dyadmisha
/
AI-on-the-edge-device
oglindă de https://github.com/jomjol/AI-on-the-edge-device


			
							1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374757677787980818283848586878889909192939495969798991001011021031041051061071081091101111121131141151161171181191201211221231241251261271281291301311321331341351361371381391401411421431441451461471481491501511521531541551561571581591601611621631641651661671681691701711721731741751761771781791801811821831841851861871881891901911921931941951961971981992002012022032042052062072082092102112122132142152162172182192202212222232242252262272282292302312322332342352362372382392402412422432442452462472482492502512522532542552562572582592602612622632642652662672682692702712722732742752762772782792802812822832842852862872882892902912922932942952962972982993003013023033043053063073083093103113123133143153163173183193203213223233243253263273283293303313323333343353363373383393403413423433443453463473483493503513523533543553563573583593603613623633643653663673683693703713723733743753763773783793803813823833843853863873883893903913923933943953963973983994004014024034044054064074084094104114124134144154164174184194204214224234244254264274284294304314324334344354364374384394404414424434444454464474484494504514524534544554564574584594604614624634644654664674684694704714724734744754764774784794804814824834844854864874884894904914924934944954964974984995005015025035045055065075085095105115125135145155165175185195205215225235245255265275285295305315325335345355365375385395405415425435445455465475485495505515525535545555565575585595605615625635645655665675685695705715725735745755765775785795805815825835845855865875885895905915925935945955965975985996006016026036046056066076086096106116126136146156166176186196206216226236246256266276286296306316326336346356366376386396406416426436446456466476486496506516526536546556566576586596606616626636646656666676686696706716726736746756766776786796806816826836846856866876886896906916926936946956966976986997007017027037047057067077087097107117127137147157167177187197207217227237247257267277287297307317327337347357367377387397407417427437447457467477487497507517527537547557567577587597607617627637647657667677687697707717727737747757767777787797807817827837847857867877887897907917927937947957967977987998008018028038048058068078088098108118128138148158168178188198208218228238248258268278288298308318328338348358368378388398408418428438448458468478488498508518528538548558568578588598608618628638648658668678688698708718728738748758768778788798808818828838848858868878888898908918928938948958968978988999009019029039049059069079089099109119129139149159169179189199209219229239249259269279289299309319329339349359369379389399409419429439449459469479489499509519529539549559569579589599609619629639649659669679689699709719729739749759769779789799809819829839849859869879889899909919929939949959969979989991000100110021003100410051006100710081009101010111012101310141015101610171018101910201021102210231024102510261027102810291030103110321033103410351036103710381039104010411042104310441045104610471048104910501051105210531054105510561057105810591060106110621063106410651066106710681069107010711072107310741075107610771078107910801081108210831084108510861087108810891090109110921093109410951096109710981099110011011102110311041105110611071108110911101111111211131114111511161117111811191120112111221123112411251126112711281129113011311132113311341135113611371138113911401141114211431144114511461147114811491150115111521153115411551156115711581159116011611162116311641165116611671168116911701171117211731174117511761177117811791180118111821183118411851186118711881189119011911192119311941195119611971198119912001201120212031204120512061207120812091210121112121213121412151216121712181219122012211222122312241225122612271228122912301231123212331234123512361237123812391240124112421243124412451246124712481249125012511252125312541255125612571258125912601261126212631264126512661267126812691270127112721273127412751276127712781279128012811282128312841285128612871288128912901291129212931294129512961297129812991300130113021303130413051306130713081309131013111312131313141315131613171318131913201321132213231324132513261327132813291330133113321333133413351336133713381339134013411342134313441345134613471348134913501351135213531354135513561357135813591360136113621363136413651366136713681369137013711372137313741375137613771378137913801381138213831384138513861387138813891390139113921393139413951396139713981399140014011402140314041405140614071408140914101411141214131414141514161417141814191420142114221423142414251426142714281429143014311432143314341435143614371438143914401441144214431444144514461447144814491450145114521453145414551456145714581459146014611462146314641465146614671468146914701471147214731474147514761477147814791480148114821483148414851486148714881489149014911492149314941495149614971498149915001501150215031504150515061507150815091510151115121513151415151516151715181519152015211522152315241525152615271528152915301531153215331534153515361537153815391540154115421543154415451546154715481549155015511552155315541555155615571558155915601561156215631564156515661567156815691570157115721573157415751576157715781579158015811582158315841585158615871588158915901591159215931594159515961597159815991600160116021603160416051606160716081609161016111612161316141615161616171618161916201621162216231624162516261627162816291630163116321633163416351636163716381639164016411642164316441645164616471648164916501651165216531654165516561657165816591660166116621663166416651666166716681669167016711672167316741675167616771678167916801681168216831684168516861687168816891690169116921693169416951696169716981699170017011702170317041705170617071708170917101711171217131714171517161717171817191720172117221723172417251726172717281729173017311732173317341735173617371738173917401741174217431744174517461747174817491750175117521753175417551756175717581759176017611762176317641765176617671768176917701771177217731774177517761777177817791780178117821783178417851786178717881789179017911792179317941795179617971798179918001801180218031804180518061807180818091810181118121813
							<!DOCTYPE html>
<html>
<head>
<title>Edit Config</title>
<meta charset="utf-8">

<style>
h1 {font-size: 2em;}
h2 {font-size: 1.5em; margin-block-start: 0.0em; margin-block-end: 0.2em;}
h3 {font-size: 1.2em;}
p {font-size: 1em;}

.button {
	padding: 5px 20px;
    width: 211px;
	font-size: 16px;	
}

textarea {
	font-size: 14px;
}

.description {
	color: black;
	font-size: 80%;
}

.disabled {
	color:lightgrey;
}

.smallSelect {
	width: 30px;
}

.invalid-input {
	background-color: #FFAA00;
}

.hidden {
	display: none;
}
</style>

</head>

<body style="font-family: arial; padding: 0px 10px;">
	<table style="width:100%">
		<tr>
			<td>
				<h2>Config.ini:</h2>
			</td>
			<td>
				<button class="button" id="Edit_Config_Direct" onclick="editConfigDirect()" style="display:none">Edit Config.ini direct</button>
				<input type="checkbox" id="ExpertModus_enabled" value="1"  onclick = 'UpdateExpertModus()' unchecked><label for="ExpertModus_enabled"> Expertenmodus </label> 
			</td>
		</tr>
	</table>

	<br>

	<div id = "divall" style="display:none">

	<table>
		<tr>
			<th width="20px"  style="text-align: left;">
				Enable
			</th>
			<th  width="200px"  style="text-align: left;">
				Parameter
			</th>
			<th style="text-align: left;">
				Value
			</th>
			<th style="text-align: left;">
				Information
			</th>
		</tr>

		<tr>
			<td colspan="4" style="padding-left: 20px;"><h4>MakeImage</h4></td>
		</tr> 
		<tr>
			<td width="20px"  style="padding-left: 40px;">
				<input type="checkbox" id="MakeImage_LogImageLocation_enabled" value="1"  onclick = 'InvertEnableItem("MakeImage", "LogImageLocation")' unchecked >
			</td>
			<td  width="200px">
				<class id="MakeImage_LogImageLocation_text" style="color:black;">LogImageLocation</class>
			</td>
			<td>
				<input type="text" name="name" id="MakeImage_LogImageLocation_value1">
			</td>
			<td class="description">
				Location to store raw images for logging
			</td>
		</tr>
		<tr>
			<td width="20px" style="padding-left: 40px;">
				<td"><input type="checkbox" id="MakeImage_LogfileRetentionInDays_enabled" value="1"  onclick = 'InvertEnableItem("MakeImage", "LogfileRetentionInDays")' unchecked ></td>
			</td>
			<td>
				<class id="MakeImage_LogfileRetentionInDays_text" style="color:black;">LogfileRetentionInDays</class>
			</td>
			<td>
				<input type="number" id="MakeImage_LogfileRetentionInDays_value1" size="13"  min="0" step="1">
			</td>
			<td class="description">
				Time to keep the raw image (in days -"0" = forever)
			</td>
		</tr>
		<tr class="expert" id="ex1">
			
			<td width="20px" style="padding-left: 40px;">
			</td>
			<td>
				<class id="MakeImage_WaitBeforeTakingPicture_text" style="color:black;">WaitBeforeTakingPicture</class>
			</td>
			<td>
				<input type="number" id="MakeImage_WaitBeforeTakingPicture_value1" size="13" min="0" step="any">
			</td>
			<td class="description">
				Wait time between illumination switch on and take the picture (in seconds)
			</td>
		</tr>
		<tr class="expert" id="ex2">
			<td width="20px" style="padding-left: 40px;">
			</td>
			<td>
				<class id="MakeImage_ImageQuality_text" style="color:black;">ImageQuality</class>
			</td>
			<td>
				<input type="number" id="MakeImage_ImageQuality_value1" size="13"   min="0" max="63">
			</td>
			<td class="description">
				Quality index for picture (default = "5" - "0" high ... "63" low)
			</td>
		</tr>
		<tr class="expert"  id="ex3">
			<td width="20px" style="padding-left: 40px;">
			</td>
			<td>
				<class id="MakeImage_ImageSize_text" style="color:black;">ImageSize</class>
			</td>
			<td>
				<select id="MakeImage_ImageSize_value1">
					<option value="VGA" selected>VGA</option>
					<option value="QVGA" >QVGA</option>
				</select>
			</td>
			<td class="description">
				Picture size camera (default = "VGA")
			</td>
		</tr>
		<tr class="expert"  id="Brightness_ex3">
			<td width="20px" style="padding-left: 40px;">
			</td>
			<td>
				<class id="MakeImage_Brightness_text" style="color:black;">Brightness</class>
			</td>
			<td>
				<input type="number" id="MakeImage_Brightness_value1" size="13"   min="-2" max="2">
			</td>
			<td style="font-size: 80%;">
				Image Brightness (-2 .. 2 - default = "0")
			</td>
		</tr>
		<tr class="expert"  id="MakeImage_FixedExposure_ex10">
			<td width="20px"  style="padding-left: 40px;">
			</td>
			<td  width="200px">
				<class id="MakeImage_FixedExposure_text" style="color:black;">FixedExposure</class>
			</td>
			<td>
				<select id="MakeImage_FixedExposure_value1">
					<option value="true" selected>true</option>
					<option value="false" >false</option>
				</select>
			</td>
			<td style="font-size: 80%;">
				Fixes the illumination setting of camera at the startup and uses this later --> individual round is faster
			</td>
		</tr>


<!--
		<tr class="expert"  id="Contrast_ex3">
			<td width="20px" style="padding-left: 40px;">
			</td>
			<td>
				<class id="MakeImage_Contrast_text" style="color:black;">Contrast</class>
			</td>
			<td>
				<input type="number" id="MakeImage_Contrast_value1" size="13"   min="-2" max="2">
			</td>
			<td style="font-size: 80%;">
				Image Contrast (-2 .. 2 - default = "0")
			</td>
		</tr>

		<tr class="expert"  id="Saturation_ex3">
			<td width="20px" style="padding-left: 40px;">
			</td>
			<td>
				<class id="MakeImage_Saturation_text" style="color:black;">Saturation</class>
			</td>
			<td>
				<input type="number" id="MakeImage_Saturation_value1" size="13"   min="-2" max="2">
			</td>
			<td style="font-size: 80%;">
				Image Saturation (-2 .. 2 - default = "0")
			</td>
		</tr>
-->		


		<tr class="expert"  id="ex4">
			<td colspan="4" style="padding-left: 20px;"><h4>Alignment</h4></td>
		</tr> 
		<tr class="expert"  id="ex6">
			<td  width="20px"  style="padding-left: 40px;">
			</td>
			<td width="200px">
				<class id="Alignment_SearchFieldX_text" style="color:black;">SearchFieldX</class>
			</td>
			<td>
				<input type="number" name="name" id="Alignment_SearchFieldX_value1" size="13" min="1"  step="1">
			</td>
			<td style="font-size: 80%;">
				x size (width) in which the reference is searched (default = "20") 
			</td>
		</tr>
		<tr class="expert"  id="ex8">
			<td  width="20px"  style="padding-left: 40px;">
			</td>
			<td>
				<class id="Alignment_SearchFieldY_text" style="color:black;">SearchFieldY</class>
			</td>
			<td>
				<input type="number" name="name" id="Alignment_SearchFieldY_value1" size="13" min="1">
			</td>
			<td style="font-size: 80%;">
				y size (height) in which the reference is searched (default = "20") 
			</td>
		</tr>
		<tr class="expert"  id="AlignmentAlgo_ex8">
			<td  width="20px"  style="padding-left: 40px;">
				<input type="checkbox" id="Alignment_AlignmentAlgo_enabled" value="1"  onclick = 'InvertEnableItem("Alignment", "AlignmentAlgo")' unchecked >
			</td>
			<td>
				<class id="Alignment_AlignmentAlgo_text" style="color:black;">AlignmentAlgo</class>
			</td>
			<td>
				<select id="Alignment_AlignmentAlgo_value1">
					<option value="default" selected>Default</option>
					<option value="highAccurity" >HighAccurity</option>
					<option value="fast" >Fast</option>
				</select>
				</td>
			<td style="font-size: 80%;">
				"Default" = use only R-Channel, "HighAccurity" = use all Channels (RGB, 3x slower), <br> "Fast" (First time RGB, then only check if image is shifted) 
			</td>
		</tr>


		<tr id="Category_Digits_ex4">
			<td colspan="4" style="padding-left: 20px;">
				<h4><input type="checkbox" id="Category_Digits_enabled" value="1"  onclick = 'UpdateAfterCategoryCheck()' unchecked >Digits</h4></td>
		</tr> 
		<tr>
			<td width="20px"  style="padding-left: 40px;">
			</td>
			<td  width="200px">
				<class id="Digits_Model_text" style="color:black;">Model</class>
			</td>
			<td>
				<input type="text" id="Digits_Model_value1">
			</td>
			<td style="font-size: 80%;">
				path to CNN model file for image recognition
			</td>
		</tr>
		<tr>
			<td width="20px"  style="padding-left: 40px;">
				<input type="checkbox" id="Digits_LogImageLocation_enabled" value="1"  onclick = 'InvertEnableItem("Digits", "LogImageLocation")' unchecked >
			</td>
			<td>
				<class id="Digits_LogImageLocation_text" style="color:black;">LogImageLocation</class>
			</td>
			<td>
				<input type="text" name="name" id="Digits_LogImageLocation_value1">
			</td>
			<td style="font-size: 80%;">
				Location to store separated digits for logging
			</td>
		</tr>
		<tr>
			<td width="20px"  style="padding-left: 40px;">
				<td"><input type="checkbox" id="Digits_LogfileRetentionInDays_enabled" value="1"  onclick = 'InvertEnableItem("Digits", "LogfileRetentionInDays")' unchecked ></td>
			</td>
			<td>
				<class id="Digits_LogfileRetentionInDays_text" style="color:black;">LogfileRetentionInDays</class>
			</td>
			<td>
				<input type="number" id="Digits_LogfileRetentionInDays_value1" min="0"  step="1">
			</td>
			<td style="font-size: 80%;">
				Time to keep the separated digit images (in days -"0" = forever)
			</td>
		</tr>
		<tr class="expert"  id="ex9">
			<td width="20px"  style="padding-left: 40px;">
			</td>
			<td>
				<class id="Digits_ModelInputSize_text" style="color:black;">ModelInputSize</class>
			</td>
			<td>
				x: <input type="number" id="Digits_ModelInputSize_value1" class="smallSelect" min="1" step="1">
				y: <input type="number" id="Digits_ModelInputSize_value2" class="smallSelect" min="1" step="1">
			</td>
			<td style="font-size: 80%;">
				Size of the input image for the CNN model
			</td>
		</tr>

		<tr class="expert"  id="ex4">
			<td colspan="4" style="padding-left: 20px;">
				<h4><input type="checkbox" id="Category_Analog_enabled" value="1"  onclick = 'UpdateAfterCategoryCheck()' unchecked > Analog</h4></td>
		</tr> 
		<tr>
			<td width="20px"  style="padding-left: 40px;"> </td>
			<td width="200px"> <class id="Analog_Model_text" style="color:black;">Model</class> </td>
			<td> <input type="text" id="Analog_Model_value1"> </td>
			<td style="font-size: 80%;"> path to CNN model file for image recognition</td>
		</tr>
		<tr>
			<td width="20px"  style="padding-left: 40px;">
				<input type="checkbox" id="Analog_LogImageLocation_enabled" value="1"  onclick = 'InvertEnableItem("Analog", "LogImageLocation")' unchecked >
			</td>
			<td> <class id="Analog_LogImageLocation_text" style="color:black;">LogImageLocation</class> </td>
			<td> <input type="text" name="name" id="Analog_LogImageLocation_value1"> </td>
			<td style="font-size: 80%;"> Location to store separated digits for logging </td>
		</tr>
		<tr>
			<td width="20px"  style="padding-left: 40px;">
				<td"><input type="checkbox" id="Analog_LogfileRetentionInDays_enabled" value="1"  onclick = 'InvertEnableItem("Analog", "LogfileRetentionInDays")' unchecked ></td>
			</td>
			<td> <class id="Analog_LogfileRetentionInDays_text" style="color:black;">LogfileRetentionInDays</class> </td>
			<td> <input type="number" id="Analog_LogfileRetentionInDays_value1" min="0" step="1"> </td>
			<td style="font-size: 80%;"> Time to keep the separated digit images (in days -"0" = forever) </td>
		</tr>

		<tr class="expert"  id="Analog_ExtendedResolution_ex10">
			<td width="20px"  style="padding-left: 40px;">
				<input type="checkbox" id="Analog_ExtendedResolution_enabled" value="1"  onclick = 'InvertEnableItem("Analog", "ExtendedResolution")' unchecked >
			</td>
			<td  width="200px">
				<class id="Analog_ExtendedResolution_text" style="color:black;">ExtendedResolution</class>
			</td>
			<td>
				<select id="Analog_ExtendedResolution_value1">
					<option value="true" selected>true</option>
					<option value="false" >false</option>
				</select>
			</td>
			<td style="font-size: 80%;">
				Enable to use the after point resolution for the last analog counter
			</td>
		</tr>


		ExtendedResolution

		<tr class="expert"  id="ex10">
			<td width="20px"  style="padding-left: 40px;"> </td>
			<td> <class id="Analog_ModelInputSize_text" style="color:black;">ModelInputSize</class> </td>
			<td>
				x: <input type="number" id="Analog_ModelInputSize_value1" class="smallSelect" min="1" step="1">
				y: <input type="number" id="Analog_ModelInputSize_value2" class="smallSelect" min="1" step="1">
			</td>
			<td style="font-size: 80%;"> Size of the input image for the CNN model </td>
		</tr>

		<tr>
			<td colspan="4" style="padding-left: 20px;"><h4>PostProcessing</h4></td>
		</tr> 		
		<tr>
			<td width="20px"  style="padding-left: 40px;">
				<input type="checkbox" id="PostProcessing_DecimalShift_enabled" value="1"  onclick = 'InvertEnableItem("PostProcessing", "DecimalShift")' unchecked >
			</td>
			<td  width="200px">
				<class id="PostProcessing_DecimalShift_text" style="color:black;">DecimalShift</class>
			</td>
			<td>
				<input type="number" id="PostProcessing_DecimalShift_value1" step="1">
			</td>
			<td style="font-size: 80%;">
				shift the digit separator within the digital digits (positiv and negativ)
			</td>
		</tr>
		<tr>
			<td width="20px"  style="padding-left: 40px;">
				<input type="checkbox" id="PostProcessing_PreValueUse_enabled" value="1"  onclick = 'InvertEnableItem("PostProcessing", "PreValueUse")' unchecked >
			</td>
			<td  width="200px">
				<class id="PostProcessing_PreValueUse_text" style="color:black;">PreValueUse</class>
			</td>
			<td>
				<select id="PostProcessing_PreValueUse_value1">
					<option value="true" selected>true</option>
					<option value="false" >false</option>
				</select>
			</td>
			<td style="font-size: 80%;">
				Enable to use the previous read value for consistency checks - also on reboots
			</td>
		</tr>
		<tr class="expert"  id="ex11">
			<td width="20px"  style="padding-left: 40px;">
				<input type="checkbox" id="PostProcessing_PreValueAgeStartup_enabled" value="1"  onclick = 'InvertEnableItem("PostProcessing", "PreValueAgeStartup")' unchecked >
			</td>
			<td  width="200px">
				<class id="PostProcessing_PreValueAgeStartup_text" style="color:black;">PreValueAgeStartup</class>
			</td>
			<td>
				<input type="number" id="PostProcessing_PreValueAgeStartup_value1" size="13"  min="0">
			</td>
			<td style="font-size: 80%;">
				Time (in minutes), how long a previous read value is valid after reboot (default = 720 min)
			</td>
		</tr>
		<tr>
			<td width="20px"  style="padding-left: 40px;">
				<input type="checkbox" id="PostProcessing_AllowNegativeRates_enabled" value="1"  onclick = 'InvertEnableItem("PostProcessing", "AllowNegativeRates")' unchecked >
			</td>
			<td  width="200px">
				<class id="PostProcessing_AllowNegativeRates_text" style="color:black;">AllowNegativeRates</class>
			</td>
			<td>
				<select id="PostProcessing_AllowNegativeRates_value1">
					<option value="true" selected>true</option>
					<option value="false" >false</option>
				</select>
			</td>
			<td style="font-size: 80%;">
				Set on "false" to ensure, that only positive changes are accepted (typically for counter)
			</td>
		</tr>
		<tr>
			<td width="20px"  style="padding-left: 40px;">
				<input type="checkbox" id="PostProcessing_MaxRateValue_enabled" value="1"  onclick = 'InvertEnableItem("PostProcessing", "MaxRateValue")' unchecked >
			</td>
			<td  width="200px">
				<class id="PostProcessing_MaxRateValue_text" style="color:black;">MaxRateValue</class>
			</td>
			<td>
				<input type="number" id="PostProcessing_MaxRateValue_value1" size="13" min="0" step="any">
			</td>
			<td style="font-size: 80%;">
				Maximum change of reading from one to the next readout
			</td>
		</tr>
		<tr class="expert"  id="ex12">
			<td width="20px"  style="padding-left: 40px;">
				<input type="checkbox" id="PostProcessing_ErrorMessage_enabled" value="1"  onclick = 'InvertEnableItem("PostProcessing", "ErrorMessage")' unchecked >
			</td>
			<td  width="200px">
				<class id="PostProcessing_ErrorMessage_text" style="color:black;">ErrorMessage</class>
			</td>
			<td>
				<select id="PostProcessing_ErrorMessage_value1">
					<option value="true" selected>true</option>
					<option value="false" >false</option>
				</select>
			</td>
			<td style="font-size: 80%;">
				Do not show error message in return value - in error case, the last valid number will be send out
			</td>
		</tr>
		<tr>
			<td width="20px"  style="padding-left: 40px;">
				<input type="checkbox" id="PostProcessing_CheckDigitIncreaseConsistency_enabled" value="1"  onclick = 'InvertEnableItem("PostProcessing", "CheckDigitIncreaseConsistency")' unchecked >
			</td>
			<td  width="200px">
				<class id="PostProcessing_CheckDigitIncreaseConsistency_text" style="color:black;">CheckDigitIncreaseConsistency</class>
			</td>
			<td>
				<select id="PostProcessing_CheckDigitIncreaseConsistency_value1">
					<option value="true" selected>true</option>
					<option value="false" >false</option>
				</select>
			</td>
			<td style="font-size: 80%;">
				Activate to enalbe additional consistency check - especially zero crossing check between digits
			</td>
		</tr>

		<tr>
			<td colspan="4" style="padding-left: 20px;"><h4><input type="checkbox" id="Category_MQTT_enabled" value="1"  onclick = 'UpdateAfterCategoryCheck()' unchecked > MQTT</h4></td>
		</tr> 		
		<tr>
			<td width="20px"  style="padding-left: 40px;">
				<input type="checkbox" id="MQTT_Uri_enabled" value="1"  onclick = 'InvertEnableItem("MQTT", "Uri")' unchecked >
			</td>
			<td  width="200px">
				<class id="MQTT_Uri_text" style="color:black;">Uri</class>
			</td>
			<td>
				<input type="text" id="MQTT_Uri_value1">
			</td>
			<td style="font-size: 80%;">
				URI to the MQTT broker including port e.g.: mqtt://IP-Address:Port
			</td>
		</tr>
		<tr>
			<td width="20px"  style="padding-left: 40px;">
				<input type="checkbox" id="MQTT_Topic_enabled" value="1"  onclick = 'InvertEnableItem("MQTT", "Topic")' unchecked >
			</td>
			<td  width="200px">
				<class id="MQTT_Topic_text" style="color:black;">Topic</class>
			</td>
			<td>
				<input type="text" id="MQTT_Topic_value1">
			</td>
			<td style="font-size: 80%;">
				MQTT topic, in which the value is registered
			</td>
		</tr>
		<tr>
			<td width="20px"  style="padding-left: 40px;">
				<input type="checkbox" id="MQTT_TopicError_enabled" value="1"  onclick = 'InvertEnableItem("MQTT", "TopicError")' unchecked >
			</td>
			<td  width="200px">
				<class id="MQTT_TopicError_text" style="color:black;">TopicError</class>
			</td>
			<td>
				<input type="text" id="MQTT_TopicError_value1">
			</td>
			<td style="font-size: 80%;">
				MQTT topic, in which the error status is reported (empty = no error)
			</td>
		</tr>
		<tr>
			<td width="20px"  style="padding-left: 40px;">
				<input type="checkbox" id="MQTT_TopicRate_enabled" value="1"  onclick = 'InvertEnableItem("MQTT", "TopicRate")' unchecked >
			</td>
			<td  width="200px">
				<class id="MQTT_TopicRate_text" style="color:black;">TopicRate</class>
			</td>
			<td>
				<input type="text" id="MQTT_TopicRate_value1">
			</td>
			<td style="font-size: 80%;">
				MQTT topic, in which the flow rate [units / minute] is reported
			</td>
		</tr>
		<tr>
			<td width="20px"  style="padding-left: 40px;">
				<input type="checkbox" id="MQTT_TopicTimeStamp_enabled" value="1"  onclick = 'InvertEnableItem("MQTT", "TopicTimeStamp")' unchecked >
			</td>
			<td  width="200px">
				<class id="MQTT_TopicTimeStamp_text" style="color:black;">TopicTimeStamp</class>
			</td>
			<td>
				<input type="text" id="MQTT_TopicTimeStamp_value1">
			</td>
			<td style="font-size: 80%;">
				MQTT topic, reporting the last correct readout
			</td>
		</tr>
		<tr>
			<td width="20px"  style="padding-left: 40px;">
				<input type="checkbox" id="MQTT_TopicUptime_enabled" value="1"  onclick = 'InvertEnableItem("MQTT", "TopicUptime")' unchecked >
			</td>
			<td  width="200px">
				<class id="MQTT_TopicUptime_text" style="color:black;">TopicUptime</class>
			</td>
			<td>
				<input type="text" id="MQTT_TopicUptime_value1">
			</td>
			<td style="font-size: 80%;">
				MQTT topic, ESP uptime after last flow
			</td>
		</tr>
		<tr>
			<td width="20px"  style="padding-left: 40px;">
				<input type="checkbox" id="MQTT_TopicFreeMem_enabled" value="1"  onclick = 'InvertEnableItem("MQTT", "TopicFreeMem")' unchecked >
			</td>
			<td  width="200px">
				<class id="MQTT_TopicFreeMem_text" style="color:black;">TopicFreeMem</class>
			</td>
			<td>
				<input type="text" id="MQTT_TopicFreeMem_value1">
			</td>
			<td style="font-size: 80%;">
				MQTT topic, ESP free heap memory after last flow
			</td>
		</tr>
		<tr>
			<td width="20px"  style="padding-left: 40px;">
				<input type="checkbox" id="MQTT_ClientID_enabled" value="1"  onclick = 'InvertEnableItem("MQTT", "ClientID")' unchecked >
			</td>
			<td  width="200px">
				<class id="MQTT_ClientID_text" style="color:black;">ClientID</class>
			</td>
			<td>
				<input type="text" id="MQTT_ClientID_value1">
			</td>
			<td style="font-size: 80%;">
				ClientID to connect to the MQTT broker
			</td>
		</tr>
		<tr>
			<td width="20px"  style="padding-left: 40px;">
				<input type="checkbox" id="MQTT_user_enabled" value="1"  onclick = 'InvertEnableItem("MQTT", "user")' unchecked >
			</td>
			<td  width="200px">
				<class id="MQTT_user_text" style="color:black;">user</class>
			</td>
			<td>
				<input type="text" id="MQTT_user_value1">
			</td>
			<td style="font-size: 80%;">
				user for MQTT authentication
			</td>
		</tr>
		<tr>
			<td width="20px"  style="padding-left: 40px;">
				<input type="checkbox" id="MQTT_password_enabled" value="1"  onclick = 'InvertEnableItem("MQTT", "password")' unchecked >
			</td>
			<td  width="200px">
				<class id="MQTT_password_text" style="color:black;">password</class>
			</td>
			<td>
				<input type="text" id="MQTT_password_value1">
			</td>
			<td style="font-size: 80%;">
				password for MQTT authentication
			</td>
		</tr>
	
		<tr>
			<td colspan="4" style="padding-left: 20px;"><h4>AutoTimer</h4></td>
		</tr> 			
		<tr class="expert"  id="ex13">
			<td width="20px"  style="padding-left: 40px;">
			</td>
			<td  width="200px">
				<class id="AutoTimer_AutoStart_text" style="color:black;">AutoStart</class>
			</td>
			<td>
				<select id="AutoTimer_AutoStart_value1">
					<option value="true" selected>true</option>
					<option value="false" >false</option>
				</select>
			</td>
			<td style="font-size: 80%;">
				Start the image recognition immediatly after power up. false is basically for debugging.
			</td>
		</tr>
		<tr>
			<td width="20px"  style="padding-left: 40px;">
			</td>
			<td  width="200px">
				<class id="AutoTimer_Intervall_text" style="color:black;">Intervall</class>
			</td>
			<td>
				<input type="number" id="AutoTimer_Intervall_value1" size="13" min="3" step="any">
			</td>
			<td style="font-size: 80%;">
				Intervall in which the counter is read (in minutes). Number must be greater than 3 minutes.
			</td>
		</tr>

		<tr>
			<td colspan="4" style="padding-left: 20px;">
				<h4><input type="checkbox" id="Category_GPIO_enabled" value="1"  onclick='UpdateAfterCategoryCheck()' unchecked > 
					GPIO Settings
					<span class="GPIO_item" style="color: red;">Enabling GPIO handler, disable by default integrated flash light. Please enable it with GPIO4 settings.</span>
				</h4>	
			</td>
		</tr> 	
		
		<tr class="GPIO_item">
			<td width="20px"  style="padding-left: 40px;">
				<input type="checkbox" id="GPIO_MainTopicMQTT_enabled" value="1"  onclick = 'InvertEnableItem("GPIO", "MainTopicMQTT")' unchecked >
			</td>
			<td  width="200px">
				<class id="GPIO_MainTopicMQTT_text" style="color:black;">MainTopicMQTT</class>
			</td>
			<td>
				<input type="text" id="GPIO_MainTopicMQTT_value1">
			</td>
			<td style="font-size: 80%;">
				MQTT main topic for GPIO
			</td>
		</tr>

		<!------------- GPIO0 begin ------------------>
		<tr class="GPIO_IO0 GPIO_item">
			<td width="20px"  style="padding-left: 40px;">
				<input type="checkbox" id="GPIO_IO0_enabled" value="1"  onclick = 'InvertEnableItem("GPIO", "IO0")' unchecked>
			</td>
			<td>
				<span id="GPIO_IO0_text">GPIO 0 state</span>
			</td>
			<td>
				<td">
					<select id="GPIO_IO0_value1">
						<option value="input">input</option>
						<option value="input-pullup">input pullup</option>
						<option value="input-pulldown">input pulldown</option>
						<option value="output">output</option>
						<option value="output-pwm" disabled>output pwm (not implemented)</option>
						<option value="external-flash-pwm" disabled>external flash light pwm controlled (not implemented)</option>
						<option value="external-flash-ws281x" disabled>external flash light ws281x controlled (not implemented)</option>
					</select>
				</td>
			</td>
			<td class="description">
				GPIO 0 Usable with restrictions.<br> 
				<span style="color: red">Must be disabled when camera is used.</span><br>
				<span style="color: red">Pin is used to activate flash mode and must therefore be HIGH when booting.</span>
			</td>
		</tr>
		<tr class="GPIO_IO0 GPIO_item">
			<td width="20px"  style="padding-left: 40px;"></td>
			<td>
				<span>GPIO 0 use interrupt</span>
			</td>
			<td>
				<td">
					<select id="GPIO_IO0_value2">
						<option value="disabled">disabled</option>
						<option value="rising-edge">rising edge</option>
						<option value="falling-edge">falling edge</option>
						<option value="rising-and-falling">rising and falling</option>
						<option value="low-level-trigger">low level trigger</option>
						<option value="high-level-trigger">high level trigger</option>
					</select>	
				</td>
			</td>
			<td class="description">
				GPIO 0 enable interrupt trigger
			</td>
		</tr>
		<tr class="GPIO_IO0 GPIO_item">
			<td width="20px"  style="padding-left: 40px;"></td>
			<td>
				<span>GPIO 0 PWM duty resolution</span>
			</td>
			<td>
				<td"><input type="number" id="GPIO_IO0_value3" min="1" max="20"></td>
			</td>
			<td class="description">
				GPIO 0 LEDC PWM duty resolution in bit
			</td>
		</tr>
		<tr class="GPIO_IO0 GPIO_item">
			<td width="20px"  style="padding-left: 40px;"></td>
			<td>
				<span>GPIO 0 enable MQTT</span>
			</td>
			<td>
				<td"><input type="checkbox" id="GPIO_IO0_value4"></td>
			</td>
			<td class="description">
				GPIO 0 enable MQTT publishing/subscribing
			</td>
		</tr>
		<tr class="GPIO_IO0 GPIO_item">
			<td width="20px"  style="padding-left: 40px;"></td>
			<td>
				<span>GPIO 0 enable HTTP</span>
			</td>
			<td>
				<td"><input type="checkbox" id="GPIO_IO0_value5"></td>
			</td>
			<td class="description">
				GPIO 0 enable HTTP write/read
			</td>
		</tr>
		<tr class="GPIO_IO0 GPIO_item">
			<td width="20px"  style="padding-left: 40px;"></td>
			<td>
				<span>GPIO 0 name</span>
			</td>
			<td>
				<td"><input type="text" id="GPIO_IO0_value6"></td>
			</td>
			<td class="description">
				GPIO 0 MQTT topic name (empty = GPIO0). Allowed characters (a-z, A-Z, 0-9, _, -)
			</td>
		</tr>
		<!------------- GPIO0 end ------------------>

		<!------------- GPIO1 begin ------------------>
		<tr class="GPIO_IO1 GPIO_item">
			<td width="20px"  style="padding-left: 40px;">
				<input type="checkbox" id="GPIO_IO1_enabled" value="1"  onclick = 'InvertEnableItem("GPIO", "IO1")' unchecked>
			</td>
			<td>
				<span id="GPIO_IO1_text">GPIO 1 state</span>
			</td>
			<td>
				<td">
					<select id="GPIO_IO1_value1">
						<option value="input">input</option>
						<option value="input-pullup">input pullup</option>
						<option value="input-pulldown">input pulldown</option>
						<option value="output">output</option>
						<option value="output-pwm" disabled>output pwm (not implemented)</option>
						<option value="external-flash-pwm" disabled>external flash light pwm controlled (not implemented)</option>
						<option value="external-flash-ws281x" disabled>external flash light ws281x controlled (not implemented)</option>
					</select>
				</td>
			</td>
			<td class="description">
				GPIO 1 <br><span style="color: blue">Used by default for serial communication as TX pin.<br>Required for seriales monitor.</span>
			</td>
		</tr>
		<tr class="GPIO_IO1 GPIO_item">
			<td width="20px"  style="padding-left: 40px;"></td>
			<td>
				<span>GPIO 1 use interrupt</span>
			</td>
			<td>
				<td">
					<select id="GPIO_IO1_value2">
						<option value="disabled">disabled</option>
						<option value="rising-edge" disabled>rising edge</option>
						<option value="falling-edge" disabled>falling edge</option>
						<option value="rising-and-falling">rising and falling</option>
						<option value="low-level-trigger">low level trigger</option>
						<option value="high-level-trigger">high level trigger</option>
					</select>	
				</td>
			</td>
			<td class="description">
				GPIO 1 enable interrupt trigger
			</td>
		</tr>
		<tr class="GPIO_IO1 GPIO_item">
			<td width="20px"  style="padding-left: 40px;"></td>
			<td>
				<span>GPIO 1 PWM duty resolution</span>
			</td>
			<td>
				<td"><input type="number" id="GPIO_IO1_value3" min="1" max="20"></td>
			</td>
			<td class="description">
				GPIO 1 LEDC PWM duty resolution in bit
			</td>
		</tr>
		<tr class="GPIO_IO1 GPIO_item">
			<td width="20px"  style="padding-left: 40px;"></td>
			<td>
				<span>GPIO 1 enable MQTT</span>
			</td>
			<td>
				<td"><input type="checkbox" id="GPIO_IO1_value4"></td>
			</td>
			<td class="description">
				GPIO 1 enable MQTT publishing/subscribing
			</td>
		</tr>
		<tr class="GPIO_IO1 GPIO_item">
			<td width="20px"  style="padding-left: 40px;"></td>
			<td>
				<span>GPIO 1 enable HTTP</span>
			</td>
			<td>
				<td"><input type="checkbox" id="GPIO_IO1_value5"></td>
			</td>
			<td class="description">
				GPIO 1 enable HTTP write/read
			</td>
		</tr>
		<tr class="GPIO_IO1 GPIO_item">
			<td width="20px"  style="padding-left: 40px;"></td>
			<td>
				<span>GPIO 1 name</span>
			</td>
			<td>
				<td"><input type="text" id="GPIO_IO1_value6"></td>
			</td>
			<td class="description">
				GPIO 1 MQTT topic name (empty = GPIO1). Allowed characters (a-z, A-Z, 0-9, _, -)
			</td>
		</tr>
		<!------------- GPIO1 end ------------------>

		<!------------- GPIO3 begin ------------------>
		<tr class="GPIO_IO3 GPIO_item">
			<td width="20px"  style="padding-left: 40px;">
				<input type="checkbox" id="GPIO_IO3_enabled" value="1"  onclick = 'InvertEnableItem("GPIO", "IO3")' unchecked>
			</td>
			<td>
				<span id="GPIO_IO3_text">GPIO 3 state</span>
			</td>
			<td>
				<td">
					<select id="GPIO_IO3_value1">
						<option value="input">input</option>
						<option value="input-pullup">input pullup</option>
						<option value="input-pulldown">input pulldown</option>
						<option value="output">output</option>
						<option value="output-pwm" disabled>output pwm (not implemented)</option>
						<option value="external-flash-pwm" disabled>external flash light pwm controlled (not implemented)</option>
						<option value="external-flash-ws281x" disabled>external flash light ws281x controlled (not implemented)</option>
					</select>
				</td>
			</td>
			<td class="description">
				GPIO 3 <span style="color: blue">Used by default for serial communication as RX pin.</span>
			</td>
		</tr>
		<tr class="GPIO_IO3 GPIO_item">
			<td width="20px"  style="padding-left: 40px;"></td>
			<td>
				<span>GPIO 3 use interrupt</span>
			</td>
			<td>
				<td">
					<select id="GPIO_IO3_value2">
						<option value="disabled">disabled</option>
						<option value="rising-edge" disabled>rising edge</option>
						<option value="falling-edge" disabled>falling edge</option>
						<option value="rising-and-falling">rising and falling</option>
						<option value="low-level-trigger">low level trigger</option>
						<option value="high-level-trigger">high level trigger</option>
					</select>	
				</td>
			</td>
			<td class="description">
				GPIO 3 Used by default for serial communication as RX pin.
			</td>
		</tr>
		<tr class="GPIO_IO3 GPIO_item">
			<td width="20px"  style="padding-left: 40px;"></td>
			<td>
				<span>GPIO 3 PWM duty resolution</span>
			</td>
			<td>
				<td"><input type="number" id="GPIO_IO3_value3" min="1" max="20"></td>
			</td>
			<td class="description">
				GPIO 3 LEDC PWM duty resolution in bit
			</td>
		</tr>
		<tr class="GPIO_IO3 GPIO_item">
			<td width="20px"  style="padding-left: 40px;"></td>
			<td>
				<span>GPIO 3 enable MQTT</span>
			</td>
			<td>
				<td"><input type="checkbox" id="GPIO_IO3_value4"></td>
			</td>
			<td class="description">
				GPIO 3 enable MQTT publishing/subscribing
			</td>
		</tr>
		<tr class="GPIO_IO3 GPIO_item">
			<td width="20px"  style="padding-left: 40px;"></td>
			<td>
				<span>GPIO 3 enable HTTP</span>
			</td>
			<td>
				<td"><input type="checkbox" id="GPIO_IO3_value5"></td>
			</td>
			<td class="description">
				GPIO 3 enable HTTP write/read
			</td>
		</tr>
		<tr class="GPIO_IO3 GPIO_item">
			<td width="20px"  style="padding-left: 40px;"></td>
			<td>
				<span>GPIO 3 name</span>
			</td>
			<td>
				<td"><input type="text" id="GPIO_IO3_value6"></td>
			</td>
			<td class="description">
				GPIO 3 MQTT topic name (empty = GPIO3). Allowed characters (a-z, A-Z, 0-9, _, -)
			</td>
		</tr>
		<!------------- GPIO3 end ------------------>

		<!------------- GPIO4 begin ------------------>
		<tr class="GPIO_IO4 GPIO_item">
			<td width="20px"  style="padding-left: 40px;">
				<input type="checkbox" id="GPIO_IO4_enabled" value="1"  onclick = 'InvertEnableItem("GPIO", "IO4")' unchecked>
			</td>
			<td>
				<span id="GPIO_IO4_text">GPIO 4 state</span>
			</td>
			<td>
				<td">
					<select id="GPIO_IO4_value1">
						<option value="input">input</option>
						<option value="input-pullup">input pullup</option>
						<option value="input-pulldown">input pulldown</option>
						<option value="output">output</option>
						<option value="built-in-led">built-in led flash light</option>
						<option value="output-pwm" disabled>output pwm (not implemented)</option>
						<option value="external-flash-pwm" disabled>external flash light pwm controlled (not implemented)</option>
						<option value="external-flash-ws281x" disabled>external flash light ws281x controlled (not implemented)</option>
					</select>
				</td>
			</td>
			<td class="description">
				GPIO 4 Usable with restrictions.<br> 
				<span style="color: red">Pin is used for build-in flash light.</span>
			</td>
		</tr>
		<tr class="GPIO_IO4 GPIO_item">
			<td width="20px"  style="padding-left: 40px;"></td>
			<td>
				<span>GPIO 4 use interrupt</span>
			</td>
			<td>
				<td">
					<select id="GPIO_IO4_value2">
						<option value="disabled">disabled</option>
						<option value="rising-edge">rising edge</option>
						<option value="falling-edge">falling edge</option>
						<option value="rising-and-falling">rising and falling</option>
						<option value="low-level-trigger">low level trigger</option>
						<option value="high-level-trigger">high level trigger</option>
					</select>	
				</td>
			</td>
			<td class="description">
				GPIO 4 enable interrupt trigger
			</td>
		</tr>
		<tr class="GPIO_IO4 GPIO_item">
			<td width="20px"  style="padding-left: 40px;"></td>
			<td>
				<span>GPIO 4 PWM duty resolution</span>
			</td>
			<td>
				<td"><input type="number" id="GPIO_IO4_value3" min="1" max="20"></td>
			</td>
			<td class="description">
				GPIO 4 LEDC PWM duty resolution in bit
			</td>
		</tr>
		<tr class="GPIO_IO4 GPIO_item">
			<td width="20px"  style="padding-left: 40px;"></td>
			<td>
				<span>GPIO 4 enable MQTT</span>
			</td>
			<td>
				<td"><input type="checkbox" id="GPIO_IO4_value4"></td>
			</td>
			<td class="description">
				GPIO 4 enable MQTT publishing/subscribing
			</td>
		</tr>
		<tr class="GPIO_IO4 GPIO_item">
			<td width="20px"  style="padding-left: 40px;"></td>
			<td>
				<span>GPIO 4 enable HTTP</span>
			</td>
			<td>
				<td"><input type="checkbox" id="GPIO_IO4_value5"></td>
			</td>
			<td class="description">
				GPIO 4 enable HTTP write/read
			</td>
		</tr>
		<tr class="GPIO_IO4 GPIO_item">
			<td width="20px"  style="padding-left: 40px;"></td>
			<td>
				<span>GPIO 4 name</span>
			</td>
			<td>
				<td"><input type="text" id="GPIO_IO4_value6"></td>
			</td>
			<td class="description">
				GPIO 4 MQTT topic name (empty = GPIO4). Allowed characters (a-z, A-Z, 0-9, _, -)
			</td>
		</tr>
		<!------------- GPIO4 end ------------------>

		<!------------- GPIO12 begin ------------------>
		<tr class="GPIO_IO12 GPIO_item">
			<td width="20px"  style="padding-left: 40px;">
				<input type="checkbox" id="GPIO_IO12_enabled" value="1"  onclick = 'InvertEnableItem("GPIO", "IO12")' unchecked>
			</td>
			<td>
				<span id="GPIO_IO12_text">GPIO 12 state</span>
			</td>
			<td>
				<td">
					<select id="GPIO_IO12_value1">
						<option value="input">input</option>
						<option value="input-pullup">input pullup</option>
						<option value="input-pulldown">input pulldown</option>
						<option value="output">output</option>
						<option value="output-pwm" disabled>output pwm (not implemented)</option>
						<option value="external-flash-pwm" disabled>external flash light pwm controlled (not implemented)</option>
						<option value="external-flash-ws281x" disabled>external flash light ws281x controlled (not implemented)</option>
					</select>
				</td>
			</td>
			<td class="description">
				GPIO 12 is usable without restrictions
			</td>
		</tr>
		<tr class="GPIO_IO12 GPIO_item">
			<td width="20px"  style="padding-left: 40px;"></td>
			<td>
				<span>GPIO 12 use interrupt</span>
			</td>
			<td>
				<td">
					<select id="GPIO_IO12_value2">
						<option value="disabled">disabled</option>
						<option value="rising-edge">rising edge</option>
						<option value="falling-edge">falling edge</option>
						<option value="rising-and-falling">rising and falling</option>
						<option value="low-level-trigger">low level trigger</option>
						<option value="high-level-trigger">high level trigger</option>
					</select>	
				</td>
			</td>
			<td class="description">
				GPIO 12 enable interrupt trigger
			</td>
		</tr>
		<tr class="GPIO_IO12 GPIO_item">
			<td width="20px"  style="padding-left: 40px;"></td>
			<td>
				<span>GPIO 12 PWM duty resolution</span>
			</td>
			<td>
				<td"><input type="number" id="GPIO_IO12_value3" min="1" max="20"></td>
			</td>
			<td class="description">
				GPIO 12 LEDC PWM duty resolution in bit
			</td>
		</tr>
		<tr class="GPIO_IO12 GPIO_item">
			<td width="20px"  style="padding-left: 40px;"></td>
			<td>
				<span>GPIO 12 enable MQTT</span>
			</td>
			<td>
				<td"><input type="checkbox" id="GPIO_IO12_value4"></td>
			</td>
			<td class="description">
				GPIO 12 enable MQTT publishing/subscribing
			</td>
		</tr>
		<tr class="GPIO_IO12 GPIO_item">
			<td width="20px"  style="padding-left: 40px;"></td>
			<td>
				<span>GPIO 12 enable HTTP</span>
			</td>
			<td>
				<td"><input type="checkbox" id="GPIO_IO12_value5"></td>
			</td>
			<td class="description">
				GPIO 12 enable HTTP write/read
			</td>
		</tr>
		<tr class="GPIO_IO12 GPIO_item">
			<td width="20px"  style="padding-left: 40px;"></td>
			<td>
				<span>GPIO 12 name</span>
			</td>
			<td>
				<td"><input type="text" id="GPIO_IO12_value6"></td>
			</td>
			<td class="description">
				GPIO 12 MQTT topic name (empty = GPIO12). Allowed characters (a-z, A-Z, 0-9, _, -)
			</td>
		</tr>
		<!------------- GPIO12 end ------------------>

		<!------------- GPIO13 begin ------------------>
		<tr class="GPIO_IO13 GPIO_item">
			<td width="20px"  style="padding-left: 40px;">
				<input type="checkbox" id="GPIO_IO13_enabled" value="1"  onclick = 'InvertEnableItem("GPIO", "IO13")' unchecked>
			</td>
			<td>
				<span id="GPIO_IO13_text">GPIO 13 state</span>
			</td>
			<td>
				<td">
					<select id="GPIO_IO13_value1">
						<option value="input">input</option>
						<option value="input-pullup">input pullup</option>
						<option value="input-pulldown">input pulldown</option>
						<option value="output">output</option>
						<option value="output-pwm" disabled>output pwm (not implemented)</option>
						<option value="external-flash-pwm" disabled>external flash light pwm controlled (not implemented)</option>
						<option value="external-flash-ws281x" disabled>external flash light ws281x controlled (not implemented)</option>
					</select>
				</td>
			</td>
			<td class="description">
				GPIO 13 is usable without restrictions
			</td>
		</tr>
		<tr class="GPIO_IO13 GPIO_item">
			<td width="20px"  style="padding-left: 40px;"></td>
			<td>
				<span>GPIO 13 use interrupt</span>
			</td>
			<td>
				<td">
					<select id="GPIO_IO13_value2">
						<option value="disabled">disabled</option>
						<option value="rising-edge" disabled>rising edge</option>
						<option value="falling-edge" disabled>falling edge</option>
						<option value="rising-and-falling">rising and falling</option>
						<option value="low-level-trigger">low level trigger</option>
						<option value="high-level-trigger">high level trigger</option>
					</select>	
				</td>
			</td>
			<td class="description">
				GPIO 13 enable interrupt trigger
			</td>
		</tr>
		<tr class="GPIO_IO13 GPIO_item">
			<td width="20px"  style="padding-left: 40px;"></td>
			<td>
				<span>GPIO 13 PWM duty resolution</span>
			</td>
			<td>
				<td"><input type="number" id="GPIO_IO13_value3" min="1" max="20"></td>
			</td>
			<td class="description">
				GPIO 13 LEDC PWM duty resolution in bit
			</td>
		</tr>
		<tr class="GPIO_IO13 GPIO_item">
			<td width="20px"  style="padding-left: 40px;"></td>
			<td>
				<span>GPIO 13 enable MQTT</span>
			</td>
			<td>
				<td"><input type="checkbox" id="GPIO_IO13_value4"></td>
			</td>
			<td class="description">
				GPIO 13 enable MQTT publishing/subscribing
			</td>
		</tr>
		<tr class="GPIO_IO13 GPIO_item">
			<td width="20px"  style="padding-left: 40px;"></td>
			<td>
				<span>GPIO 13 enable HTTP</span>
			</td>
			<td>
				<td"><input type="checkbox" id="GPIO_IO13_value5"></td>
			</td>
			<td class="description">
				GPIO 13 enable HTTP write/read
			</td>
		</tr>
		<tr class="GPIO_IO13 GPIO_item">
			<td width="20px"  style="padding-left: 40px;"></td>
			<td>
				<span>GPIO 13 name</span>
			</td>
			<td>
				<td"><input type="text" id="GPIO_IO13_value6"></td>
			</td>
			<td class="description">
				GPIO 13 MQTT topic name (empty = GPIO13). Allowed characters (a-z, A-Z, 0-9, _, -)
			</td>
		</tr>
		<!------------- GPIO13 end ------------------>

		<tr>
			<td colspan="4" style="padding-left: 20px;"><h4>Debug</h4></td>
		</tr> 		
		<tr>
			<td width="20px"  style="padding-left: 40px;">
				<input type="checkbox" id="Debug_Logfile_enabled" value="1"  onclick = 'InvertEnableItem("Debug", "Logfile")' unchecked >
			</td>
			<td  width="200px">
				<class id="Debug_Logfile_text" style="color:black;">Logfile</class>
			</td>
			<td>
				<select id="Debug_Logfile_value1">
					<option value="true" selected>true</option>
					<option value="false" >false</option>
				</select>
			</td>
			<td class="description">
				Turn on/off the extended logging
			</td>
		</tr>
		<tr>
			<td width="20px"  style="padding-left: 40px;">
				<td"><input type="checkbox" id="Debug_LogfileRetentionInDays_enabled" value="1"  onclick = 'InvertEnableItem("Debug", "LogfileRetentionInDays")' unchecked ></td>
			</td>
			<td>
				<class id="Debug_LogfileRetentionInDays_text" style="color:black;">LogfileRetentionInDays</class>
			</td>
			<td>
				<input type="number" id="Debug_LogfileRetentionInDays_value1" size="13"  min="0" step="1">
			</td>
			<td class="description">
				Time to keep the log files (in days - "0" = forever)
			</td>
		</tr>

		<tr>
			<td colspan="4" style="padding-left: 20px;"><h4>System</h4></td>
		</tr> 	
		<tr>
			<td width="20px"  style="padding-left: 40px;">
				<td"><input type="checkbox" id="System_TimeZone_enabled" value="1"  onclick = 'InvertEnableItem("System", "TimeZone")' unchecked ></td>
			</td>
			<td>
				<class id="System_TimeZone_text" style="color:black;">TimeZone</class>
			</td>
			<td>
				<input type="text" id="System_TimeZone_value1">
			</td>
			<td class="description">
				Time zone in POSIX syntax (Europe/Berlin = "CET-1CEST,M3.5.0,M10.5.0/3" - incl. daylight saving)
			</td>
		</tr>
		<tr class="expert"  id="ex16">
			<td width="20px"  style="padding-left: 40px;">
				<td"><input type="checkbox" id="System_TimeServer_enabled" value="1"  onclick = 'InvertEnableItem("System", "TimeServer")' unchecked ></td>
			</td>
			<td>
				<class id="System_TimeServer_text" style="color:black;">TimeServer</class>
			</td>
			<td>
				<input type="text" id="System_TimeServer_value1">
			</td>
			<td class="description">
				Time server to synchronize system time (default: "pool.ntp.org" - used if nothing is specified)
			</td>
		</tr>
		<tr class="expert"  id="System_Hostname">
			<td width="20px"  style="padding-left: 40px;">
				<td"><input type="checkbox" id="System_Hostname_enabled" value="1"  onclick = 'InvertEnableItem("System", "Hostname")' unchecked ></td>
			</td>
			<td>
				<class id="System_Hostname_text" style="color:black;">Hostname</class>
			</td>
			<td>
				<input type="text" id="System_Hostname_value1">
			</td>
			<td class="description">
				Hostname for server - will be transfered to wlan.ini at next startup)
			</td>
		</tr>

	</table>

	<p>
		<button class="button" onclick="saveTextAsFile()">Update Config.ini</button>
	</p>
	<p>
		
	</p>
	<div id="doreboot">
		<p>
			<button class="button" id="Edit_Config_Direct" onclick="editConfigDirect()" style="display:none">Edit Config.ini direct</button>
			
			<button class="button" id="reboot" type="button" onclick="doReboot()">Reboot to activate updates</button>
		</p>
	</div>

</div>

<script type="text/javascript" src="./gethost.js"></script> 
<script type="text/javascript" src="./readconfigcommon.js"></script>  
<script type="text/javascript" src="./readconfigparam.js"></script>  
 
<script type="text/javascript">
	var canvas = document.getElementById('canvas'),
		basepath = "http://192.168.178.22"; 
		param;
		category;


function LoadConfigNeu() {
	var isInitialSetup = getParameterByName('InitialSetup');
	if (isInitialSetup === 'true')
	{
		document.getElementById("reboot").style.display = "none";
	}


	basepath = getbasepath(); 
	if (!loadConfig(basepath)) {
		alert("Config.ini could not be loaded!\nPlease reload the page.");
		return;
	} 
	loadConfig(basepath); 
	ParseConfig();	
	param = getConfigParameters();
	category = getConfigCategory();	
	UpdateInput();
	UpdateExpertModus();
	document.getElementById("divall").style.display = ''; 
}


function getParameterByName(name, url = window.location.href) {
    name = name.replace(/[\[\]]/g, '\\$&');
    var regex = new RegExp('[?&]' + name + '(=([^&#]*)|&|#|$)'),
        results = regex.exec(url);

	if (!results) return null;
    if (!results[2]) return '';
	return decodeURIComponent(results[2].replace(/\+/g, ' '));
}	

function WriteParameter(_param, _category, _cat, _name, _optional){

	let anzpara = _param[_cat][_name].anzParam;
	if (_param[_cat][_name]["found"]){
		if (_optional) {
			document.getElementById(_cat+"_"+_name+"_enabled").checked = _param[_cat][_name]["enabled"];
			for (var j = 1; j <= anzpara; ++j) {
				document.getElementById(_cat+"_"+_name+"_value"+j).disabled = !_param[_cat][_name]["enabled"];	
			}		
		}
		document.getElementById(_cat+"_"+_name+"_text").style="color:black;"
		setEnabled(_cat+"_"+_name, true);

		for (var j = 1; j <= anzpara; ++j) {
			let element = document.getElementById(_cat+"_"+_name+"_value"+j);
			if (element.tagName.toLowerCase() == "select") {
				var textToFind = _param[_cat][_name]["value"+j];
				for (var i = 0; i < element.options.length; i++) {
					if (element.options[i].value.toLowerCase() === textToFind.toLowerCase()) {
						element.selectedIndex = i;
						break;
					}
				}
			}
			else if ((element.getAttribute("type") != null) && (element.getAttribute("type").toLowerCase() == "checkbox")) {
				element.checked = _param[_cat][_name]["value"+j] == "true";
			}
			else {
				element.value = _param[_cat][_name]["value"+j];
			}
		}
	}
	else {
		if (_optional) {
			document.getElementById(_cat+"_"+_name+"_enabled").disabled = true;	
			for (var j = 1; j <= anzpara; ++j) {
				document.getElementById(_cat+"_"+_name+"_value"+j).disabled = true;	
			}	
		}
		document.getElementById(_cat+"_"+_name+"_text").style="color:lightgrey;"
		setEnabled(_cat+"_"+_name, false);	
	}


	///////////////// am Ende, falls Kategorie als gesamtes nicht ausgewählt --> deaktivieren
	if (_category[_cat]["enabled"] == false) 
	{
		if (_optional) {
			document.getElementById(_cat+"_"+_name+"_enabled").disabled = true;	
			for (var j = 1; j <= anzpara; ++j) {
				document.getElementById(_cat+"_"+_name+"_value"+j).disabled = true;	
			}	
		}
		document.getElementById(_cat+"_"+_name+"_text").style="color:lightgrey;"		
		setEnabled(_cat+"_"+_name, false);
	}
	EnDisableItem(_category[_cat]["enabled"], _param, _category, _cat, _name, _optional);
}

function InvertEnableItem(_cat, _param)
{
	_zw = _cat + "_" + _param + "_enabled";
	_isOn = document.getElementById(_zw).checked;

	_color = "color:lightgrey;";
	if (_isOn) {
		_color = "color:black;";
	}

	_zw = _cat + "_" + _param + "_text";
	document.getElementById(_zw).disabled = !_isOn;
	document.getElementById(_zw).style = _color;

	setEnabled(_cat + "_" + _param, _isOn);

	for (var j = 1; j <= param[_cat][_param]["anzParam"]; ++j) {
			document.getElementById(_cat+"_"+_param+"_value"+j).disabled = !_isOn;	
			document.getElementById(_cat+"_"+_param+"_value"+j).style=_color;	
	}
}

function setEnabled(className, enabled) {
	let elements = document.getElementsByClassName(className);
	for (i = 0; i < elements.length; i++) {
		if (enabled) {
			elements[i].classList.remove("disabled");
		} else {
			elements[i].classList.add("disabled");
		}

		let inputs = elements[i].getElementsByTagName("input");
		for (j = 0; j < inputs.length; j++) {
			if (inputs[j].id.endsWith("_enabled"))
				continue;

			if (enabled) {
				inputs[j].removeAttribute("disabled");
			} else {
				inputs[j].setAttribute("disabled", "disabled");
			}
		}
	}
}

function setVisible(className, visible) {
	let elements = document.getElementsByClassName(className);
	for (i = 0; i < elements.length; i++) {
		if (visible) {
			elements[i].classList.remove("hidden");
		} else {
			elements[i].classList.add("hidden");
		}
	}
}

function EnDisableItem(_status, _param, _category, _cat, _name, _optional)
{
	_status = _param[_cat][_name]["found"] && _category[_cat]["enabled"];

	_color = "color:lightgrey;";
	if (_status) {
		_color = "color:black;";
	}

	if (_optional) {
		document.getElementById(_cat+"_"+_name+"_enabled").disabled = !_status;
		document.getElementById(_cat+"_"+_name+"_enabled").style=_color;	
	}

	if (!_param[_cat][_name]["enabled"]) {
		_status = false;
		_color = "color:lightgrey;";
	}

	document.getElementById(_cat+"_"+_name+"_text").disabled = !_status;
	document.getElementById(_cat+"_"+_name+"_text").style = _color;

	setEnabled(_cat+"_"+_name, _status);

	for (var j = 1; j <= _param[_cat][_name]["anzParam"]; ++j) {
			document.getElementById(_cat+"_"+_name+"_value"+j).disabled = !_status;	
			document.getElementById(_cat+"_"+_name+"_value"+j).style=_color;	
	}
}


function ReadParameter(_param, _cat, _name, _optional){
	if (_param[_cat][_name]["found"]){
		if (_optional) {
			_param[_cat][_name]["enabled"] = document.getElementById(_cat+"_"+_name+"_enabled").checked;			
		}

		for (var j = 1; j <= _param[_cat][_name]["anzParam"]; ++j) {
			let element = document.getElementById(_cat+"_"+_name+"_value"+j);
			if (element.tagName.toLowerCase() == "select") {
				_param[_cat][_name]["value"+j] = element.selectedIndex > -1 ? element.options[element.selectedIndex].value : "";
			}
			else if ((element.getAttribute("type") != null) && (element.getAttribute("type").toLowerCase() == "checkbox")) {
				_param[_cat][_name]["value"+j] = element.checked;
			}
			else {
				if ((_param[_cat][_name].checkRegExList != null) && (_param[_cat][_name].checkRegExList[j-1] != null)) {
					if (!element.value.match(_param[_cat][_name].checkRegExList[j-1])) {
						element.classList.add("invalid-input");
					} else {
						element.classList.remove("invalid-input");
					}
				}
				_param[_cat][_name]["value"+j] = element.value;	
			}
		}		
	}
}

function UpdateInput() {
	document.getElementById("Category_Analog_enabled").checked = category["Analog"]["enabled"];
	document.getElementById("Category_Digits_enabled").checked = category["Digits"]["enabled"];
	document.getElementById("Category_MQTT_enabled").checked = category["MQTT"]["enabled"];
	document.getElementById("Category_GPIO_enabled").checked = category["GPIO"]["enabled"];
	setVisible("GPIO_item", category["GPIO"]["enabled"]);

	WriteParameter(param, category, "MakeImage", "LogImageLocation", true);
	WriteParameter(param, category, "MakeImage", "LogfileRetentionInDays", true);
	WriteParameter(param, category, "MakeImage", "WaitBeforeTakingPicture", false);		
	WriteParameter(param, category, "MakeImage", "ImageQuality", false);		
	WriteParameter(param, category, "MakeImage", "Brightness", false);		
//	WriteParameter(param, category, "MakeImage", "Contrast", false);		
//	WriteParameter(param, category, "MakeImage", "Saturation", false);		
	WriteParameter(param, category, "MakeImage", "ImageSize", false, true);		
	WriteParameter(param, category, "MakeImage", "FixedExposure", false, true);		

	WriteParameter(param, category, "Alignment", "SearchFieldX", false);		
	WriteParameter(param, category, "Alignment", "SearchFieldY", false);		
	WriteParameter(param, category, "Alignment", "AlignmentAlgo", true, true);		

	WriteParameter(param, category, "Digits", "Model", false);		
	WriteParameter(param, category, "Digits", "LogImageLocation", true);		
	WriteParameter(param, category, "Digits", "LogfileRetentionInDays", true);		
	WriteParameter(param, category, "Digits", "ModelInputSize", false);	
	
	WriteParameter(param, category, "Analog", "Model", false);		
	WriteParameter(param, category, "Analog", "LogImageLocation", true);		
	WriteParameter(param, category, "Analog", "LogfileRetentionInDays", true);		
	WriteParameter(param, category, "Analog", "ExtendedResolution", true);		
	WriteParameter(param, category, "Analog", "ModelInputSize", false);		
	
	WriteParameter(param, category, "PostProcessing", "DecimalShift", true);		
	WriteParameter(param, category, "PostProcessing", "PreValueUse", true);		
	WriteParameter(param, category, "PostProcessing", "PreValueAgeStartup", true);		
	WriteParameter(param, category, "PostProcessing", "AllowNegativeRates", true);
	WriteParameter(param, category, "PostProcessing", "MaxRateValue", true);		
	WriteParameter(param, category, "PostProcessing", "ErrorMessage", true);
	WriteParameter(param, category, "PostProcessing", "CheckDigitIncreaseConsistency", true);

	WriteParameter(param, category, "MQTT", "Uri", true);	
	WriteParameter(param, category, "MQTT", "Topic", true);	
	WriteParameter(param, category, "MQTT", "TopicError", true);	
	WriteParameter(param, category, "MQTT", "TopicRate", true);	
	WriteParameter(param, category, "MQTT", "TopicTimeStamp", true);
	WriteParameter(param, category, "MQTT", "TopicUptime", true);	
	WriteParameter(param, category, "MQTT", "TopicFreeMem", true);	
	WriteParameter(param, category, "MQTT", "ClientID", true);	
	WriteParameter(param, category, "MQTT", "user", true);	
	WriteParameter(param, category, "MQTT", "password", true);
	
	WriteParameter(param, category, "GPIO", "MainTopicMQTT", true);
	WriteParameter(param, category, "GPIO", "IO0", true);
	WriteParameter(param, category, "GPIO", "IO1", true);
	WriteParameter(param, category, "GPIO", "IO3", true);
	WriteParameter(param, category, "GPIO", "IO4", true);
	WriteParameter(param, category, "GPIO", "IO12", true);
	WriteParameter(param, category, "GPIO", "IO13", true);

	WriteParameter(param, category, "AutoTimer", "AutoStart", false);	
	WriteParameter(param, category, "AutoTimer", "Intervall", false);	

	WriteParameter(param, category, "Debug", "Logfile", true);	
	WriteParameter(param, category, "Debug", "LogfileRetentionInDays", true);	

	WriteParameter(param, category, "System", "TimeZone", true);	
	WriteParameter(param, category, "System", "Hostname", true);	
	WriteParameter(param, category, "System", "TimeServer", true);
}

function ReadParameterAll()
{
	category["Analog"]["enabled"] = document.getElementById("Category_Analog_enabled").checked;
	category["Digits"]["enabled"] = document.getElementById("Category_Digits_enabled").checked;
	category["MQTT"]["enabled"] = document.getElementById("Category_MQTT_enabled").checked;
	category["GPIO"]["enabled"] = document.getElementById("Category_GPIO_enabled").checked;
	
	ReadParameter(param, "MakeImage", "LogImageLocation", true);
	ReadParameter(param, "MakeImage", "LogfileRetentionInDays", true);
	ReadParameter(param, "MakeImage", "WaitBeforeTakingPicture", false);		
	ReadParameter(param, "MakeImage", "ImageQuality", false);		
	ReadParameter(param, "MakeImage", "Brightness", false);		
//	ReadParameter(param, "MakeImage", "Contrast", false);		
//	ReadParameter(param, "MakeImage", "Saturation", false);		
	ReadParameter(param, "MakeImage", "ImageSize", false);	
	ReadParameter(param, "MakeImage", "FixedExposure", false);	

	ReadParameter(param, "Alignment", "SearchFieldX", false);		
	ReadParameter(param, "Alignment", "SearchFieldY", false);
	ReadParameter(param, "Alignment", "AlignmentAlgo", true);

	ReadParameter(param, "Digits", "Model", false);		
	ReadParameter(param, "Digits", "LogImageLocation", true);		
	ReadParameter(param, "Digits", "LogfileRetentionInDays", true);		
	ReadParameter(param, "Digits", "ModelInputSize", false);

	ReadParameter(param, "Analog", "Model", false);		
	ReadParameter(param, "Analog", "LogImageLocation", true);		
	ReadParameter(param, "Analog", "LogfileRetentionInDays", true);		
	ReadParameter(param, "Analog", "ExtendedResolution", true);		
	ReadParameter(param, "Analog", "ModelInputSize", false);

	ReadParameter(param, "PostProcessing", "DecimalShift", true);		
	ReadParameter(param, "PostProcessing", "PreValueUse", true);		
	ReadParameter(param, "PostProcessing", "PreValueAgeStartup", true);		
	ReadParameter(param, "PostProcessing", "AllowNegativeRates", true);
	ReadParameter(param, "PostProcessing", "MaxRateValue", true);		
	ReadParameter(param, "PostProcessing", "ErrorMessage", true);
	ReadParameter(param, "PostProcessing", "CheckDigitIncreaseConsistency", true);

	ReadParameter(param, "MQTT", "Uri", true);	
	ReadParameter(param, "MQTT", "Topic", true);	
	ReadParameter(param, "MQTT", "TopicError", true);	
	ReadParameter(param, "MQTT", "TopicRate", true);
	ReadParameter(param, "MQTT", "TopicTimeStamp", true);
	ReadParameter(param, "MQTT", "TopicUptime", true);
	ReadParameter(param, "MQTT", "TopicFreeMem", true);
	ReadParameter(param, "MQTT", "ClientID", true);	
	ReadParameter(param, "MQTT", "user", true);	
	ReadParameter(param, "MQTT", "password", true);	

	ReadParameter(param, "GPIO", "MainTopicMQTT", true);
	ReadParameter(param, "GPIO", "IO0", true);
	ReadParameter(param, "GPIO", "IO1", true);
	ReadParameter(param, "GPIO", "IO3", true);
	ReadParameter(param, "GPIO", "IO4", true);
	ReadParameter(param, "GPIO", "IO12", true);
	ReadParameter(param, "GPIO", "IO13", true);

	ReadParameter(param, "AutoTimer", "AutoStart", false);	
	ReadParameter(param, "AutoTimer", "Intervall", false);	

	ReadParameter(param, "Debug", "Logfile", true);	
	ReadParameter(param, "Debug", "LogfileRetentionInDays", true);	

	ReadParameter(param, "System", "TimeZone", true);	
	ReadParameter(param, "System", "Hostname", true);	
	ReadParameter(param, "System", "TimeServer", true);	
	
	FormatDecimalValue(param, "PostProcessing", "MaxRateValue");
}

function WriteConfig(){
	ReadParameterAll();
	return setConfigParameters(param, category);
}

function FormatDecimalValue(_param, _cat, _name) {
	for (var j = 1; j <= _param[_cat][_name]["anzParam"]; ++j) {
		var _val = _param[_cat][_name]["value"+j];
		_val = _val.replace(",", ".");
		_param[_cat][_name]["value"+j] = _val;
	}
}

function UpdateAfterCategoryCheck() {
	ReadParameterAll();
	category["Analog"]["enabled"] = document.getElementById("Category_Analog_enabled").checked;
	category["Digits"]["enabled"] = document.getElementById("Category_Digits_enabled").checked;
	UpdateInput();
}

function UpdateExpertModus()
{
	var _style = 'display:none;';
	if (document.getElementById("ExpertModus_enabled").checked) {
		_style = '';
		document.getElementById("Edit_Config_Direct").style.display = ""; 
	}
	else
	{
		document.getElementById("Edit_Config_Direct").style.display = "none"; 
	}

	const expert = document.querySelectorAll(".expert");
	for (var i = 0; i < expert.length; i++) {
		document.getElementById(expert[i].id).style = _style;
	}
}

function saveTextAsFile()
{
	if (confirm("Are you sure you want to update \"config.ini\"?")) {
		var textToSave = WriteConfig();
		if (document.getElementsByClassName("invalid-input").length > 0) {
			alert("Settings cannot be saved. Please check your entries.");
			return;
		}
		FileDeleteOnServer("/config/config.ini", basepath);
		FileSendContent(textToSave, "/config/config.ini", basepath);
	}
}

function doReboot() {
	if (confirm("Are you sure you want to reboot the ESP32?")) {
		var stringota = "/reboot";
		window.location = stringota;
		window.location.href = stringota;
		window.location.assign(stringota);
		window.location.replace(stringota);
	}
}

function editConfigDirect() {
	if (confirm("Did you save your changes?")) {
		var stringota = "/edit_config.html";
		window.location = stringota;
		window.location.href = stringota;
		window.location.assign(stringota);
		window.location.replace(stringota);
	}	
}
 
LoadConfigNeu();
 
</script>
 
</body>
</html>