dyadmisha
/
AI-on-the-edge-device
同期ミラー https://github.com/jomjol/AI-on-the-edge-device


			
							12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576777879808182838485868788899091929394959697989910010110210310410510610710810911011111211311411511611711811912012112212312412512612712812913013113213313413513613713813914014114214314414514614714814915015115215315415515615715815916016116216316416516616716816917017117217317417517617717817918018118218318418518618718818919019119219319419519619719819920020120220320420520620720820921021121221321421521621721821922022122222322422522622722822923023123223323423523623723823924024124224324424524624724824925025125225325425525625725825926026126226326426526626726826927027127227327427527627727827928028128228328428528628728828929029129229329429529629729829930030130230330430530630730830931031131231331431531631731831932032132232332432532632732832933033133233333433533633733833934034134234334434534634734834935035135235335435535635735835936036136236336436536636736836937037137237337437537637737837938038138238338438538638738838939039139239339439539639739839940040140240340440540640740840941041141241341441541641741841942042142242342442542642742842943043143243343443543643743843944044144244344444544644744844945045145245345445545645745845946046146246346446546646746846947047147247347447547647747847948048148248348448548648748848949049149249349449549649749849950050150250350450550650750850951051151251351451551651751851952052152252352452552652752852953053153253353453553653753853954054154254354454554654754854955055155255355455555655755855956056156256356456556656756856957057157257357457557657757857958058158258358458558658758858959059159259359459559659759859960060160260360460560660760860961061161261361461561661761861962062162262362462562662762862963063163263363463563663763863964064164264364464564664764864965065165265365465565665765865966066166266366466566666766866967067167267367467567667767867968068168268368468568668768868969069169269369469569669769869970070170270370470570670770870971071171271371471571671771871972072172272372472572672772872973073173273373473573673773873974074174274374474574674774874975075175275375475575675775875976076176276376476576676776876977077177277377477577677777877978078178278378478578678778878979079179279379479579679779879980080180280380480580680780880981081181281381481581681781881982082182282382482582682782882983083183283383483583683783883984084184284384484584684784884985085185285385485585685785885986086186286386486586686786886987087187287387487587687787887988088188288388488588688788888989089189289389489589689789889990090190290390490590690790890991091191291391491591691791891992092192292392492592692792892993093193293393493593693793893994094194294394494594694794894995095195295395495595695795895996096196296396496596696796896997097197297397497597697797897998098198298398498598698798898999099199299399499599699799899910001001100210031004100510061007100810091010101110121013101410151016101710181019102010211022102310241025102610271028102910301031103210331034103510361037103810391040104110421043104410451046104710481049105010511052105310541055105610571058105910601061106210631064106510661067106810691070107110721073107410751076107710781079108010811082108310841085108610871088108910901091109210931094109510961097109810991100110111021103110411051106110711081109111011111112111311141115111611171118111911201121112211231124112511261127112811291130113111321133113411351136113711381139114011411142114311441145114611471148114911501151115211531154115511561157115811591160116111621163116411651166116711681169117011711172117311741175117611771178117911801181118211831184118511861187118811891190119111921193119411951196119711981199120012011202120312041205120612071208120912101211121212131214121512161217121812191220122112221223122412251226122712281229123012311232123312341235123612371238123912401241124212431244124512461247124812491250125112521253125412551256125712581259126012611262126312641265126612671268126912701271127212731274127512761277127812791280128112821283128412851286128712881289129012911292129312941295129612971298129913001301130213031304130513061307130813091310131113121313131413151316131713181319132013211322132313241325132613271328132913301331133213331334133513361337133813391340134113421343134413451346134713481349135013511352135313541355135613571358135913601361136213631364136513661367136813691370137113721373137413751376137713781379138013811382138313841385138613871388138913901391139213931394139513961397139813991400140114021403140414051406140714081409141014111412141314141415141614171418141914201421142214231424142514261427142814291430143114321433143414351436143714381439144014411442144314441445144614471448144914501451145214531454145514561457145814591460146114621463146414651466146714681469147014711472147314741475147614771478147914801481148214831484148514861487148814891490149114921493149414951496149714981499150015011502150315041505150615071508150915101511151215131514151515161517151815191520152115221523152415251526152715281529153015311532153315341535153615371538153915401541154215431544154515461547154815491550155115521553155415551556155715581559156015611562156315641565156615671568156915701571157215731574157515761577157815791580158115821583158415851586158715881589159015911592159315941595159615971598159916001601160216031604160516061607160816091610161116121613161416151616161716181619162016211622162316241625162616271628162916301631163216331634163516361637163816391640164116421643164416451646164716481649165016511652165316541655165616571658165916601661166216631664166516661667166816691670167116721673167416751676167716781679168016811682168316841685168616871688168916901691169216931694169516961697169816991700170117021703170417051706170717081709171017111712171317141715171617171718171917201721172217231724172517261727172817291730173117321733173417351736173717381739174017411742174317441745174617471748174917501751175217531754175517561757175817591760176117621763176417651766176717681769177017711772177317741775177617771778177917801781178217831784178517861787178817891790179117921793179417951796179717981799180018011802180318041805180618071808180918101811181218131814181518161817181818191820182118221823182418251826182718281829183018311832183318341835183618371838183918401841184218431844184518461847184818491850185118521853185418551856185718581859186018611862186318641865186618671868186918701871187218731874187518761877187818791880188118821883188418851886188718881889189018911892189318941895189618971898189919001901190219031904190519061907190819091910191119121913191419151916191719181919192019211922192319241925192619271928192919301931193219331934193519361937193819391940194119421943194419451946194719481949195019511952195319541955195619571958195919601961196219631964196519661967196819691970197119721973197419751976197719781979198019811982198319841985198619871988198919901991199219931994199519961997199819992000200120022003200420052006200720082009201020112012201320142015201620172018201920202021
							<!DOCTYPE html>
<html>
<head>
<link rel="icon" href="data:,">
<title>Edit Config</title>
<meta charset="utf-8">

<style>
h1 {font-size: 2em;}
h2 {font-size: 1.5em; margin-block-start: 0.0em; margin-block-end: 0.2em;}
h3 {font-size: 1.2em;}
p {font-size: 1em;}

.button {
	padding: 5px 20px;
    width: 211px;
	font-size: 16px;	
}

textarea {
	font-size: 14px;
}

.description {
	color: black;
	font-size: 80%;
}

.disabled {
	color:lightgrey;
}

.smallSelect {
	width: 30px;
}

.invalid-input {
	background-color: #FFAA00;
}

.hidden {
	display: none;
}
</style>

</head>

<body style="font-family: arial; padding: 0px 10px;">
	<table style="width:100%">
		<tr>
			<td>
				<h2>Config.ini:</h2>
			</td>
			<td>
				<button class="button" id="Edit_Config_Direct" onclick="editConfigDirect()" style="display:none">Edit Config.ini direct</button>
				<input type="checkbox" id="ExpertModus_enabled" value="1"  onclick = 'UpdateExpertModus()' unchecked><label for="ExpertModus_enabled"> Expert Mode </label> 
			</td>
		</tr>
	</table>

	<br>

	<div id = "divall" style="display:none">

	<table>
		<tr>
			<th width="20px"  style="text-align: left;">
				Enable
			</th>
			<th  width="200px"  style="text-align: left;">
				Parameter
			</th>
			<th style="text-align: left;">
				Value
			</th>
			<th style="text-align: left;">
				Information
			</th>
		</tr>

		<tr>
			<td colspan="4" style="padding-left: 20px;"><h4>MakeImage</h4></td>
		</tr> 
		<tr>
			<td width="20px"  style="padding-left: 40px;">
				<input type="checkbox" id="MakeImage_LogImageLocation_enabled" value="1"  onclick = 'InvertEnableItem("MakeImage", "LogImageLocation")' unchecked >
			</td>
			<td  width="200px">
				<class id="MakeImage_LogImageLocation_text" style="color:black;">LogImageLocation</class>
			</td>
			<td>
				<input type="text" name="name" id="MakeImage_LogImageLocation_value1">
			</td>
			<td class="description">
				Location to store raw images for logging
			</td>
		</tr>
		<tr>
			<td width="20px" style="padding-left: 40px;">
				<td"><input type="checkbox" id="MakeImage_LogfileRetentionInDays_enabled" value="1"  onclick = 'InvertEnableItem("MakeImage", "LogfileRetentionInDays")' unchecked ></td>
			</td>
			<td>
				<class id="MakeImage_LogfileRetentionInDays_text" style="color:black;">LogfileRetentionInDays</class>
			</td>
			<td>
				<input type="number" id="MakeImage_LogfileRetentionInDays_value1" size="13"  min="0" step="1">
			</td>
			<td class="description">
				Time to keep the raw image (in days -"0" = forever)
			</td>
		</tr>
		<tr class="expert" id="ex1">
			
			<td width="20px" style="padding-left: 40px;">
			</td>
			<td>
				<class id="MakeImage_WaitBeforeTakingPicture_text" style="color:black;">WaitBeforeTakingPicture</class>
			</td>
			<td>
				<input type="number" id="MakeImage_WaitBeforeTakingPicture_value1" size="13" min="0" step="any">
			</td>
			<td class="description">
				Wait time between illumination switch on and take the picture (in seconds)
			</td>
		</tr>
		<tr class="expert" id="ex2">
			<td width="20px" style="padding-left: 40px;">
			</td>
			<td>
				<class id="MakeImage_ImageQuality_text" style="color:black;">ImageQuality</class>
			</td>
			<td>
				<input type="number" id="MakeImage_ImageQuality_value1" size="13"   min="0" max="63">
			</td>
			<td class="description">
				Quality index for picture (default = "12" - "0" high ... "63" low) <br>
				Remark: values smaller than 12 can result in a reboot, as the bigger sized JPEG might not fit in the available RAM!
			</td>
		</tr>
		<tr class="expert"  id="ex3">
			<td width="20px" style="padding-left: 40px;">
			</td>
			<td>
				<class id="MakeImage_ImageSize_text" style="color:black;">ImageSize</class>
			</td>
			<td>
				<select id="MakeImage_ImageSize_value1">
					<option value="VGA" selected>VGA</option>
					<option value="QVGA" >QVGA</option>
				</select>
			</td>
			<td class="description">
				Picture size camera (default = "VGA")
			</td>
		</tr>

		<tr class="expert"  id="LEDIntensity_ex3">
			<td width="20px" style="padding-left: 40px;">
			</td>
			<td>
				<class id="MakeImage_LEDIntensity_text" style="color:black;">LEDIntensity</class>
			</td>
			<td>
				<input type="number" id="MakeImage_LEDIntensity_value1" size="13"   min="0" max="100">
			</td>
			<td style="font-size: 80%;">
				Internal LED Flash Intensity (PWM from 0% - 100%). <br>
				Remark: as the camera autoillumination settings are used, this is rather for energy saving, than reducing reflections.
			</td>
		</tr>

		<tr class="expert"  id="Brightness_ex3">
			<td width="20px" style="padding-left: 40px;">
			</td>
			<td>
				<class id="MakeImage_Brightness_text" style="color:black;">Brightness</class>
			</td>
			<td>
				<input type="number" id="MakeImage_Brightness_value1" size="13"   min="-2" max="2">
			</td>
			<td style="font-size: 80%;">
				Image Brightness (-2 .. 2 - default = "0")
			</td>
		</tr>

		<tr class="expert"  id="Contrast_ex3">
			<td width="20px" style="padding-left: 40px;">
			</td>
			<td>
				<class id="MakeImage_Contrast_text" style="color:black;">Contrast</class>
			</td>
			<td>
				<input type="number" id="MakeImage_Contrast_value1" size="13"   min="-2" max="2">
			</td>
			<td style="font-size: 80%;">
				Image Contrast (-2 .. 2 - default = "0") <br>
				Remark: camera driver is not fully supporting this setting yet (no impact on image)
			</td>
		</tr>

		<tr class="expert"  id="Saturation_ex3">
			<td width="20px" style="padding-left: 40px;">
			</td>
			<td>
				<class id="MakeImage_Saturation_text" style="color:black;">Saturation</class>
			</td>
			<td>
				<input type="number" id="MakeImage_Saturation_value1" size="13"   min="-2" max="2">
			</td>
			<td style="font-size: 80%;">
				Image Saturation (-2 .. 2 - default = "0") <br>
				Remark: camera driver is not fully supporting this setting yet (no impact on image)
			</td>
		</tr>
		
		<tr class="expert"  id="MakeImage_FixedExposure_ex10">
			<td width="20px"  style="padding-left: 40px;">
			</td>
			<td  width="200px">
				<class id="MakeImage_FixedExposure_text" style="color:black;">FixedExposure</class>
			</td>
			<td>
				<select id="MakeImage_FixedExposure_value1">
					<option value="true" selected>true</option>
					<option value="false" >false</option>
				</select>
			</td>
			<td style="font-size: 80%;">
				Fixes the illumination setting of camera at the startup and uses this later --> individual round is faster
			</td>
		</tr>


		<tr class="expert"  id="ex4">
			<td colspan="4" style="padding-left: 20px;"><h4>Alignment</h4></td>
		</tr> 
		<tr class="expert"  id="ex6">
			<td  width="20px"  style="padding-left: 40px;">
			</td>
			<td width="200px">
				<class id="Alignment_SearchFieldX_text" style="color:black;">SearchFieldX</class>
			</td>
			<td>
				<input type="number" name="name" id="Alignment_SearchFieldX_value1" size="13" min="1"  step="1">
			</td>
			<td style="font-size: 80%;">
				x size (width) in which the reference is searched (default = "20") 
			</td>
		</tr>
		<tr class="expert"  id="ex8">
			<td  width="20px"  style="padding-left: 40px;">
			</td>
			<td>
				<class id="Alignment_SearchFieldY_text" style="color:black;">SearchFieldY</class>
			</td>
			<td>
				<input type="number" name="name" id="Alignment_SearchFieldY_value1" size="13" min="1">
			</td>
			<td style="font-size: 80%;">
				y size (height) in which the reference is searched (default = "20") 
			</td>
		</tr>
		<tr class="expert"  id="AlignmentAlgo_ex8">
			<td  width="20px"  style="padding-left: 40px;">
				<input type="checkbox" id="Alignment_AlignmentAlgo_enabled" value="1"  onclick = 'InvertEnableItem("Alignment", "AlignmentAlgo")' unchecked >
			</td>
			<td>
				<class id="Alignment_AlignmentAlgo_text" style="color:black;">AlignmentAlgo</class>
			</td>
			<td>
				<select id="Alignment_AlignmentAlgo_value1">
					<option value="default" selected>Default</option>
					<option value="highAccurity" >HighAccurity</option>
					<option value="fast" >Fast</option>
				</select>
				</td>
			<td style="font-size: 80%;">
				"Default" = use only R-Channel, "HighAccurity" = use all Channels (RGB, 3x slower), <br> "Fast" (First time RGB, then only check if image is shifted) 
			</td>
		</tr>


		<tr id="Category_Digits_ex4">
			<td colspan="4" style="padding-left: 20px;">
				<h4><input type="checkbox" id="Category_Digits_enabled" value="1"  onclick = 'UpdateAfterCategoryCheck()' unchecked >Digits</h4></td>
		</tr> 
		<tr>
			<td width="20px"  style="padding-left: 40px;">
			</td>
			<td  width="200px">
				<class id="Digits_Model_text" style="color:black;">Model</class>
			</td>
			<td>
				<select id="Digits_Model_value1">
				</select>
			</td>
			<td style="font-size: 80%;">
				Path to CNN model file for image recognition
			</td>
		</tr>
		<tr>
			<td width="20px"  style="padding-left: 40px;">
				<input type="checkbox" id="Digits_LogImageLocation_enabled" value="1"  onclick = 'InvertEnableItem("Digits", "LogImageLocation")' unchecked >
			</td>
			<td>
				<class id="Digits_LogImageLocation_text" style="color:black;">LogImageLocation</class>
			</td>
			<td>
				<input type="text" name="name" id="Digits_LogImageLocation_value1">
			</td>
			<td style="font-size: 80%;">
				Location to store separated digits for logging
			</td>
		</tr>
		<tr>
			<td width="20px"  style="padding-left: 40px;">
				<td"><input type="checkbox" id="Digits_LogfileRetentionInDays_enabled" value="1"  onclick = 'InvertEnableItem("Digits", "LogfileRetentionInDays")' unchecked ></td>
			</td>
			<td>
				<class id="Digits_LogfileRetentionInDays_text" style="color:black;">LogfileRetentionInDays</class>
			</td>
			<td>
				<input type="number" id="Digits_LogfileRetentionInDays_value1" min="0"  step="1">
			</td>
			<td style="font-size: 80%;">
				Time to keep the separated digit images (in days -"0" = forever)
			</td>
		</tr>
		<tr class="expert"  id="ex9">
			<td width="20px"  style="padding-left: 40px;">
			</td>
			<td>
				<class id="Digits_ModelInputSize_text" style="color:black;">ModelInputSize</class>
			</td>
			<td>
				x: <input type="number" id="Digits_ModelInputSize_value1" class="smallSelect" min="1" step="1">
				y: <input type="number" id="Digits_ModelInputSize_value2" class="smallSelect" min="1" step="1">
			</td>
			<td style="font-size: 80%;">
				Size of the input image for the CNN model
			</td>
		</tr>

		<tr id="Category_Analog_ex4">
			<td colspan="4" style="padding-left: 20px;">
				<h4><input type="checkbox" id="Category_Analog_enabled" value="1"  onclick = 'UpdateAfterCategoryCheck()' unchecked > Analog</h4></td>
		</tr> 
		<tr>
			<td width="20px"  style="padding-left: 40px;"> </td>
			<td width="200px"> <class id="Analog_Model_text" style="color:black;">Model</class> </td>
			<td> 
				<select id="Analog_Model_value1">
				</select>
			</td>
			<td style="font-size: 80%;"> Path to CNN model file for image recognition</td>
		</tr>
		<tr>
			<td width="20px"  style="padding-left: 40px;">
				<input type="checkbox" id="Analog_LogImageLocation_enabled" value="1"  onclick = 'InvertEnableItem("Analog", "LogImageLocation")' unchecked >
			</td>
			<td> <class id="Analog_LogImageLocation_text" style="color:black;">LogImageLocation</class> </td>
			<td> <input type="text" name="name" id="Analog_LogImageLocation_value1"> </td>
			<td style="font-size: 80%;"> Location to store separated digits for logging </td>
		</tr>
		<tr>
			<td width="20px"  style="padding-left: 40px;">
				<td"><input type="checkbox" id="Analog_LogfileRetentionInDays_enabled" value="1"  onclick = 'InvertEnableItem("Analog", "LogfileRetentionInDays")' unchecked ></td>
			</td>
			<td> <class id="Analog_LogfileRetentionInDays_text" style="color:black;">LogfileRetentionInDays</class> </td>
			<td> <input type="number" id="Analog_LogfileRetentionInDays_value1" min="0" step="1"> </td>
			<td style="font-size: 80%;"> Time to keep the separated digit images (in days -"0" = forever) </td>
		</tr>

		<tr class="expert"  id="ex10">
			<td width="20px"  style="padding-left: 40px;"> </td>
			<td> <class id="Analog_ModelInputSize_text" style="color:black;">ModelInputSize</class> </td>
			<td>
				x: <input type="number" id="Analog_ModelInputSize_value1" class="smallSelect" min="1" step="1">
				y: <input type="number" id="Analog_ModelInputSize_value2" class="smallSelect" min="1" step="1">
			</td>
			<td style="font-size: 80%;"> Size of the input image for the CNN model </td>
		</tr>

		<tr>
			<td colspan="4" style="padding-left: 20px;"><h4>PostProcessing</h4></td>
		</tr> 		
		<tr>
			<td width="20px"  style="padding-left: 40px;">
				<input type="checkbox" id="PostProcessing_PreValueUse_enabled" value="1"  onclick = 'InvertEnableItem("PostProcessing", "PreValueUse")' unchecked >
			</td>
			<td  width="200px">
				<class id="PostProcessing_PreValueUse_text" style="color:black;">PreValueUse</class>
			</td>
			<td>
				<select id="PostProcessing_PreValueUse_value1">
					<option value="true" selected>true</option>
					<option value="false" >false</option>
				</select>
			</td>
			<td style="font-size: 80%;">
				Enable to use the previous read value for consistency checks - also on reboots
			</td>
		</tr>
		<tr class="expert"  id="ex11">
			<td width="20px"  style="padding-left: 40px;">
				<input type="checkbox" id="PostProcessing_PreValueAgeStartup_enabled" value="1"  onclick = 'InvertEnableItem("PostProcessing", "PreValueAgeStartup")' unchecked >
			</td>
			<td  width="200px">
				<class id="PostProcessing_PreValueAgeStartup_text" style="color:black;">PreValueAgeStartup</class>
			</td>
			<td>
				<input type="number" id="PostProcessing_PreValueAgeStartup_value1" size="13"  min="0">
			</td>
			<td style="font-size: 80%;">
				Time (in minutes), how long a previous read value is valid after reboot (default = 720 min)
			</td>
		</tr>
		<tr>
			<td width="20px"  style="padding-left: 40px;">
				<input type="checkbox" id="PostProcessing_AllowNegativeRates_enabled" value="1"  onclick = 'InvertEnableItem("PostProcessing", "AllowNegativeRates")' unchecked >
			</td>
			<td  width="200px">
				<class id="PostProcessing_AllowNegativeRates_text" style="color:black;">AllowNegativeRates</class>
			</td>
			<td>
				<select id="PostProcessing_AllowNegativeRates_value1">
					<option value="true" selected>true</option>
					<option value="false" >false</option>
				</select>
			</td>
			<td style="font-size: 80%;">
				Set on "false" to ensure, that only positive changes are accepted (typically for counter)
			</td>
		</tr>
		<tr class="expert"  id="ex12">
			<td width="20px"  style="padding-left: 40px;">
				<input type="checkbox" id="PostProcessing_ErrorMessage_enabled" value="1"  onclick = 'InvertEnableItem("PostProcessing", "ErrorMessage")' unchecked >
			</td>
			<td  width="200px">
				<class id="PostProcessing_ErrorMessage_text" style="color:black;">ErrorMessage</class>
			</td>
			<td>
				<select id="PostProcessing_ErrorMessage_value1">
					<option value="true" selected>true</option>
					<option value="false" >false</option>
				</select>
			</td>
			<td style="font-size: 80%;">
				Do not show error message in return value - in error case, the last valid number will be send out
			</td>
		</tr>
		<tr class="expert" id="ex1dddd">
			<td width="20px"  style="padding-left: 40px;">
				<input type="checkbox" id="PostProcessing_CheckDigitIncreaseConsistency_enabled" value="1"  onclick = 'InvertEnableItem("PostProcessing", "CheckDigitIncreaseConsistency")' unchecked >
			</td>
			<td  width="200px">
				<class id="PostProcessing_CheckDigitIncreaseConsistency_text" style="color:black;">CheckDigitIncreaseConsistency</class>
			</td>
			<td>
				<select id="PostProcessing_CheckDigitIncreaseConsistency_value1">
					<option value="true" selected>true</option>
					<option value="false" >false</option>
				</select>
			</td>
			<td style="font-size: 80%;">
				Enable additional consistency check - especially zero crossing check between digits
			</td>
		</tr>

		<tr>
			<td style="padding-left: 40px;" colspan="4">
				<br>
				<b>Postprocessing Individual Parameters: 
                <select id="Numbers_value1" onchange="numberChanged()">
                    <option value="0" selected>default</option>
                    <option value="1" >NT</option>
                    <option value="2" >HT</option>
                </select></b>
			</td>
		</tr>
		<tr>
			<td width="20px"  style="padding-left: 40px;">
				<input type="checkbox" id="PostProcessing_DecimalShift_enabled" value="1"  onclick = 'InvertEnableItem("PostProcessing", "DecimalShift")' unchecked >
			</td>
			<td  width="200px">
				<class id="PostProcessing_DecimalShift_text" style="color:black;">DecimalShift</class>
			</td>
			<td>
				<input type="number" id="PostProcessing_DecimalShift_value1" step="1">
			</td>
			<td style="font-size: 80%;">
				Shift the digit separator within the digital digits (positiv and negativ)
			</td>
		</tr>
		<tr>
			<td width="20px"  style="padding-left: 40px;">
				<input type="checkbox" id="PostProcessing_MaxRateValue_enabled" value="1"  onclick = 'InvertEnableItem("PostProcessing", "MaxRateValue")' unchecked >
			</td>
			<td  width="200px">
				<class id="PostProcessing_MaxRateValue_text" style="color:black;">MaxRateValue</class>
			</td>
			<td>
				<input type="number" id="PostProcessing_MaxRateValue_value1" size="13" min="0" step="any">
			</td>
			<td style="font-size: 80%;">
				Maximum change of a reading - if threated as absolute or relative change see next parameter.
			</td>
		</tr>
		<tr>
			<td width="20px"  style="padding-left: 40px;">
				<input type="checkbox" id="PostProcessing_MaxRateType_enabled" value="1"  onclick = 'InvertEnableItem("PostProcessing", "MaxRateType")' unchecked >
			</td>
			<td  width="200px">
				<class id="PostProcessing_MaxRateType_text" style="color:black;">MaxRateType</class>
			</td>
			<td>
				<select id="PostProcessing_MaxRateType_value1">
					<option value="AbsoluteChange" >AbsoluteChange</option>
					<option value="RateChange" selected>RateChange</option>
				</select>
			</td>
			<td style="font-size: 80%;">
				Defines if the change rate compared to the previous value is calculated as absolute change (AbsoluteChange) or as rate normalized to the intervall (RateChange = change/minute).
			</td>
		</tr>
		<tr>
			<td width="20px"  style="padding-left: 40px;">
				<input type="checkbox" id="PostProcessing_ExtendedResolution_enabled" value="1"  onclick = 'InvertEnableItem("PostProcessing", "ExtendedResolution")' unchecked >
			</td>
			<td  width="200px">
				<class id="PostProcessing_ExtendedResolution_text" style="color:black;">ExtendedResolution</class>
			</td>
			<td>
				<select id="PostProcessing_ExtendedResolution_value1">
					<option value="true" >true</option>
					<option value="false" selected>false</option>
				</select>
			</td>
			<td style="font-size: 80%;">
				Enable to use the after point resolution for the last analog counter
			</td>
		</tr>
		
		<tr>
			<td id="ex121" width="20px"  style="padding-left: 40px;">
				<input type="checkbox" id="PostProcessing_IgnoreLeadingNaN_enabled" value="1"  onclick = 'InvertEnableItem("PostProcessing", "IgnoreLeadingNaN")' unchecked >
			</td>
			<td  width="200px">
				<class id="PostProcessing_IgnoreLeadingNaN_text" style="color:black;">IgnoreLeadingNaN</class>
			</td>
			<td>
				<select id="PostProcessing_IgnoreLeadingNaN_value1">
					<option value="true" >true</option>
					<option value="false" selected>false</option>
				</select>
			</td>
			<td style="font-size: 80%;">
				Leading "N"'s will be deleted before further processing
			</td>
		</tr>


		<tr>
			<td colspan="4" style="padding-left: 20px;"><h4><input type="checkbox" id="Category_MQTT_enabled" value="1"  onclick = 'UpdateAfterCategoryCheck()' unchecked > MQTT</h4></td>
		</tr> 		
		<tr>
			<td width="20px"  style="padding-left: 40px;">
				<input type="checkbox" id="MQTT_Uri_enabled" value="1"  onclick = 'InvertEnableItem("MQTT", "Uri")' unchecked >
			</td>
			<td  width="200px">
				<class id="MQTT_Uri_text" style="color:black;">Uri</class>
			</td>
			<td>
				<input type="text" id="MQTT_Uri_value1">
			</td>
			<td style="font-size: 80%;">
				URI to the MQTT broker including port e.g.: mqtt://IP-Address:Port
			</td>
		</tr>
		<tr>
			<td width="20px"  style="padding-left: 40px;">
				<input type="checkbox" id="MQTT_MainTopic_enabled" value="1"  onclick = 'InvertEnableItem("MQTT", "MainTopic")' unchecked >
			</td>
			<td  width="200px">
				<class id="MQTT_MainTopic_text" style="color:black;">MainTopic</class>
			</td>
			<td>
				<input type="text" id="MQTT_MainTopic_value1">
			</td>
			<td style="font-size: 80%;">
				MQTT main topic, under which the counters are published. The single value will be published with the following key: MAINTOPIC/VALUE_NAME/PARAMETER <br>
				where parameters are: value, rate, timestamp, error<br>
				The general connection status can be found in MAINTOPIC/CONNECTION
			</td>
		</tr>
		<tr>
			<td width="20px"  style="padding-left: 40px;">
				<input type="checkbox" id="MQTT_ClientID_enabled" value="1"  onclick = 'InvertEnableItem("MQTT", "ClientID")' unchecked >
			</td>
			<td  width="200px">
				<class id="MQTT_ClientID_text" style="color:black;">ClientID</class>
			</td>
			<td>
				<input type="text" id="MQTT_ClientID_value1">
			</td>
			<td style="font-size: 80%;">
				ClientID to connect to the MQTT broker
			</td>
		</tr>
		<tr>
			<td width="20px"  style="padding-left: 40px;">
				<input type="checkbox" id="MQTT_user_enabled" value="1"  onclick = 'InvertEnableItem("MQTT", "user")' unchecked >
			</td>
			<td  width="200px">
				<class id="MQTT_user_text" style="color:black;">user</class>
			</td>
			<td>
				<input type="text" id="MQTT_user_value1">
			</td>
			<td style="font-size: 80%;">
				User for MQTT authentication
			</td>
		</tr>
		<tr>
			<td width="20px"  style="padding-left: 40px;">
				<input type="checkbox" id="MQTT_password_enabled" value="1"  onclick = 'InvertEnableItem("MQTT", "password")' unchecked >
			</td>
			<td  width="200px">
				<class id="MQTT_password_text" style="color:black;">password</class>
			</td>
			<td>
				<input type="text" id="MQTT_password_value1">
			</td>
			<td style="font-size: 80%;">
				Password for MQTT authentication
			</td>
		</tr>
	
		<tr>
			<td colspan="4" style="padding-left: 20px;"><h4>AutoTimer</h4></td>
		</tr> 			
		<tr class="expert"  id="ex13">
			<td width="20px"  style="padding-left: 40px;">
			</td>
			<td  width="200px">
				<class id="AutoTimer_AutoStart_text" style="color:black;">AutoStart</class>
			</td>
			<td>
				<select id="AutoTimer_AutoStart_value1">
					<option value="true" selected>true</option>
					<option value="false" >false</option>
				</select>
			</td>
			<td style="font-size: 80%;">
				Start the image recognition immediatly after power up. false is basically for debugging.
			</td>
		</tr>
		<tr>
			<td width="20px"  style="padding-left: 40px;">
			</td>
			<td  width="200px">
				<class id="AutoTimer_Intervall_text" style="color:black;">Intervall</class>
			</td>
			<td>
				<input type="number" id="AutoTimer_Intervall_value1" size="13" min="3" step="any">
			</td>
			<td style="font-size: 80%;">
				Intervall in which the counter is read (in minutes). Number must be greater than 3 minutes.
			</td>
		</tr>

		<tr>
			<td colspan="4" style="padding-left: 20px;">
				<h4><input type="checkbox" id="Category_GPIO_enabled" value="1"  onclick='UpdateAfterCategoryCheck()' unchecked > 
					GPIO Settings
					<span class="GPIO_item" > - Enabling GPIO handler, disable by default integrated flash light. Please enable it with GPIO4 (internal flash LED) settings or GPIO12 (external LED).</span>
				</h4>	
			</td>
		</tr> 	
		
		<!------------- GPIO0 begin ------------------>
		<tr class="expert" class="GPIO_IO0 GPIO_item">
			<td width="20px"  style="padding-left: 40px;">
				<input type="checkbox" id="GPIO_IO0_enabled" value="1"  onclick = 'InvertEnableItem("GPIO", "IO0")' unchecked>
			</td>
			<td>
				<span id="GPIO_IO0_text">GPIO 0 state</span>
			</td>
			<td>
				<td">
					<select id="GPIO_IO0_value1">
						<option value="input">input</option>
						<option value="input-pullup">input pullup</option>
						<option value="input-pulldown">input pulldown</option>
						<option value="output">output</option>
					</select>
				</td>
			</td>
			<td class="description">
				GPIO 0 Usable with restrictions.<br> 
				<span style="color: red">Must be disabled when camera is used.</span><br>
				<span style="color: red">Pin is used to activate flash mode and must therefore be HIGH when booting.</span>
			</td>
		</tr>
		<tr class="expert" class="GPIO_IO0 GPIO_item">
			<td width="20px"  style="padding-left: 40px;"></td>
			<td>
				<span id="GPIO_IO0_text" class="GPIO_IO0 GPIO_item">GPIO 0 use interrupt</span>
			</td>
			<td>
				<td">
					<select id="GPIO_IO0_value2">
						<option value="disabled">disabled</option>
						<option value="rising-edge">rising edge</option>
						<option value="falling-edge">falling edge</option>
						<option value="rising-and-falling">rising and falling</option>
						<option value="low-level-trigger">low level trigger</option>
						<option value="high-level-trigger">high level trigger</option>
					</select>	
				</td>
			</td>
			<td class="description">
				GPIO 0 enable interrupt trigger
			</td>
		</tr>
		<tr class="expert" class="GPIO_IO0 GPIO_item">
			<td width="20px"  style="padding-left: 40px;"></td>
			<td>
				<span class="GPIO_IO0 GPIO_item">GPIO 0 PWM duty resolution</span>
			</td>
			<td>
				<td"><input type="number" id="GPIO_IO0_value3" min="1" max="20"></td>
			</td>
			<td class="description">
				GPIO 0 LEDC PWM duty resolution in bit
			</td>
		</tr>
		<tr class="expert" class="GPIO_IO0 GPIO_item">
			<td width="20px"  style="padding-left: 40px;"></td>
			<td>
				<span class="GPIO_IO0 GPIO_item">GPIO 0 enable MQTT</span>
			</td>
			<td>
				<td"><input type="checkbox" id="GPIO_IO0_value4"></td>
			</td>
			<td class="description">
				GPIO 0 enable MQTT publishing/subscribing
			</td>
		</tr>
		<tr class="expert" class="GPIO_IO0 GPIO_item">
			<td width="20px"  style="padding-left: 40px;"></td>
			<td>
				<span class="GPIO_IO0 GPIO_item">GPIO 0 enable HTTP</span>
			</td>
			<td>
				<td"><input type="checkbox" id="GPIO_IO0_value5"></td>
			</td>
			<td class="description">
				GPIO 0 enable HTTP write/read
			</td>
		</tr>
		<tr class="expert" class="GPIO_IO0 GPIO_item">
			<td width="20px"  style="padding-left: 40px;"></td>
			<td>
				<span class="GPIO_IO0 GPIO_item">GPIO 0 name</span>
			</td>
			<td>
				<td"><input type="text" id="GPIO_IO0_value6"></td>
			</td>
			<td class="description">
				GPIO 0 MQTT topic name (empty = GPIO0). Allowed characters (a-z, A-Z, 0-9, _, -)
			</td>
		</tr>
		<!------------- GPIO0 end ------------------>

		<!------------- GPIO1 begin ------------------>
		<tr class="expert" class="GPIO_IO1 GPIO_item">
			<td width="20px"  style="padding-left: 40px;">
				<input type="checkbox" id="GPIO_IO1_enabled" value="1"  onclick = 'InvertEnableItem("GPIO", "IO1")' unchecked>
			</td>
			<td>
				<span id="GPIO_IO1_text" class="GPIO_IO1 GPIO_item">GPIO 1 state</span>
			</td>
			<td>
				<td">
					<select id="GPIO_IO1_value1">
						<option value="input">input</option>
						<option value="input-pullup">input pullup</option>
						<option value="input-pulldown">input pulldown</option>
						<option value="output">output</option>
					</select>
				</td>
			</td>
			<td class="description">
				GPIO 1 <br><span style="color: blue">Used by default for serial communication as TX pin.<br>Required for seriales monitor.</span>
			</td>
		</tr>
		<tr class="expert" class="GPIO_IO1 GPIO_item">
			<td width="20px"  style="padding-left: 40px;"></td>
			<td>
				<span class="GPIO_IO1 GPIO_item" class="expert">GPIO 1 use interrupt</span>
			</td>
			<td>
				<td">
					<select id="GPIO_IO1_value2">
						<option value="disabled">disabled</option>
						<option value="rising-edge" disabled>rising edge</option>
						<option value="falling-edge" disabled>falling edge</option>
						<option value="rising-and-falling">rising and falling</option>
						<option value="low-level-trigger">low level trigger</option>
						<option value="high-level-trigger">high level trigger</option>
					</select>	
				</td>
			</td>
			<td class="description">
				GPIO 1 enable interrupt trigger
			</td>
		</tr>
		<tr class="expert" class="GPIO_IO1 GPIO_item">
			<td width="20px"  style="padding-left: 40px;"></td>
			<td>
				<span class="GPIO_IO1 GPIO_item">GPIO 1 PWM duty resolution</span>
			</td>
			<td>
				<td"><input type="number" id="GPIO_IO1_value3" min="1" max="20"></td>
			</td>
			<td class="description">
				GPIO 1 LEDC PWM duty resolution in bit
			</td>
		</tr>
		<tr class="expert" class="GPIO_IO1 GPIO_item">
			<td width="20px"  style="padding-left: 40px;"></td>
			<td>
				<span class="GPIO_IO1 GPIO_item">GPIO 1 enable MQTT</span>
			</td>
			<td>
				<td"><input type="checkbox" id="GPIO_IO1_value4"></td>
			</td>
			<td class="description">
				GPIO 1 enable MQTT publishing/subscribing
			</td>
		</tr>
		<tr class="expert" class="GPIO_IO1 GPIO_item">
			<td width="20px"  style="padding-left: 40px;"></td>
			<td>
				<span class="GPIO_IO1 GPIO_item">GPIO 1 enable HTTP</span>
			</td>
			<td>
				<td"><input type="checkbox" id="GPIO_IO1_value5"></td>
			</td>
			<td class="description">
				GPIO 1 enable HTTP write/read
			</td>
		</tr>
		<tr class="expert" class="GPIO_IO1 GPIO_item">
			<td width="20px"  style="padding-left: 40px;"></td>
			<td>
				<span class="GPIO_IO1 GPIO_item" class="expert">GPIO 1 name</span>
			</td>
			<td>
				<td"><input type="text" id="GPIO_IO1_value6"></td>
			</td>
			<td class="description">
				GPIO 1 MQTT topic name (empty = GPIO1). Allowed characters (a-z, A-Z, 0-9, _, -)
			</td>
		</tr>
		<!------------- GPIO1 end ------------------>

		<!------------- GPIO3 begin ------------------>
		<tr class="expert" class="GPIO_IO3 GPIO_item">
			<td width="20px"  style="padding-left: 40px;">
				<input type="checkbox" id="GPIO_IO3_enabled" value="1"  onclick = 'InvertEnableItem("GPIO", "IO3")' unchecked>
			</td>
			<td>
				<span id="GPIO_IO3_text" class="GPIO_IO3 GPIO_item">GPIO 3 state</span>
			</td>
			<td>
				<td">
					<select id="GPIO_IO3_value1">
						<option value="input">input</option>
						<option value="input-pullup">input pullup</option>
						<option value="input-pulldown">input pulldown</option>
						<option value="output">output</option>
					</select>
				</td>
			</td>
			<td class="description">
				GPIO 3 <span style="color: blue">Used by default for serial communication as RX pin.</span>
			</td>
		</tr>
		<tr class="expert" class="GPIO_IO3 GPIO_item">
			<td width="20px"  style="padding-left: 40px;"></td>
			<td>
				<span class="GPIO_IO3 GPIO_item">GPIO 3 use interrupt</span>
			</td>
			<td>
				<td">
					<select id="GPIO_IO3_value2">
						<option value="disabled">disabled</option>
						<option value="rising-edge" disabled>rising edge</option>
						<option value="falling-edge" disabled>falling edge</option>
						<option value="rising-and-falling">rising and falling</option>
						<option value="low-level-trigger">low level trigger</option>
						<option value="high-level-trigger">high level trigger</option>
					</select>	
				</td>
			</td>
			<td class="description">
				GPIO 3 Used by default for serial communication as RX pin.
			</td>
		</tr>
		<tr class="expert" class="GPIO_IO3 GPIO_item">
			<td width="20px"  style="padding-left: 40px;"></td>
			<td>
				<span class="GPIO_IO3 GPIO_item">GPIO 3 PWM duty resolution</span>
			</td>
			<td>
				<td"><input type="number" id="GPIO_IO3_value3" min="1" max="20"></td>
			</td>
			<td class="description">
				GPIO 3 LEDC PWM duty resolution in bit
			</td>
		</tr>
		<tr class="expert" class="GPIO_IO3 GPIO_item">
			<td width="20px"  style="padding-left: 40px;"></td>
			<td>
				<span class="GPIO_IO3 GPIO_item">GPIO 3 enable MQTT</span>
			</td>
			<td>
				<td"><input type="checkbox" id="GPIO_IO3_value4"></td>
			</td>
			<td class="description">
				GPIO 3 enable MQTT publishing/subscribing
			</td>
		</tr>
		<tr class="expert" class="GPIO_IO3 GPIO_item">
			<td width="20px"  style="padding-left: 40px;"></td>
			<td>
				<span class="GPIO_IO3 GPIO_item">GPIO 3 enable HTTP</span>
			</td>
			<td>
				<td"><input type="checkbox" id="GPIO_IO3_value5"></td>
			</td>
			<td class="description">
				GPIO 3 enable HTTP write/read
			</td>
		</tr>
		<tr class="expert" class="GPIO_IO3 GPIO_item">
			<td width="20px"  style="padding-left: 40px;"></td>
			<td>
				<span class="GPIO_IO3 GPIO_item">GPIO 3 name</span>
			</td>
			<td>
				<td"><input type="text" id="GPIO_IO3_value6"></td>
			</td>
			<td class="description">
				GPIO 3 MQTT topic name (empty = GPIO3). Allowed characters (a-z, A-Z, 0-9, _, -)
			</td>
		</tr>
		<!------------- GPIO3 end ------------------>

		<!------------- GPIO4 begin ------------------>
		<tr class="GPIO_IO4 GPIO_item">
			<td width="20px"  style="padding-left: 40px;">
				<input type="checkbox" id="GPIO_IO4_enabled" value="1"  onclick = 'InvertEnableItem("GPIO", "IO4")' unchecked>
			</td>
			<td>
				<span id="GPIO_IO4_text" class="GPIO_IO4 GPIO_item">GPIO 4 state</span>
			</td>
			<td>
				<td">
					<select id="GPIO_IO4_value1">
						<option value="input">input</option>
						<option value="input-pullup">input pullup</option>
						<option value="input-pulldown">input pulldown</option>
						<option value="output">output</option>
						<option value="built-in-led">built-in led flash light</option>
					</select>
				</td>
			</td>
			<td class="description">
				GPIO 4 Usable with restrictions.<br> 
				<span style="color: red">Pin is used for build-in flash light.</span>
			</td>
		</tr>
		<tr class="expert" class="GPIO_IO4 GPIO_item">
			<td width="20px"  style="padding-left: 40px;"></td>
			<td>
				<span class="GPIO_IO4 GPIO_item">GPIO 4 use interrupt</span>
			</td>
			<td>
				<td">
					<select id="GPIO_IO4_value2">
						<option value="disabled">disabled</option>
						<option value="rising-edge">rising edge</option>
						<option value="falling-edge">falling edge</option>
						<option value="rising-and-falling">rising and falling</option>
						<option value="low-level-trigger">low level trigger</option>
						<option value="high-level-trigger">high level trigger</option>
					</select>	
				</td>
			</td>
			<td class="description">
				GPIO 4 enable interrupt trigger
			</td>
		</tr>
		<tr class="expert" class="GPIO_IO4 GPIO_item">
			<td width="20px"  style="padding-left: 40px;"></td>
			<td>
				<span class="GPIO_IO4 GPIO_item">GPIO 4 PWM duty resolution</span>
			</td>
			<td>
				<td"><input type="number" id="GPIO_IO4_value3" min="1" max="20"></td>
			</td>
			<td class="description">
				GPIO 4 LEDC PWM duty resolution in bit
			</td>
		</tr>
		<tr class="expert" class="GPIO_IO4 GPIO_item">
			<td width="20px"  style="padding-left: 40px;"></td>
			<td>
				<span class="GPIO_IO4 GPIO_item">GPIO 4 enable MQTT</span>
			</td>
			<td>
				<td"><input type="checkbox" id="GPIO_IO4_value4"></td>
			</td>
			<td class="description">
				GPIO 4 enable MQTT publishing/subscribing
			</td>
		</tr>
		<tr class="expert" class="GPIO_IO4 GPIO_item">
			<td width="20px"  style="padding-left: 40px;"></td>
			<td>
				<span class="GPIO_IO4 GPIO_item">GPIO 4 enable HTTP</span>
			</td>
			<td>
				<td"><input type="checkbox" id="GPIO_IO4_value5"></td>
			</td>
			<td class="description">
				GPIO 4 enable HTTP write/read
			</td>
		</tr>
		<tr class="expert" class="GPIO_IO4 GPIO_item">
			<td width="20px"  style="padding-left: 40px;"></td>
			<td>
				<span class="GPIO_IO4 GPIO_item">GPIO 4 name</span>
			</td>
			<td>
				<td"><input type="text" id="GPIO_IO4_value6"></td>
			</td>
			<td class="description">
				GPIO 4 MQTT topic name (empty = GPIO4). Allowed characters (a-z, A-Z, 0-9, _, -)
			</td>
		</tr>
		<!------------- GPIO4 end ------------------>

		<!------------- GPIO12 begin ------------------>
		<tr class="GPIO_IO12 GPIO_item">
			<td width="20px"  style="padding-left: 40px;">
				<input type="checkbox" id="GPIO_IO12_enabled" value="1"  onclick = 'InvertEnableItem("GPIO", "IO12")' unchecked>
			</td>
			<td>
				<span class="GPIO_IO12 GPIO_item" id="GPIO_IO12_text">GPIO 12 state</span>
			</td>
			<td>
				<td">
					<select id="GPIO_IO12_value1">
						<option value="input">input</option>
						<option value="input-pullup">input pullup</option>
						<option value="input-pulldown">input pulldown</option>
						<option value="output">output</option>
						<option value="external-flash-ws281x">external flash light ws281x controlled</option>
					</select>
				</td>
			</td>
			<td class="description">
				GPIO 12 is usable without restrictions
			</td>
		</tr>
		<tr class="expert" class="GPIO_IO12 GPIO_item">
			<td width="20px"  style="padding-left: 40px;"></td>
			<td>
				<span class="GPIO_IO12 GPIO_item">GPIO 12 use interrupt</span>
			</td>
			<td>
				<td>
					<select class="GPIO_IO12 GPIO_item" id="GPIO_IO12_value2">
						<option value="disabled">disabled</option>
						<option value="rising-edge">rising edge</option>
						<option value="falling-edge">falling edge</option>
						<option value="rising-and-falling">rising and falling</option>
						<option value="low-level-trigger">low level trigger</option>
						<option value="high-level-trigger">high level trigger</option>
					</select>	
				</td>
			</td>
			<td class="description">
				GPIO 12 enable interrupt trigger
			</td>
		</tr>
		<tr class="expert" class="GPIO_IO12 GPIO_item">
			<td width="20px"  style="padding-left: 40px;"></td>
			<td>
				<span class="GPIO_IO12 GPIO_item">GPIO 12 PWM duty resolution</span>
			</td>
			<td>
				<td"><input type="number" id="GPIO_IO12_value3" min="1" max="20"></td>
			</td>
			<td class="description">
				GPIO 12 LEDC PWM duty resolution in bit
			</td>
		</tr>
		<tr class="expert" class="GPIO_IO12 GPIO_item">
			<td width="20px"  style="padding-left: 40px;"></td>
			<td>
				<span class="GPIO_IO12 GPIO_item">GPIO 12 enable MQTT</span>
			</td>
			<td>
				<td"><input type="checkbox" id="GPIO_IO12_value4"></td>
			</td>
			<td class="description">
				GPIO 12 enable MQTT publishing/subscribing
			</td>
		</tr>
		<tr class="expert" class="GPIO_IO12 GPIO_item">
			<td width="20px"  style="padding-left: 40px;"></td>
			<td>
				<span class="GPIO_IO12 GPIO_item">GPIO 12 enable HTTP</span>
			</td>
			<td>
				<td"><input type="checkbox" id="GPIO_IO12_value5"></td>
			</td>
			<td class="description">
				GPIO 12 enable HTTP write/read
			</td>
		</tr>
		<tr class="expert" class="GPIO_IO12 GPIO_item">
			<td width="20px"  style="padding-left: 40px;"></td>
			<td>
				<span class="GPIO_IO12 GPIO_item">GPIO 12 name</span>
			</td>
			<td>
				<td"><input type="text" id="GPIO_IO12_value6"></td>
			</td>
			<td class="description">
				GPIO 12 MQTT topic name (empty = GPIO12). Allowed characters (a-z, A-Z, 0-9, _, -)
			</td>
		</tr>

		<tr class="GPIO_IO12 GPIO_item" id="wstypeex3">
			<td width="20px" style="padding-left: 40px;">
			</td>
			<td>
				<span class="GPIO_IO12 GPIO_item" id="GPIO_LEDType_text">LED-Type</span>
			</td>
			<td class="GPIO_IO12 GPIO_item">
				<select class="GPIO_IO12 GPIO_item" id="GPIO_LEDType_value1">
					<option value="WS2812" selected>WS2812</option>
					<option value="WS2812B">WS2812B</option>
					<option value="SK6812">SK6812 (not tested)</option>
					<option value="WS2813">WS2813 (not tested)</option>
				</select>
			</td>
			<td class="description">
				Type of WS2812x, that is connected to GPIO12
			</td>
		</tr>

		<tr  class="GPIO_IO12 GPIO_item" id="LEDANZex8" >
			<td  width="20px"  style="padding-left: 40px;">
			</td>
			<td>
				<span class="GPIO_IO12 GPIO_item" id="GPIO_LEDNumbers_text">Numbers of LEDs</span>
			</td>
			<td>
				<input type="number" name="name" id="GPIO_LEDNumbers_value1" size="13" min="1">
			</td>
			<td style="font-size: 80%;">
				Number of LEDs on the external LED-stripe 
			</td>
		</tr>
		<tr  class="GPIO_IO12 GPIO_item" id="LEDRGBex9">
			<td width="20px"  style="padding-left: 40px;">
			</td>
			<td>
				<span class="GPIO_IO12 GPIO_item"  id="GPIO_LEDColor_text">LED Color</span>
			</td>
			<td  class="GPIO_IO12 GPIO_item">
				R <input class="smallSelect" class="GPIO_IO12 GPIO_item" id="GPIO_LEDColor_value1" size="12">
				G <input class="smallSelect" class="GPIO_IO12 GPIO_item" id="GPIO_LEDColor_value2" size="12">
				B <input class="smallSelect" class="GPIO_IO12 GPIO_item" id="GPIO_LEDColor_value3" size="12">
			</td>
			<td style="font-size: 80%;">
				Color of LEDs in (R)ed, (G)reen (B)lue from 0...255
			</td>
		</tr>


		<!------------- GPIO12 end ------------------>

		<!------------- GPIO13 begin ------------------>
		<tr class="expert" class="GPIO_IO13 GPIO_item">
			<td width="20px"  style="padding-left: 40px;">
				<input type="checkbox" id="GPIO_IO13_enabled" value="1"  onclick = 'InvertEnableItem("GPIO", "IO13")' unchecked>
			</td>
			<td>
				<span id="GPIO_IO13_text">GPIO 13 state</span>
			</td>
			<td>
				<td">
					<select id="GPIO_IO13_value1">
						<option value="input">input</option>
						<option value="input-pullup">input pullup</option>
						<option value="input-pulldown">input pulldown</option>
						<option value="output">output</option>
					</select>
				</td>
			</td>
			<td class="description">
				GPIO 13 is usable without restrictions
			</td>
		</tr>
		<tr class="expert" class="GPIO_IO13 GPIO_item">
			<td width="20px"  style="padding-left: 40px;"></td>
			<td>
				<span class="GPIO_IO13 GPIO_item">GPIO 13 use interrupt</span>
			</td>
			<td>
				<td">
					<select id="GPIO_IO13_value2">
						<option value="disabled">disabled</option>
						<option value="rising-edge" disabled>rising edge</option>
						<option value="falling-edge" disabled>falling edge</option>
						<option value="rising-and-falling">rising and falling</option>
						<option value="low-level-trigger">low level trigger</option>
						<option value="high-level-trigger">high level trigger</option>
					</select>	
				</td>
			</td>
			<td class="description">
				GPIO 13 enable interrupt trigger
			</td>
		</tr>
		<tr class="expert" class="GPIO_IO13 GPIO_item">
			<td width="20px"  style="padding-left: 40px;"></td>
			<td>
				<span class="GPIO_IO13 GPIO_item">GPIO 13 PWM duty resolution</span>
			</td>
			<td>
				<td"><input type="number" id="GPIO_IO13_value3" min="1" max="20"></td>
			</td>
			<td class="description">
				GPIO 13 LEDC PWM duty resolution in bit
			</td>
		</tr>
		<tr class="expert" class="GPIO_IO13 GPIO_item">
			<td width="20px"  style="padding-left: 40px;"></td>
			<td>
				<span class="GPIO_IO13 GPIO_item">GPIO 13 enable MQTT</span>
			</td>
			<td>
				<td"><input type="checkbox" id="GPIO_IO13_value4"></td>
			</td>
			<td class="description">
				GPIO 13 enable MQTT publishing/subscribing
			</td>
		</tr>
		<tr class="expert" class="GPIO_IO13 GPIO_item">
			<td width="20px"  style="padding-left: 40px;"></td>
			<td>
				<span class="GPIO_IO13 GPIO_item">GPIO 13 enable HTTP</span>
			</td>
			<td>
				<td"><input type="checkbox" id="GPIO_IO13_value5"></td>
			</td>
			<td class="description">
				GPIO 13 enable HTTP write/read
			</td>
		</tr>
		<tr class="expert" class="GPIO_IO13 GPIO_item">
			<td width="20px"  style="padding-left: 40px;"></td>
			<td>
				<span class="GPIO_IO13 GPIO_item">GPIO 13 name</span>
			</td>
			<td>
				<td"><input type="text" id="GPIO_IO13_value6"></td>
			</td>
			<td class="description">
				GPIO 13 MQTT topic name (empty = GPIO13). Allowed characters (a-z, A-Z, 0-9, _, -)
			</td>
		</tr>
		<!------------- GPIO13 end ------------------>

		<tr>
			<td colspan="4" style="padding-left: 20px;"><h4>Debug</h4></td>
		</tr> 		
		<tr>
			<td width="20px"  style="padding-left: 40px;">
				<input type="checkbox" id="Debug_Logfile_enabled" value="1"  onclick = 'InvertEnableItem("Debug", "Logfile")' unchecked >
			</td>
			<td  width="200px">
				<class id="Debug_Logfile_text" style="color:black;">Logfile</class>
			</td>
			<td>
				<select id="Debug_Logfile_value1">
					<option value="true" selected>true</option>
					<option value="false" >false</option>
				</select>
			</td>
			<td class="description">
				Turn on/off the extended logging
			</td>
		</tr>
		<tr>
			<td width="20px"  style="padding-left: 40px;">
				<td"><input type="checkbox" id="Debug_LogfileRetentionInDays_enabled" value="1"  onclick = 'InvertEnableItem("Debug", "LogfileRetentionInDays")' unchecked ></td>
			</td>
			<td>
				<class id="Debug_LogfileRetentionInDays_text" style="color:black;">LogfileRetentionInDays</class>
			</td>
			<td>
				<input type="number" id="Debug_LogfileRetentionInDays_value1" size="13"  min="0" step="1">
			</td>
			<td class="description">
				Time to keep the log files (in days - "0" = forever)
			</td>
		</tr>

		<tr>
			<td colspan="4" style="padding-left: 20px;"><h4>System</h4></td>
		</tr> 	
		<tr>
			<td width="20px"  style="padding-left: 40px;">
				<td"><input type="checkbox" id="System_TimeZone_enabled" value="1"  onclick = 'InvertEnableItem("System", "TimeZone")' unchecked ></td>
			</td>
			<td>
				<class id="System_TimeZone_text" style="color:black;">TimeZone</class>
			</td>
			<td>
				<input type="text" id="System_TimeZone_value1">
			</td>
			<td class="description">
				Time zone in POSIX syntax (Europe/Berlin = "CET-1CEST,M3.5.0,M10.5.0/3" - incl. daylight saving)
			</td>
		</tr>
		<tr class="expert"  id="ex16">
			<td width="20px"  style="padding-left: 40px;">
				<td"><input type="checkbox" id="System_TimeServer_enabled" value="1"  onclick = 'InvertEnableItem("System", "TimeServer")' unchecked ></td>
			</td>
			<td>
				<class id="System_TimeServer_text" style="color:black;">TimeServer</class>
			</td>
			<td>
				<input type="text" id="System_TimeServer_value1">
			</td>
			<td class="description">
				Time server to synchronize system time (default: "pool.ntp.org" - used if nothing is specified)
			</td>
		</tr>
		<tr class="expert"  id="System_Hostname">
			<td width="20px"  style="padding-left: 40px;">
				<td"><input type="checkbox" id="System_Hostname_enabled" value="1"  onclick = 'InvertEnableItem("System", "Hostname")' unchecked ></td>
			</td>
			<td>
				<class id="System_Hostname_text" style="color:black;">Hostname</class>
			</td>
			<td>
				<input type="text" id="System_Hostname_value1">
			</td>
			<td class="description">
				Hostname for server - will be transfered to wlan.ini at next startup)
			</td>
		</tr>

	</table>

	<p>
		<button class="button" onclick="saveTextAsFile()">Update Config.ini</button>
	</p>
	<p>
		
	</p>
	<div id="doreboot">
		<p>
			<button class="button" id="Edit_Config_Direct" onclick="editConfigDirect()" style="display:none">Edit Config.ini direct</button>
			
			<button class="button" id="reboot" type="button" onclick="doReboot()">Reboot to activate updates</button>
		</p>
	</div>

</div>

<script type="text/javascript" src="./gethost.js"></script> 
<script type="text/javascript" src="./readconfigcommon.js"></script>  
<script type="text/javascript" src="./readconfigparam.js"></script>  
 
<script type="text/javascript">
	var canvas = document.getElementById('canvas'),
		basepath = "http://192.168.178.22"; 
		param;
		category;
		NUNBERSAkt = -1;
		NUMBERS;


function LoadConfigNeu() {
	var isInitialSetup = getParameterByName('InitialSetup');
	if (isInitialSetup === 'true')
	{
		document.getElementById("reboot").style.display = "none";
	}


	basepath = getbasepath(); 
	if (!loadConfig(basepath)) {
		alert("Config.ini could not be loaded!\nPlease reload the page.");
		return;
	} 
	ParseConfig();	
	param = getConfigParameters();
	category = getConfigCategory();
	InitIndivParameter();

	UpdateInput();
	UpdateInputIndividual();
	UpdateExpertModus();
	document.getElementById("divall").style.display = ''; 
}

function InitIndivParameter()
{
	NUMBERS = getNUMBERInfo();

    var _index = document.getElementById("Numbers_value1");
    while (_index.length)
        _index.remove(0);

    for (var i = 0; i < NUMBERS.length; ++i){
        var option = document.createElement("option");
        option.text = NUMBERS[i]["name"];
        option.value = i;
        _index.add(option);
        }
    _index.selectedIndex = 0; 
}


function getParameterByName(name, url = window.location.href) {
    name = name.replace(/[\[\]]/g, '\\$&');
    var regex = new RegExp('[?&]' + name + '(=([^&#]*)|&|#|$)'),
        results = regex.exec(url);

	if (!results) return null;
    if (!results[2]) return '';
	return decodeURIComponent(results[2].replace(/\+/g, ' '));
}	

function WriteParameter(_param, _category, _cat, _name, _optional, _number = -1){

	let anzpara = _param[_cat][_name].anzParam;		

	if (_number > -1) {
		if ((NUMBERS[_number] == undefined) || (NUMBERS[_number][_cat] == undefined) ||  (NUMBERS[_number][_cat][_name] == undefined))
			return;

		if (_optional) {
			document.getElementById(_cat+"_"+_name+"_enabled").checked = NUMBERS[_number][_cat][_name]["enabled"];
			for (var j = 1; j <= anzpara; ++j) {
				document.getElementById(_cat+"_"+_name+"_value"+j).disabled = !NUMBERS[_number][_cat][_name]["enabled"];	
			}		
		}
		document.getElementById(_cat+"_"+_name+"_text").style="color:black;"
		setEnabled(_cat+"_"+_name, true);

		for (var j = 1; j <= anzpara; ++j) {
			let element = document.getElementById(_cat+"_"+_name+"_value"+j);
			if (element.tagName.toLowerCase() == "select") {
				var textToFind = NUMBERS[_number][_cat][_name]["value"+j];
				if (textToFind == undefined)
					continue;

				_isFound = false;
				element.selectedIndex = -1;
				for (var i = 0; i < element.options.length; i++) {
					if (element.options[i].value.toLowerCase() === textToFind.toLowerCase()) {
						element.selectedIndex = i;
						_isFound = true;
						break;
					}
				}
				if (!_isFound)
				{
					_zw_txt = "In the selectd field the value '" + textToFind + "' in the parameter '";
					_zw_txt = _zw_txt + _cat + "' in the field '" + _name + "' is invalid.\nPLEASE CHECK BEFORE SAVING!";
					alert(_zw_txt);
				}
			}
			else if ((element.getAttribute("type") != null) && (element.getAttribute("type").toLowerCase() == "checkbox")) {
				element.checked = NUMBERS[_number][_cat][_name]["value"+j] == "true";
			}
			else {
				element.value = NUMBERS[_number][_cat][_name]["value"+j];
			}
		}
	}
	else {
		if (_optional) {
			document.getElementById(_cat+"_"+_name+"_enabled").checked = _param[_cat][_name]["enabled"];
			for (var j = 1; j <= anzpara; ++j) {
				document.getElementById(_cat+"_"+_name+"_value"+j).disabled = !_param[_cat][_name]["enabled"];	
			}		
		}
		document.getElementById(_cat+"_"+_name+"_text").style="color:black;"
		setEnabled(_cat+"_"+_name, true);

		for (var j = 1; j <= anzpara; ++j) {
			let element = document.getElementById(_cat+"_"+_name+"_value"+j);
			if (element.tagName.toLowerCase() == "select") {
				var textToFind = _param[_cat][_name]["value"+j];
				if (textToFind == undefined)
					continue;
				
				_isFound = false;
				element.selectedIndex = -1;
				for (var i = 0; i < element.options.length; i++) {
					if (element.options[i].value.toLowerCase() === textToFind.toLowerCase()) {
						element.selectedIndex = i;
						_isFound = true;
						break;
					}
				}
				if (!_isFound)
				{
					_zw_txt = "In the selectd field the value '" + textToFind + "' in the section '";
					_zw_txt = _zw_txt + _cat + "' in the field '" + _name + "' is invalid.\nPLEASE CHECK BEFORE SAVING!";
					alert(_zw_txt);
				}

			}
			else if ((element.getAttribute("type") != null) && (element.getAttribute("type").toLowerCase() == "checkbox")) {
				element.checked = _param[_cat][_name]["value"+j] == "true";
			}
			else {
				element.value = _param[_cat][_name]["value"+j];
			}
		}	
	}

	///////////////// am Ende, falls Kategorie als gesamtes nicht ausgewählt --> deaktivieren
	if (_category[_cat]["enabled"] == false) 
	{
		if (_optional) {
			document.getElementById(_cat+"_"+_name+"_enabled").disabled = true;	
			for (var j = 1; j <= anzpara; ++j) {
				document.getElementById(_cat+"_"+_name+"_value"+j).disabled = true;	
			}	
		}
		document.getElementById(_cat+"_"+_name+"_text").style="color:lightgrey;"		
		setEnabled(_cat+"_"+_name, false);
	}

	EnDisableItem(_category[_cat]["enabled"], _param, _category, _cat, _name, _optional, _number);
}

function InvertEnableItem(_cat, _param)
{
	_zw = _cat + "_" + _param + "_enabled";
	_isOn = document.getElementById(_zw).checked;

	_color = "color:lightgrey;";
	if (_isOn) {
		_color = "color:black;";
	}

	_zw = _cat + "_" + _param + "_text";
	document.getElementById(_zw).disabled = !_isOn;
	document.getElementById(_zw).style = _color;

	setEnabled(_cat + "_" + _param, _isOn);

	for (var j = 1; j <= param[_cat][_param]["anzParam"]; ++j) {
			document.getElementById(_cat+"_"+_param+"_value"+j).disabled = !_isOn;	
			document.getElementById(_cat+"_"+_param+"_value"+j).style=_color;	
	}
}

function setEnabled(className, enabled) {
	_color = "color:lightgrey;";
	if (enabled) {
		_color = "color:black;";
	}

	let elements = document.getElementsByClassName(className);
	for (i = 0; i < elements.length; i++) {
		if (enabled) {
			elements[i].classList.remove("disabled");
		} else {
			elements[i].classList.add("disabled");
		}

		let inputs = elements[i].getElementsByTagName("input");
		for (j = 0; j < inputs.length; j++) {
			if (inputs[j].id.endsWith("_enabled"))
				continue;

			inputs[j].style = _color
			if (enabled) {
				inputs[j].removeAttribute("disabled");
			} else {
				inputs[j].setAttribute("disabled", "disabled");
			}
		}
	}
}

function setVisible(className, visible) {
	let elements = document.getElementsByClassName(className);
	for (i = 0; i < elements.length; i++) {
		if (visible) {
			elements[i].classList.remove("hidden");
		} else {
			elements[i].classList.add("hidden");
		}
	}
}

function EnDisableItem(_status, _param, _category, _cat, _name, _optional, _number = -1)
{
	_status = _category[_cat]["enabled"];

	_color = "color:lightgrey;";
	if (_status) {
		_color = "color:black;";
	}

	if (_optional) {
		document.getElementById(_cat+"_"+_name+"_enabled").disabled = !_status;
		document.getElementById(_cat+"_"+_name+"_enabled").style=_color;	
	}

	if (_number == -1){
		if (!_param[_cat][_name]["enabled"]) {
			_status = false;
			_color = "color:lightgrey;";
		}
	}
	else
		if (!NUMBERS[_number][_cat][_name]["enabled"]) {
				_status = false;
				_color = "color:lightgrey;";
			}


	document.getElementById(_cat+"_"+_name+"_text").disabled = !_status;
	document.getElementById(_cat+"_"+_name+"_text").style = _color;

	setEnabled(_cat+"_"+_name, _status);

	for (var j = 1; j <= _param[_cat][_name]["anzParam"]; ++j) {
			document.getElementById(_cat+"_"+_name+"_value"+j).disabled = !_status;	
			document.getElementById(_cat+"_"+_name+"_value"+j).style=_color;	
	}
}


function ReadParameter(_param, _cat, _name, _optional, _number = -1){
	if (_number > -1) {
		if (_cat == "Digits")
			_cat = "digit";
		if (_cat == "Analog")
			_cat = "analog";

		if ((NUMBERS[_number] == undefined) || (NUMBERS[_number][_cat] == undefined) ||  (NUMBERS[_number][_cat][_name] == undefined))
			return;


		if (_optional) {
			NUMBERS[_number][_cat][_name]["enabled"] = document.getElementById(_cat+"_"+_name+"_enabled").checked;			
		}

		for (var j = 1; j <= _param[_cat][_name]["anzParam"]; ++j) {
			let element = document.getElementById(_cat+"_"+_name+"_value"+j);
			if (element.tagName.toLowerCase() == "select") {
				NUMBERS[_number][_cat][_name]["value"+j] = element.selectedIndex > -1 ? element.options[element.selectedIndex].value : "";
			}
			else if ((element.getAttribute("type") != null) && (element.getAttribute("type").toLowerCase() == "checkbox")) {
				NUMBERS[_number][_cat][_name]["value"+j] = element.checked;
			}
			else {
				if ((NUMBERS[_number][_cat][_name].checkRegExList != null) && (NUMBERS[_number][_cat][_name].checkRegExList[j-1] != null)) {
					if (!element.value.match(NUMBERS[_cat][_name].checkRegExList[j-1])) {
						element.classList.add("invalid-input");
					} else {
						element.classList.remove("invalid-input");
					}
				}
				NUMBERS[_number][_cat][_name]["value"+j] = element.value;	
			}
		}
	}
	else
	{
		if (_optional) {
			_param[_cat][_name]["enabled"] = document.getElementById(_cat+"_"+_name+"_enabled").checked;			
		}

		for (var j = 1; j <= _param[_cat][_name]["anzParam"]; ++j) {
			let element = document.getElementById(_cat+"_"+_name+"_value"+j);
			if (element.tagName.toLowerCase() == "select") {
				_param[_cat][_name]["value"+j] = element.selectedIndex > -1 ? element.options[element.selectedIndex].value : "";
			}
			else if ((element.getAttribute("type") != null) && (element.getAttribute("type").toLowerCase() == "checkbox")) {
				_param[_cat][_name]["value"+j] = element.checked;
			}
			else {
				if ((_param[_cat][_name].checkRegExList != null) && (_param[_cat][_name].checkRegExList[j-1] != null)) {
					if (!element.value.match(_param[_cat][_name].checkRegExList[j-1])) {
						element.classList.add("invalid-input");
					} else {
						element.classList.remove("invalid-input");
					}
				}
				_param[_cat][_name]["value"+j] = element.value;	
			}
		}		
	}
}

function UpdateInputIndividual()
{
	if (NUNBERSAkt != -1)
	{
		ReadParameter(param, "PostProcessing", "DecimalShift", true, NUNBERSAkt)		
		ReadParameter(param, "PostProcessing", "MaxRateValue", true, NUNBERSAkt)		
		ReadParameter(param, "PostProcessing", "MaxRateType", true, NUNBERSAkt)		
		ReadParameter(param, "PostProcessing", "ExtendedResolution", true, NUNBERSAkt)		
		ReadParameter(param, "PostProcessing", "IgnoreLeadingNaN", true, NUNBERSAkt)		
	}

	var sel = document.getElementById("Numbers_value1");
	NUNBERSAkt = sel.selectedIndex;
	WriteParameter(param, category, "PostProcessing", "DecimalShift", true, NUNBERSAkt);
	WriteParameter(param, category, "PostProcessing", "MaxRateValue", true, NUNBERSAkt);
	WriteParameter(param, category, "PostProcessing", "MaxRateType", true, NUNBERSAkt);
	WriteParameter(param, category, "PostProcessing", "ExtendedResolution", true, NUNBERSAkt);
	WriteParameter(param, category, "PostProcessing", "IgnoreLeadingNaN", true, NUNBERSAkt);
}

function UpdateInput() {
	document.getElementById("Category_Analog_enabled").checked = category["Analog"]["enabled"];
	document.getElementById("Category_Digits_enabled").checked = category["Digits"]["enabled"];
	document.getElementById("Category_MQTT_enabled").checked = category["MQTT"]["enabled"];
	document.getElementById("Category_GPIO_enabled").checked = category["GPIO"]["enabled"];
	setVisible("GPIO_item", category["GPIO"]["enabled"]);

	WriteParameter(param, category, "MakeImage", "LogImageLocation", true);
	WriteParameter(param, category, "MakeImage", "LogfileRetentionInDays", true);
	WriteParameter(param, category, "MakeImage", "WaitBeforeTakingPicture", false);		
	WriteParameter(param, category, "MakeImage", "ImageQuality", false);		
	WriteParameter(param, category, "MakeImage", "Brightness", false);		
	WriteParameter(param, category, "MakeImage", "Contrast", false);		
	WriteParameter(param, category, "MakeImage", "Saturation", false);		
	WriteParameter(param, category, "MakeImage", "LEDIntensity", false);		
	WriteParameter(param, category, "MakeImage", "ImageSize", false);		
	WriteParameter(param, category, "MakeImage", "FixedExposure", false);		

	WriteParameter(param, category, "Alignment", "SearchFieldX", false);		
	WriteParameter(param, category, "Alignment", "SearchFieldY", false);		
	WriteParameter(param, category, "Alignment", "AlignmentAlgo", true);		

//	WriteParameter(param, category, "Digits", "Model", false);		
	WriteParameter(param, category, "Digits", "LogImageLocation", true);		
	WriteParameter(param, category, "Digits", "LogfileRetentionInDays", true);		
	WriteParameter(param, category, "Digits", "ModelInputSize", false);	
	
//	WriteParameter(param, category, "Analog", "Model", false);		
	WriteParameter(param, category, "Analog", "LogImageLocation", true);		
	WriteParameter(param, category, "Analog", "LogfileRetentionInDays", true);		
//	WriteParameter(param, category, "Analog", "ExtendedResolution", true);		
	WriteParameter(param, category, "Analog", "ModelInputSize", false);		
	
	WriteParameter(param, category, "PostProcessing", "PreValueUse", true);		
	WriteParameter(param, category, "PostProcessing", "PreValueAgeStartup", true);		
	WriteParameter(param, category, "PostProcessing", "AllowNegativeRates", true);
//	WriteParameter(param, category, "PostProcessing", "MaxRateValue", true);		
	WriteParameter(param, category, "PostProcessing", "ErrorMessage", true);
	WriteParameter(param, category, "PostProcessing", "CheckDigitIncreaseConsistency", true);

	WriteParameter(param, category, "MQTT", "Uri", true);	
	WriteParameter(param, category, "MQTT", "MainTopic", true);	
	WriteParameter(param, category, "MQTT", "ClientID", true);	
	WriteParameter(param, category, "MQTT", "user", true);	
	WriteParameter(param, category, "MQTT", "password", true);
	
	WriteParameter(param, category, "GPIO", "IO0", true);
	WriteParameter(param, category, "GPIO", "IO1", true);
	WriteParameter(param, category, "GPIO", "IO3", true);
	WriteParameter(param, category, "GPIO", "IO4", true);
	WriteParameter(param, category, "GPIO", "IO12", true);
	WriteParameter(param, category, "GPIO", "IO13", true);
	WriteParameter(param, category, "GPIO", "LEDType", false);
	WriteParameter(param, category, "GPIO", "LEDNumbers", false);
	WriteParameter(param, category, "GPIO", "LEDColor", false);

	WriteParameter(param, category, "AutoTimer", "AutoStart", false);	
	WriteParameter(param, category, "AutoTimer", "Intervall", false);	

	WriteParameter(param, category, "Debug", "Logfile", true);	
	WriteParameter(param, category, "Debug", "LogfileRetentionInDays", true);	

	WriteParameter(param, category, "System", "TimeZone", true);	
	WriteParameter(param, category, "System", "Hostname", true);	
	WriteParameter(param, category, "System", "TimeServer", true);

	WriteModelFiles();
}

function WriteModelFiles()
{
	list_tflite = getTFLITEList();

    var _index1 = document.getElementById("Digits_Model_value1");
    var _index2 = document.getElementById("Analog_Model_value1");
    while (_index1.length)
        _index1.remove(0);
	while (_index2.length)
        _index2.remove(0);

    for (var i = 0; i < list_tflite.length; ++i){
        var option1 = document.createElement("option");
        var option2 = document.createElement("option");
        option1.text = list_tflite[i];
        option1.value = list_tflite[i];
        option2.text = list_tflite[i];
        option2.value = list_tflite[i];
        _index1.add(option1);
        _index2.add(option2);
        }

	WriteParameter(param, category, "Analog", "Model", false);		
	WriteParameter(param, category, "Digits", "Model", false);		
}

function ReadParameterAll()
{
	category["Analog"]["enabled"] = document.getElementById("Category_Analog_enabled").checked;
	category["Digits"]["enabled"] = document.getElementById("Category_Digits_enabled").checked;
	category["MQTT"]["enabled"] = document.getElementById("Category_MQTT_enabled").checked;
	category["GPIO"]["enabled"] = document.getElementById("Category_GPIO_enabled").checked;
	
	ReadParameter(param, "MakeImage", "LogImageLocation", true);
	ReadParameter(param, "MakeImage", "LogfileRetentionInDays", true);
	ReadParameter(param, "MakeImage", "WaitBeforeTakingPicture", false);		
	ReadParameter(param, "MakeImage", "ImageQuality", false);		
	ReadParameter(param, "MakeImage", "Brightness", false);		
	ReadParameter(param, "MakeImage", "Contrast", false);		
	ReadParameter(param, "MakeImage", "Saturation", false);		
	ReadParameter(param, "MakeImage", "LEDIntensity", false);		
	ReadParameter(param, "MakeImage", "ImageSize", false);	
	ReadParameter(param, "MakeImage", "FixedExposure", false);	

	ReadParameter(param, "Alignment", "SearchFieldX", false);		
	ReadParameter(param, "Alignment", "SearchFieldY", false);
	ReadParameter(param, "Alignment", "AlignmentAlgo", true);

	ReadParameter(param, "Digits", "Model", false);		
	ReadParameter(param, "Digits", "LogImageLocation", true);		
	ReadParameter(param, "Digits", "LogfileRetentionInDays", true);		
	ReadParameter(param, "Digits", "ModelInputSize", false);

	ReadParameter(param, "Analog", "Model", false);		
	ReadParameter(param, "Analog", "LogImageLocation", true);		
	ReadParameter(param, "Analog", "LogfileRetentionInDays", true);		
	ReadParameter(param, "Analog", "ModelInputSize", false);

	ReadParameter(param, "PostProcessing", "PreValueUse", true);		
	ReadParameter(param, "PostProcessing", "PreValueAgeStartup", true);		
	ReadParameter(param, "PostProcessing", "AllowNegativeRates", true);
	ReadParameter(param, "PostProcessing", "ErrorMessage", true);
	ReadParameter(param, "PostProcessing", "CheckDigitIncreaseConsistency", true);

	ReadParameter(param, "MQTT", "Uri", true);	
	ReadParameter(param, "MQTT", "MainTopic", true);	
	ReadParameter(param, "MQTT", "ClientID", true);	
	ReadParameter(param, "MQTT", "user", true);	
	ReadParameter(param, "MQTT", "password", true);	

	ReadParameter(param, "GPIO", "IO0", true);
	ReadParameter(param, "GPIO", "IO1", true);
	ReadParameter(param, "GPIO", "IO3", true);
	ReadParameter(param, "GPIO", "IO4", true);
	ReadParameter(param, "GPIO", "IO12", true);
	ReadParameter(param, "GPIO", "IO13", true);
	ReadParameter(param, "GPIO", "LEDType", false);
	ReadParameter(param, "GPIO", "LEDNumbers", false);
	ReadParameter(param, "GPIO", "LEDColor", false);
	// Folgende Zeilen sind für Abwärtskompatibität < v9.0.0 notwendig (manchmal parameter auskommentiert)
	param["GPIO"]["LEDType"]["enabled"] = true;
	param["GPIO"]["LEDNumbers"]["enabled"] = true;
	param["GPIO"]["LEDColor"]["enabled"] = true;
	param["GPIO"]["LEDType"]["found"] = true;
	param["GPIO"]["LEDNumbers"]["found"] = true;
	param["GPIO"]["LEDColor"]["found"] = true;

	ReadParameter(param, "AutoTimer", "AutoStart", false);	
	ReadParameter(param, "AutoTimer", "Intervall", false);	

	ReadParameter(param, "Debug", "Logfile", true);	
	ReadParameter(param, "Debug", "LogfileRetentionInDays", true);	

	ReadParameter(param, "System", "TimeZone", true);	
	ReadParameter(param, "System", "Hostname", true);	
	ReadParameter(param, "System", "TimeServer", true);	

	UpdateInputIndividual();
	
//	FormatDecimalValue(param, "PostProcessing", "MaxRateValue");
}


function FormatDecimalValue(_param, _cat, _name) {
	for (var j = 1; j <= _param[_cat][_name]["anzParam"]; ++j) {
		var _val = _param[_cat][_name]["value"+j];
		_val = _val.replace(",", ".");
		_param[_cat][_name]["value"+j] = _val;
	}
}

function UpdateAfterCategoryCheck() {
	ReadParameterAll();
	category["Analog"]["enabled"] = document.getElementById("Category_Analog_enabled").checked;
	category["Digits"]["enabled"] = document.getElementById("Category_Digits_enabled").checked;
	category["MQTT"]["enabled"] = document.getElementById("Category_MQTT_enabled").checked;
	UpdateInput();
	UpdateInputIndividual();
}

function UpdateExpertModus()
{
//	var _style = 'display:none;';
	var _style_pur = 'none';
	var _hidden = true;
	if (document.getElementById("ExpertModus_enabled").checked) {
//		_style = '';
		_style_pur = '';
		_hidden = false;
		document.getElementById("Edit_Config_Direct").style.display = ""; 
	}
	else
	{
		document.getElementById("Edit_Config_Direct").style.display = "none"; 
	}

	const expert = document.querySelectorAll(".expert");
	for (var i = 0; i < expert.length; i++) {
		expert[i].style.display = _style_pur;
//		document.getElementById(expert[i].id).style = _style;
	}


	// Enable / Disable die Optionen in den Menues für die Auswahl. Falls kein Expertenmodus soll nur ein Wert (built-in-led oder externan-flash-ws281x) möglich sein
	Array.from(document.querySelector("#GPIO_IO4_value1").options).forEach(function(option_element) {
		if (option_element.value != "built-in-led")
			option_element.hidden = _hidden;
	});	

	Array.from(document.querySelector("#GPIO_IO12_value1").options).forEach(function(option_element) {
		if (option_element.value != "external-flash-ws281x")
			option_element.hidden = _hidden;
	});	

}

function saveTextAsFile()
{
	ReadParameterAll();
	if (document.getElementsByClassName("invalid-input").length > 0) {
		alert("Settings cannot be saved. Please check your entries.");
		return;
	}

	if (confirm("Are you sure you want to update \"config.ini\"?")) {
		ReadParameterAll();
		WriteConfigININew();
	    SaveConfigToServer(basepath);
		alert("Config.ini is updated!")
	}
}

function doReboot() {
	if (confirm("Are you sure you want to reboot the ESP32?")) {
		var stringota = "/reboot";
		window.location = stringota;
		window.location.href = stringota;
		window.location.assign(stringota);
		window.location.replace(stringota);
	}
}

function editConfigDirect() {
	if (confirm("Did you save your changes?")) {
		var stringota = "/edit_config.html";
		window.location = stringota;
		window.location.href = stringota;
		window.location.assign(stringota);
		window.location.replace(stringota);
	}	
}

function numberChanged()
{
	UpdateInputIndividual();
}
 
LoadConfigNeu();
 
</script>
 
</body>
</html>