| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123 |
- # Reply Bot Configuration
- # See https://github.com/peaceiris/actions-label-commenter
- # Make sure to also add the response to .github/workflows/reply-bot.yml!
- # Due to the way it works, you have to add each response twice, once for the issue, once for the discussions!
-
- labels:
- #######################################################################
- # Bot Response: Documentation
- #######################################################################
- - name: bot-reply Documentation
- labeled:
- issue:
- body: |
- Please have a look on our documentation: https://jomjol.github.io/AI-on-the-edge-device-docs
- discussion:
- body: |
- Please have a look on our documentation: https://jomjol.github.io/AI-on-the-edge-device-docs
- #######################################################################
- # Bot Response: ROI setup
- #######################################################################
- - name: bot-reply ROI Setup
- labeled:
- issue:
- body: |
- Make sure to setup your ROIs properly. Have a look on our documentation: https://jomjol.github.io/AI-on-the-edge-device-docs/ROI-Configuration/#how-to-setup-the-digit-rois-perfectly
- discussion:
- body: |
- Make sure to setup your ROIs properly. Have a look on our documentation: https://jomjol.github.io/AI-on-the-edge-device-docs/ROI-Configuration/#how-to-setup-the-digit-rois-perfectly
- #######################################################################
- # Bot Response: Logfile
- #######################################################################
- - name: bot-reply Logfile
- labeled:
- issue:
- body: |
- Please provide a logfile!
- Make sure to first enable the `DEBUG` level in `Settings->Configuration->Debug->Logfile Log Level`!
- Then wait until the issue arises again.
- When you copy the log into here, please make sure to use **Fenced code blocks** by wrapping it into separate lines with ` ``` `, see https://docs.github.com/en/get-started/writing-on-github/working-with-advanced-formatting/creating-and-highlighting-code-blocks#fenced-code-blocks
- discussion:
- body: |
- Please provide a logfile!
- Make sure to first enable the `DEBUG` level in `Settings->Configuration->Debug->Logfile Log Level`!
- Then wait until the issue arises again.
- When you copy the log into here, please make sure to use **Fenced code blocks** by wrapping it into separate lines with ` ``` `, see https://docs.github.com/en/get-started/writing-on-github/working-with-advanced-formatting/creating-and-highlighting-code-blocks#fenced-code-blocks
- #######################################################################
- # Bot Response: Web Console
- #######################################################################
- - name: bot-reply Web Console
- labeled:
- issue:
- body: |
- You can use the [Web Console](https://jomjol.github.io/AI-on-the-edge-device/index.html) to get USB log from the device.
- The USB log contains more information about the startup and operation of the device than the normal Web UI log
- When you copy the log into herm, please make sure to use **Fenced code blocks** by wrapping it into separate lines with ` ``` `, see https://docs.github.com/en/get-started/writing-on-github/working-with-advanced-formatting/creating-and-highlighting-code-blocks#fenced-code-blocks
- discussion:
- body: |
- You can use the [Web Console](https://jomjol.github.io/AI-on-the-edge-device/index.html) to get USB log from the device.
- The USB log contains more information about the startup and operation of the device than the normal Web UI log
- When you copy the log into herm, please make sure to use **Fenced code blocks** by wrapping it into separate lines with ` ``` `, see https://docs.github.com/en/get-started/writing-on-github/working-with-advanced-formatting/creating-and-highlighting-code-blocks#fenced-code-blocks
- #######################################################################
- # Bot Response: Properly Format Code
- #######################################################################
- - name: bot-reply Properly Format Code
- labeled:
- issue:
- body: |
- Please make sure to use **Fenced code blocks** by wrapping it into separate lines with ` ``` `, see https://docs.github.com/en/get-started/writing-on-github/working-with-advanced-formatting/creating-and-highlighting-code-blocks#fenced-code-blocks
- This makes your code or log much easier to read!
- discussion:
- body: |
- Please make sure to use **Fenced code blocks** by wrapping it into separate lines with ` ``` `, see https://docs.github.com/en/get-started/writing-on-github/working-with-advanced-formatting/creating-and-highlighting-code-blocks#fenced-code-blocks
- This makes your code or log much easier to read!
- #######################################################################
- # Bot Response: Web Installer
- #######################################################################
- - name: bot-reply Web Installer
- labeled:
- issue:
- body: |
- You can use the [Web Installer](https://jomjol.github.io/AI-on-the-edge-device/index.html) install the firmware onto the ESP32.
- discussion:
- body: |
- You can use the [Web Installer](https://jomjol.github.io/AI-on-the-edge-device/index.html) install the firmware onto the ESP32.
- #######################################################################
- # Bot Response: Rolling Build
- #######################################################################
- - name: bot-reply Rolling Build
- labeled:
- issue:
- body: |
- You can try the latest [Automatic Build](https://github.com/jomjol/AI-on-the-edge-device/actions/workflows/build.yaml?query=branch%3Arolling+event%3Apush) of the the `rolling` or any other branch. It might already contain a fix for your issue.
- See the [documentation](https://jomjol.github.io/AI-on-the-edge-device-docs/rolling-installation) for additional information.
- discussion:
- body: |
- You can try the latest [Automatic Build](https://github.com/jomjol/AI-on-the-edge-device/actions/workflows/build.yaml?query=branch%3Arolling+event%3Apush) of the the `rolling` or any other branch. It might already contain a fix for your issue.
- See the [documentation](https://jomjol.github.io/AI-on-the-edge-device-docs/rolling-installation) for additional information.
-
-
- #######################################################################
- # Bot Response: Show Trained Digits/Pointers
- #######################################################################
- - name: bot-reply Show Trained Digits/Pointers
- labeled:
- issue:
- body: |
- See [Digital Digits](https://jomjol.github.io/neural-network-digital-counter-readout) resp. [Analogue Pointers](https://jomjol.github.io/neural-network-analog-needle-readout) for an overview of all trained data.
- If your type is not contained it can be added to our training material, see [here](https://jomjol.github.io/AI-on-the-edge-device-docs/collect-new-images/).
- discussion:
- body: |
- See [Digital Digits](https://jomjol.github.io/neural-network-digital-counter-readout) resp. [Analogue Pointers](https://jomjol.github.io/neural-network-analog-needle-readout) for an overview of all trained data.
- If your type is not contained it can be added to our training material, see [here](https://jomjol.github.io/AI-on-the-edge-device-docs/collect-new-images/).
|
