"""
Reed switch monitoring module for Raspberry Pi GPIO.
Used for angular homing to detect home position.
"""
import logging
import platform

logger = logging.getLogger(__name__)

class ReedSwitchMonitor:
    """Monitor a reed switch connected to a Raspberry Pi GPIO pin."""

    def __init__(self, gpio_pin=18):
        """
        Initialize the reed switch monitor.

        Args:
            gpio_pin: GPIO pin number (BCM numbering) for the reed switch
        """
        self.gpio_pin = gpio_pin
        self.gpio = None
        self.is_raspberry_pi = False

        # Try to import and initialize GPIO
        try:
            import RPi.GPIO as GPIO
            self.gpio = GPIO

            # Set up GPIO mode (BCM numbering)
            self.gpio.setmode(GPIO.BCM)

            # Set up the pin as input with pull-up resistor
            # Reed switch should connect pin to ground when triggered
            self.gpio.setup(self.gpio_pin, GPIO.IN, pull_up_down=GPIO.PUD_UP)

            self.is_raspberry_pi = True
            logger.info(f"Reed switch initialized on GPIO pin {self.gpio_pin}")
        except ImportError:
            logger.warning("RPi.GPIO not available. Reed switch monitoring disabled.")
        except Exception as e:
            logger.error(f"Error initializing reed switch: {e}")
            logger.info("Reed switch monitoring disabled.")

    def is_triggered(self):
        """
        Check if the reed switch is currently triggered.

        Returns:
            bool: True if reed switch is triggered (pin is HIGH), False otherwise
        """
        if not self.is_raspberry_pi or not self.gpio:
            return False

        try:
            # Pin is HIGH (1) when reed switch is closed (triggered)
            # This assumes the switch connects the pin to 3.3V when closed
            return self.gpio.input(self.gpio_pin) == 1
        except Exception as e:
            logger.error(f"Error reading reed switch: {e}")
            return False

    def wait_for_trigger(self, timeout=None):
        """
        Wait for the reed switch to be triggered.

        Args:
            timeout: Maximum time to wait in seconds (None = wait indefinitely)

        Returns:
            bool: True if triggered, False if timeout occurred
        """
        if not self.is_raspberry_pi or not self.gpio:
            logger.warning("Reed switch not available, cannot wait for trigger")
            return False

        try:
            # Wait for rising edge (pin goes from LOW to HIGH)
            channel = self.gpio.wait_for_edge(
                self.gpio_pin,
                self.gpio.RISING,
                timeout=int(timeout * 1000) if timeout else None
            )
            return channel is not None
        except Exception as e:
            logger.error(f"Error waiting for reed switch trigger: {e}")
            return False

    def cleanup(self):
        """Clean up GPIO resources."""
        if self.is_raspberry_pi and self.gpio:
            try:
                self.gpio.cleanup(self.gpio_pin)
                logger.info(f"Reed switch GPIO pin {self.gpio_pin} cleaned up")
            except Exception as e:
                logger.error(f"Error cleaning up reed switch GPIO: {e}")

    def __del__(self):
        """Destructor to ensure GPIO cleanup."""
        self.cleanup()