("PostProcessing", "ErrorMessage")' unchecked >
@@ -423,7 +422,6 @@ textarea {
 				Do not show error message in return value - in error case, the last valid number will be send out
 			</td>
 		</tr>
--->
 		<tr class="expert" id="ex1dddd">
 			<td class="indent1">
 				<input type="checkbox" id="PostProcessing_CheckDigitIncreaseConsistency_enabled" value="1"  onclick = 'InvertEnableItem("PostProcessing", "CheckDigitIncreaseConsistency")' unchecked >
@@ -1726,7 +1724,7 @@ function UpdateInput() {
 	WriteParameter(param, category, "PostProcessing", "PreValueUse", true);		
 	WriteParameter(param, category, "PostProcessing", "PreValueAgeStartup", true);		
 	WriteParameter(param, category, "PostProcessing", "AllowNegativeRates", true);
-//	WriteParameter(param, category, "PostProcessing", "ErrorMessage", true);
+	WriteParameter(param, category, "PostProcessing", "ErrorMessage", true);
 	WriteParameter(param, category, "PostProcessing", "CheckDigitIncreaseConsistency", true);
 
 	WriteParameter(param, category, "MQTT", "Uri", true);	
@@ -1843,7 +1841,7 @@ function ReadParameterAll()
 	ReadParameter(param, "PostProcessing", "PreValueUse", true);		
 	ReadParameter(param, "PostProcessing", "PreValueAgeStartup", true);		
 	ReadParameter(param, "PostProcessing", "AllowNegativeRates", true);
-//	ReadParameter(param, "PostProcessing", "ErrorMessage", true);
+	ReadParameter(param, "PostProcessing", "ErrorMessage", true);
 	ReadParameter(param, "PostProcessing", "CheckDigitIncreaseConsistency", true);
 
 	ReadParameter(param, "MQTT", "Uri", true);	

sd-card/html/prevalue_set.html

@@ -84,7 +84,7 @@ function setprevalue() {
 	inputVal = inputVal.replace(",", ".");
   	var xhttp = new XMLHttpRequest();
     try {
-          url = basepath + "/setPreValue?value=" + inputVal + "&numbers=" + _number;     
+          url = basepath + "/setPreValue.html?value=" + inputVal + "&numbers=" + _number;     
           xhttp.open("GET", url, false);
           xhttp.send();
           response = xhttp.responseText;
@@ -102,7 +102,7 @@ function loadPrevalue(_basepath) {
 
      var xhttp = new XMLHttpRequest();
      try {
-          url = _basepath + '/setPreValue?numbers=' + _number;     
+          url = _basepath + '/setPreValue.html?numbers=' + _number;     
           xhttp.open("GET", url, false);
           xhttp.send();
           response = xhttp.responseText;

sd-card/html/readconfigparam.js

@@ -172,7 +172,7 @@ function ParseConfig() {
      ParamAddValue(param, catname, "MaxRateType", 1, true);
      ParamAddValue(param, catname, "ExtendedResolution", 1, true);
      ParamAddValue(param, catname, "IgnoreLeadingNaN", 1, true);
-//     ParamAddValue(param, catname, "ErrorMessage");
+     ParamAddValue(param, catname, "ErrorMessage");
      ParamAddValue(param, catname, "CheckDigitIncreaseConsistency");     
 
      var catname = "MQTT";

sd-card/html/wasserzaehler_roi.html

@@ -111,7 +111,7 @@ function refresh() {
 	var basepath = "http://192.168.178.22"; 
 
 	function loadStatus() {
-		url = basepath + '/statusflow';     
+		url = basepath + '/statusflow.html';     
 		var xhttp = new XMLHttpRequest();
 		xhttp.onreadystatechange = function() {
 			if (this.readyState == 4 && this.status == 200) {
@@ -125,7 +125,7 @@ function refresh() {
 	}
 
 	function loadCPUTemp() {
-		url = basepath + '/cpu_temperature';     
+		url = basepath + '/cputemp.html';     
 		var xhttp = new XMLHttpRequest();
 		xhttp.onreadystatechange = function() {
 			if (this.readyState == 4 && this.status == 200) {
@@ -138,7 +138,7 @@ function refresh() {
 	}
 
 	function loadRSSI() {
-		url = basepath + '/rssi';     
+		url = basepath + '/rssi.html';     
 		var xhttp = new XMLHttpRequest();
 		xhttp.onreadystatechange = function() {
 			if (this.readyState == 4 && this.status == 200) {