update config

firmware/dune_weaver/config.yaml

@@ -33,7 +33,7 @@ axes:
     steps_per_mm: 287
     max_rate_mm_per_min: 500
     acceleration_mm_per_sec2: 10
-    max_travel_mm: 10
+    max_travel_mm: 22
     soft_limits: false
     motor0:
       limit_neg_pin: gpio.35

firmware/dune_weaver_gold/config (DAGGKAPRIFOL).yaml

@@ -33,7 +33,7 @@ axes:
     steps_per_mm: 250
     max_rate_mm_per_min: 500
     acceleration_mm_per_sec2: 10
-    max_travel_mm: 6.25
+    max_travel_mm: 22
     soft_limits: false
     motor0:
       limit_neg_pin: gpio.35

firmware/dune_weaver_gold/config.yaml

@@ -33,7 +33,7 @@ axes:
     steps_per_mm: 270
     max_rate_mm_per_min: 500
     acceleration_mm_per_sec2: 10
-    max_travel_mm: 6.25
+    max_travel_mm: 22
     soft_limits: false
     motor0:
       limit_neg_pin: gpio.35

firmware/dune_weaver_mini/config.yaml

@@ -30,7 +30,7 @@ axes:
     steps_per_mm: 180
     max_rate_mm_per_min: 200
     acceleration_mm_per_sec2: 10
-    max_travel_mm: 6.25
+    max_travel_mm: 32
     motor0:
       hard_limits: false
       unipolar:

firmware/dune_weaver_mini_pro/config (28BYJ-48 variant).yaml

@@ -29,7 +29,7 @@ axes:
     steps_per_mm: 210
     max_rate_mm_per_min: 200
     acceleration_mm_per_sec2: 10
-    max_travel_mm: 6.25
+    max_travel_mm: 32
     motor0:
       hard_limits: false
       unipolar:

firmware/dune_weaver_mini_pro/config.yaml

@@ -33,7 +33,7 @@ axes:
     steps_per_mm: 164
     max_rate_mm_per_min: 500
     acceleration_mm_per_sec2: 10
-    max_travel_mm: 6.25
+    max_travel_mm: 22
     soft_limits: false
     motor0:
       limit_neg_pin: gpio.35

firmware/dune_weaver_pro/config.yaml

@@ -33,7 +33,7 @@ axes:
     steps_per_mm: 533
     max_rate_mm_per_min: 500
     acceleration_mm_per_sec2: 10
-    max_travel_mm: 10
+    max_travel_mm: 22
     soft_limits: false
     motor0:
       limit_neg_pin: gpio.35