AI-on-the-edge-device/code/sdkconfig.esp32s3-eth-v2.defaults

##################################################
# Application and board specific configuration
# Edit this file instead of sdkconfig.{board_type}!
# After editing make sure to explicitly delete
# sdkconfig.{board_type} to apply your changes!
##################################################

CONFIG_IDF_TARGET_ARCH_XTENSA=y
CONFIG_IDF_TARGET_ARCH="xtensa"
CONFIG_IDF_TARGET_ESP32S3=y
CONFIG_IDF_TARGET="esp32s3"

#
# SDMMC
#
CONFIG_SOC_SDMMC_USE_GPIO_MATRIX=y

# Enable lwIP IRAM optimization
CONFIG_LWIP_IRAM_OPTIMIZATION=y

# Enable Ethernet IRAM optimization
CONFIG_ETH_IRAM_OPTIMIZATION=y

#
# Serial flasher config
#
# CONFIG_ESPTOOLPY_NO_STUB is not set
# CONFIG_ESPTOOLPY_OCT_FLASH is not set
CONFIG_ESPTOOLPY_FLASH_MODE_AUTO_DETECT=y
CONFIG_ESPTOOLPY_FLASH_SAMPLE_MODE_STR=y
CONFIG_ESPTOOLPY_FLASHMODE_QIO=y
# CONFIG_ESPTOOLPY_FLASHMODE_QOUT=y
# CONFIG_ESPTOOLPY_FLASHMODE_DIO=y
# CONFIG_ESPTOOLPY_FLASHMODE_DOUT=y
CONFIG_ESPTOOLPY_FLASHMODE="qio"
# CONFIG_ESPTOOLPY_FLASHFREQ_40M=y
# CONFIG_ESPTOOLPY_FLASHFREQ_40M_DEFAULT=y
# CONFIG_ESPTOOLPY_FLASHFREQ="40m"
CONFIG_ESPTOOLPY_FLASHFREQ_80M=y
CONFIG_ESPTOOLPY_FLASHFREQ_80M_DEFAULT=y
CONFIG_ESPTOOLPY_FLASHFREQ="80m"
# CONFIG_ESPTOOLPY_FLASHSIZE_4MB=y
# CONFIG_ESPTOOLPY_FLASHSIZE="4MB"
# CONFIG_ESPTOOLPY_FLASHSIZE_8MB=y
# CONFIG_ESPTOOLPY_FLASHSIZE="8MB"
CONFIG_ESPTOOLPY_FLASHSIZE_16MB=y
CONFIG_ESPTOOLPY_FLASHSIZE="16MB"
CONFIG_ESPTOOLPY_FLASHSIZE_DETECT=y

CONFIG_SOC_MEMSPI_SRC_FREQ_80M_SUPPORTED=y
CONFIG_SOC_MEMSPI_SRC_FREQ_40M_SUPPORTED=y
CONFIG_SOC_MEMSPI_SRC_FREQ_20M_SUPPORTED=y
CONFIG_SOC_SPIRAM_SUPPORTED=y

#
# Partition Table
#
# CONFIG_PARTITION_TABLE_SINGLE_APP is not set
# CONFIG_PARTITION_TABLE_SINGLE_APP_LARGE is not set
# CONFIG_PARTITION_TABLE_TWO_OTA=y
CONFIG_PARTITION_TABLE_CUSTOM=y
CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions_custom_16mb.csv"
CONFIG_PARTITION_TABLE_FILENAME="partitions_custom_16mb.csv"
CONFIG_PARTITION_TABLE_OFFSET=0x8000
CONFIG_PARTITION_TABLE_MD5=y

#
# ESP PSRAM
#
CONFIG_SPIRAM=y

#
# SPI configuration
#
CONFIG_SPI_MASTER_IN_IRAM=y
CONFIG_SPI_MASTER_ISR_IN_IRAM=y
CONFIG_SPI_SLAVE_IN_IRAM=y
CONFIG_SPI_SLAVE_ISR_IN_IRAM=y

#
# SPI RAM config
#
# CONFIG_SPIRAM_MODE_QUAD is not set
CONFIG_SPIRAM_MODE_OCT=y
CONFIG_SPIRAM_TYPE_AUTO=y
CONFIG_SPIRAM_ALLOW_STACK_EXTERNAL_MEMORY=y
# CONFIG_SPIRAM_SPEED_40M=y
# CONFIG_SPIRAM_SPEED=40
CONFIG_SPIRAM_SPEED_80M=y
CONFIG_SPIRAM_SPEED=80
CONFIG_SPIRAM_BOOT_INIT=y
CONFIG_SPIRAM_USE_MALLOC=y
CONFIG_SPIRAM_MEMTEST=y
CONFIG_SPIRAM_MALLOC_ALWAYSINTERNAL=16384
CONFIG_SPIRAM_TRY_ALLOCATE_WIFI_LWIP=y
CONFIG_SPIRAM_MALLOC_RESERVE_INTERNAL=131072
CONFIG_SPIRAM_ALLOW_BSS_SEG_EXTERNAL_MEMORY=y

CONFIG_ESP_ROM_HAS_SPI_FLASH=y
CONFIG_SOC_SPI_FLASH_SUPPORTED=y
CONFIG_ESP32S3_SPIRAM_SUPPORT=y
CONFIG_SOC_SPI_MEM_SUPPORT_OPI_MODE=y

#
# Cache config
#
CONFIG_ESP32S3_INSTRUCTION_CACHE_32KB=y
# CONFIG_ESP32S3_INSTRUCTION_CACHE_SIZE=0x4000
CONFIG_ESP32S3_INSTRUCTION_CACHE_8WAYS=y
CONFIG_ESP32S3_ICACHE_ASSOCIATED_WAYS=8
CONFIG_ESP32S3_INSTRUCTION_CACHE_LINE_32B=y
CONFIG_ESP32S3_INSTRUCTION_CACHE_LINE_SIZE=32
CONFIG_ESP32S3_DATA_CACHE_64KB=y
# CONFIG_ESP32S3_DATA_CACHE_SIZE=0x8000
CONFIG_ESP32S3_DATA_CACHE_8WAYS=y
CONFIG_ESP32S3_DCACHE_ASSOCIATED_WAYS=8
CONFIG_ESP32S3_DATA_CACHE_LINE_64B=y
CONFIG_ESP32S3_DATA_CACHE_LINE_SIZE=64

#
# ESP-TLS
#
# CONFIG_ESP_TLS_USING_MBEDTLS=y
# CONFIG_ESP_TLS_USE_DS_PERIPHERAL=n
# CONFIG_ESP_TLS_CLIENT_SESSION_TICKETS is not set
# CONFIG_ESP_TLS_SERVER_SESSION_TICKETS is not set
# CONFIG_ESP_TLS_SERVER_CERT_SELECT_HOOK is not set
# CONFIG_ESP_TLS_SERVER_MIN_AUTH_MODE_OPTIONAL is not set
# CONFIG_ESP_TLS_PSK_VERIFICATION is not set
# CONFIG_ESP_TLS_INSECURE=y
# CONFIG_ESP_TLS_SKIP_SERVER_CERT_VERIFY=y
# end of ESP-TLS

#
# Ethernet
#
CONFIG_ETH_ENABLED=y
CONFIG_ETH_USE_SPI_ETHERNET=y
# CONFIG_ETH_SPI_ETHERNET_DM9051 is not set
CONFIG_ETH_SPI_ETHERNET_W5500=y
# CONFIG_ETH_SPI_ETHERNET_KSZ8851SNL is not set
# CONFIG_ETH_USE_OPENETH is not set
# CONFIG_ETH_TRANSMIT_MUTEX is not set
# end of Ethernet

#
# USB Serial/JTAG
#
CONFIG_USJ_ENABLE_USB_SERIAL_JTAG=n
CONFIG_USB_OTG_SUPPORTED=n

#
# LEDC
#
CONFIG_LEDC_CTRL_FUNC_IN_IRAM=y
CONFIG_SOC_LEDC_SUPPORTED=y
CONFIG_SOC_LEDC_SUPPORT_APB_CLOCK=y
CONFIG_SOC_LEDC_SUPPORT_XTAL_CLOCK=y
CONFIG_SOC_LEDC_CHANNEL_NUM=8
CONFIG_SOC_LEDC_TIMER_BIT_WIDTH=14
CONFIG_SOC_LEDC_SUPPORT_FADE_STOP=y

#
# RMT
#
CONFIG_RMT_SUPPRESS_DEPRECATE_WARN=y
CONFIG_RMT_ISR_IRAM_SAFE=y
CONFIG_RMT_RECV_FUNC_IN_IRAM=y
ONFIG_SOC_RMT_GROUPS=1
CONFIG_SOC_RMT_TX_CANDIDATES_PER_GROUP=4
CONFIG_SOC_RMT_RX_CANDIDATES_PER_GROUP=4
CONFIG_SOC_RMT_CHANNELS_PER_GROUP=8
CONFIG_SOC_RMT_MEM_WORDS_PER_CHANNEL=48
CONFIG_SOC_RMT_SUPPORT_RX_PINGPONG=y
CONFIG_SOC_RMT_SUPPORT_RX_DEMODULATION=y
CONFIG_SOC_RMT_SUPPORT_TX_ASYNC_STOP=y
CONFIG_SOC_RMT_SUPPORT_TX_LOOP_COUNT=y
CONFIG_SOC_RMT_SUPPORT_TX_LOOP_AUTO_STOP=y
CONFIG_SOC_RMT_SUPPORT_TX_SYNCHRO=y
CONFIG_SOC_RMT_SUPPORT_TX_CARRIER_DATA_ONLY=y
CONFIG_SOC_RMT_SUPPORT_XTAL=y
CONFIG_SOC_RMT_SUPPORT_RC_FAST=y
CONFIG_SOC_RMT_SUPPORT_APB=y
CONFIG_SOC_RMT_SUPPORT_DMA=y

#
# Camera
#
CONFIG_OV7670_SUPPORT=n
CONFIG_OV7725_SUPPORT=n
CONFIG_NT99141_SUPPORT=n
CONFIG_OV3660_SUPPORT=y
CONFIG_OV2640_SUPPORT=y
CONFIG_OV5640_SUPPORT=y
CONFIG_GC2145_SUPPORT=n
CONFIG_GC032A_SUPPORT=n
CONFIG_GC0308_SUPPORT=n
CONFIG_BF20A6_SUPPORT=n
CONFIG_BF3005_SUPPORT=n
CONFIG_SC030IOT_SUPPORT=n
CONFIG_MEGA_CCM_SUPPORT=n
CONFIG_HM1055_SUPPORT=n
CONFIG_HM0360_SUPPORT=n
# CONFIG_GC_SENSOR_WINDOWING_MODE=y
CONFIG_GC_SENSOR_SUBSAMPLE_MODE=y
CONFIG_CAMERA_TASK_STACK_SIZE=2048
# CONFIG_CAMERA_CORE0 is not set
CONFIG_CAMERA_CORE1=y
# CONFIG_CAMERA_NO_AFFINITY is not set
CONFIG_CAMERA_DMA_BUFFER_SIZE_MAX=32768
CONFIG_CAMERA_JPEG_MODE_FRAME_SIZE_AUTO=y
# CONFIG_CAMERA_JPEG_MODE_FRAME_SIZE_CUSTOM is not set
# end of Camera configuration

#
# Modbus configuration
#
# CONFIG_FMB_COMM_MODE_TCP_EN=y
CONFIG_FMB_TCP_PORT_DEFAULT=502
CONFIG_FMB_TCP_PORT_MAX_CONN=5
CONFIG_FMB_TCP_CONNECTION_TOUT_SEC=20
# CONFIG_FMB_TCP_UID_ENABLED is not set
CONFIG_FMB_COMM_MODE_RTU_EN=y
# CONFIG_FMB_COMM_MODE_ASCII_EN=y
CONFIG_FMB_MASTER_TIMEOUT_MS_RESPOND=3000
CONFIG_FMB_MASTER_DELAY_MS_CONVERT=200
CONFIG_FMB_QUEUE_LENGTH=20
CONFIG_FMB_PORT_TASK_STACK_SIZE=4096
CONFIG_FMB_SERIAL_BUF_SIZE=256
CONFIG_FMB_SERIAL_ASCII_BITS_PER_SYMB=8
CONFIG_FMB_ASCII_TIMEOUT_WAIT_BEFORE_SEND_MS=0
CONFIG_FMB_SERIAL_ASCII_TIMEOUT_RESPOND_MS=1000
CONFIG_FMB_PORT_TASK_PRIO=10
# CONFIG_FMB_PORT_TASK_AFFINITY_NO_AFFINITY is not set
# CONFIG_FMB_PORT_TASK_AFFINITY_CPU0=y
# CONFIG_FMB_PORT_TASK_AFFINITY_CPU1=y
CONFIG_FMB_PORT_TASK_AFFINITY=0x0
CONFIG_FMB_CONTROLLER_SLAVE_ID_SUPPORT=y
CONFIG_FMB_CONTROLLER_SLAVE_ID=0x00112233
CONFIG_FMB_CONTROLLER_SLAVE_ID_MAX_SIZE=32
CONFIG_FMB_CONTROLLER_NOTIFY_TIMEOUT=20
CONFIG_FMB_CONTROLLER_NOTIFY_QUEUE_SIZE=20
CONFIG_FMB_CONTROLLER_STACK_SIZE=4096
CONFIG_FMB_EVENT_QUEUE_TIMEOUT=20
CONFIG_FMB_TIMER_PORT_ENABLED=y
# CONFIG_FMB_TIMER_USE_ISR_DISPATCH_METHOD is not set
# CONFIG_FMB_EXT_TYPE_SUPPORT is not set
# end of Modbus configuration